James Hewson
Senior Sales Lead
This hands-on individual will serve a key function in helping to manage and mentor a team of engineers, lead design efforts, and develop and maintain clients for the firm. In this role, you will have the opportunity to both lead and support design and permitting efforts for a variety of land development projects, including commercial centers, residential developments, warehouse distribution centers, and mixed-use projects for both public and private clients. Job Responsibilities Work closely with office leadership to develop growth plans and ensure staff utilization;Possess an entrepreneurial demeanor and participate in Business Development activities by developing new clients for the firm and maintaining relationships with existing clients;Demonstrate experience in all aspects of land development engineering including the integration of geotechnical and environmental engineering;Knowledge of local, County and State land use entitlement processes and regulations. Familiarity with NY state and NYC land use processes a plus;Site/civil experience on a variety of project sites including the ability to design and oversee site layout, grading, drainage, infrastructure, erosion and sediment control, etc. from concept through completion;Expertise in stormwater management design, LID, hydrologic/hydraulic analysis and design and SWPPP preparation;Planning board and public testimony experience strongly preferred;Ability to design and oversee design including layout, grading, drainage, infrastructure, erosion and sediment control, etc. from concept through completion; andPosition requires work Monday through Friday with occasional evenings and weekends; andPerform other duties as requested. Qualifications Bachelor's degree in Civil Engineering, Master's degree a plus;Possess valid New York Professional Engineer licensure (can be another state if reciprocity pursued);10+ years' experience in related site/civil land development engineering;Experience in report and proposal writing;Strong client development and client management abilities;Proficiency of AutoCAD or Civil 3D (preferred) with the ability to design site layouts from concept through completion;Active participation in professional organizations;Ability to effectively work independently and in a team environment, and to mentor staff engineers;Excellent written and verbal communication skills;
Electrical Engineer with an emphasis on generation station protective relaying. Position will be responsible for the design and engineering for generation station relay replacements/retrofits and new installations. Must be eligible to get PE licensed.Desired experience includes: Proficiency in relay settings and calculations for generator, transformer, motor, feeder, and bus protection schemes with a focus on SEL, Beckwith and GE relays.Familiar with SEL, Beckwith and GE relay manufacturer softwareDesigning and reviewing drawings, including one-line diagrams, AC/DC schematics and wiring diagrams.Perform protective device coordination from 480V to 500kV relaysPerform NERC PRC evaluations and reviews (E.g., PRC-025, PRC-019)ETAP/SKM or other system analysis software knowledge.Field Testing and Commissioning is a plus (Relay testing, function trip path testing, troubleshooting, etc.)Writing test and checkout procedures.Specifying equipment such as protective relays, test switches, aux relays, CT/PTs, etc.Familiar with IEEE standards Travel RequiredYes. One or two day site visits. Occasionally provide commissioning support.QualificationsSkillsRequiredElectrical EngineerAdvancedBehaviorsRequiredDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellTeam Player: Works well as a member of a groupDedicated: Devoted to a task or purpose with loyalty or integrityLeader: Inspires teammates to follow themMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksSelf-Starter: Inspired to perform without outside helpPreferredFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsEducationRequiredBachelors or better in Electrical Engineering.ExperienceRequired5 years: 5 + years of progressive experience as a protection engineerLicenses & CertificationsPreferredProf Engineering (PE)
Job DetailsDescription We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.Electrical Engineer with an emphasis on power generation. Multi-discipline projects in hydro, gas and fossil power generating facility experience is required. Duke, TVA, Exelon, Dominion or other power industry experience is desired. Desired experience includes low voltage and medium voltage power distribution, motor controls for both low voltage and medium voltage, interfacing industrial processes to DCS and/or PLC systems and the use of power distribution system modeling software (ETAP or similar). Need to be familiar with panel design, and 3D environment.Candidate needs to be a leader, capable of coordinating engineering and design efforts, working within a team, and comfortable being in front of peers and clients leading/conducting meetings. At times job duties will require coordinating with project managers, and client to develop proposal documents and estimates to facilitate bidding on work. Work will mostly center around modifications and upgrades in existing facilities. Experience in relay protection would be a plus.Travel RequiredYes. Occasional one or two day site visits.QualificationsSkillsRequiredElectrical EngineeringIntermediateBehaviorsRequiredTeam Player: Works well as a member of a groupLeader: Inspires teammates to follow themDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellDedicated: Devoted to a task or purpose with loyalty or integrityMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsSelf-Starter: Inspired to perform without outside helpEducationRequiredBachelors or better in Engineering.ExperienceRequired4-10 years: 4-10 years of progressive experienceLicenses & CertificationsPreferredProf Engineering (PE)
Job Summary Under minimal supervision, responsible for support of NERC CIP compliance activities associated substation relaying and associated equipment.This position ensures high quality of the engineering team's deliverables verifying all documented processes and procedures are followed. These procedures are based on enforceable national standards, client and industry best practices and are uniformly applied in system protection. Primary Responsibilities1. Prepares, executes and coordinates the planning, documentation and follow up of Cyber Asset assessments (CSVA, CSV), protective (security) patching and conducts reviews confirming engineering protection and control procedures are delivered.2. Able to work in a variety of functions either in field locations or in the home office, which may include necessary activities ensuring quality processes are implemented in optimization of system/component performance and availability. Verification of in field systems either documenting as left conditions or ensuring new systems meet requirements before in service.3. Applies industry best practices in development of procedures and processes addressing quality and reliability standards requirements. 4. Works effectively in a team environment and may assume the role of team leader.5. Provides quality assurance, procedure and standards requirements guidance and recommendations to other PPL employees in support of high quality, timely and cost-effective engineering solutions to technical problems. CIP audit guidance as required.6. Builds knowledge of the organization's reliability and quality procedures and processes.7. Ensures department deliverables exceed all industry standard requirements through development and implementation of uniform processes based on industry best practices. 8. Implement industry best practices in development of efficient review processes and procedure development. Basic Qualifications1. Bachelor's Degree in engineering or science from a college or university accredited by ABET. Candidates with extensive experience and certifications in quality assurance in lieu of the specified degree will be considered.2. Minimum 5 years experience implementing a quality or reliability program, or project management involving engineering projects.3. Engineers with quality or licensing experience with generation, distribution, industrial protection, or system planning will be considered.Preferred Qualifications (some of the following)1. NERC Reliability standards expertise Cybersecurity program implementation expertise.2. Knowledge of Protection & Controls engineering3. Six Sigma Certification4. PMP Certification5. Experience in the energy industry Quality program implementation in a regulated industry such as nuclear or pharmaceuticals.
Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation. Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following: Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English. Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.
Specific Skill Sets/Notes: Background must be civil/structural in either industrial/processing plant, O&G, chemical wastewaterMust have on site field experience from the ground up - experience on construction site/preconstructionMust have working on vertically built construction plantsMin 5 years of field eng experienceNo commercial, residential, or building
Specific Skill Sets/Notes: Background must be civil/structural in either industrial/processing plant, O&G, chemical wastewaterMust have on site field experience from the ground up - experience on construction site/preconstructionMust have working on vertically built construction plantsMin 5 years of field eng experienceNo commercial, residential, or building More details to follow
This position ensures high quality of the engineering team's deliverables verifying all documented processes and procedures are followed. These procedures are based on enforceable national standards, PPL and industry best practices and are uniformly applied in system protection. Primary Responsibilities1. Prepares, executes and coordinates the planning, documentation and follow up of Cyber Asset assessments (CSVA, CSV), protective (security) patching and conducts reviews confirming engineering protection and control procedures are delivered.2. Able to work in a variety of functions either in field locations or in the home office, which may include necessary activities ensuring quality processes are implemented in optimization of system/component performance and availability. Verification of in field systems either documenting as left conditions or ensuring new systems meet requirements before in service.3. Applies industry best practices in development of procedures and processes addressing quality and reliability standards requirements. 4. Works effectively in a team environment and may assume the role of team leader.5. Provides quality assurance, procedure and standards requirements guidance and recommendations to other employees in support of high quality, timely and cost-effective engineering solutions to technical problems. CIP audit guidance as required.6. Builds knowledge of the organization's reliability and quality procedures and processes.7. Ensures department deliverables exceed all industry standard requirements through development and implementation of uniform processes based on industry best practices. 8. Implement industry best practices in development of efficient review processes and procedure development. Basic Qualifications1. Bachelor's Degree in engineering or science from a college or university accredited by ABET. Candidates with extensive experience and certifications in quality assurance in lieu of the specified degree will be considered.2. Minimum 5 years experience implementing a quality or reliability program, or project management involving engineering projects.3. Engineers with quality or licensing experience with generation, distribution, industrial protection, or system planning will be considered.Preferred Qualifications (some of the following)1. NERC Reliability standards expertise Cybersecurity program implementation expertise.2. Knowledge of Protection & Controls engineering3. Six Sigma Certification4. PMP Certification5. Experience in the energy industry Quality program implementation in a regulated industry such as nuclear or pharmaceuticals.
Position SummaryThe Construction Supervisor is the team member with the boots on the ground every day, making each hour and dollar count, ensuring that our systems are built safely and efficiently, to the client standard. This person is a problem solver, a team player, a creative thinker, an organized leader who breaks big goals into manageable tasks. This person gets the unique opportunity to spend their days working outside on a project that begins as a bare piece of land and ends with a system that produces clean, renewable electricity for a community. DUTIES AND RESPONSIBILITIES- Meets with subcontractors daily to plan and coordinate the short term goals and objectives, and develop a path forward to solve any problems.- Develops three week look-ahead schedule and works with Construction Manager and trades to ensure schedule is met.- Collects and analyzes production data in order to build productivity standards for the project and then communicates these standards to the project stakeholders.- Coordinates the arrival of deliveries and equipment to the project site with the logistics team and subcontractors.- Reviews and thoroughly understands material submittals, plans and specifications to ensure that the project is built to standard.- Leads by example and enforces company and regulatory safety policies and procedures; addresses non-compliance among all employees, subcontractors and vendors.- Knows the key operational details of the subcontract and holds the subcontractors accountable to their agreement and the company's standards.- Measures productivity, progress and performance of the subcontractors on a daily basis and completes daily activity and tracking reports. Qualifications- 3-5 years of relevant work experience, preferably in the solar industry- Bachelor's degree in a relevant field preferred- Exceptional oral and written communication skills; experience with MS Suite tools required- Must have working knowledge of civil, electrical and utility construction- Knowledge of OSHA safety standards required; OSHA 10 is a minimum requirement- Willingness to travel for projects in new and growing markets