Customer Quality Engineer
- Location: Austin
- Salary: Market related
This engineer will support the Quality Assurance team in ensuring Customer Satisfaction and enhancing the Customer Experience. Will experience working with utility scale solar trackers and Engineering, Procurement & Construction (EPC) contractors of solar plants.
Qualifications:
Education Required: Master of science or above in a relevant field of engineering (ocean engineering, naval architecture, mechanical engineering, civil/structural engineering, material science, etc.)Position start: ASAPAbout Principle PowerPrinciple Power is a leading global technology and services provider for the floating offshore wind energy market. The WindFloat®, the company's globally and proven floating platform technology, enables offshore wind turbines to be sited in any water depth or seabed condition, unlocking offshore wind potential worldwide and allowing projects to harvest the best wind resources. Principle Power acts as a trusted partner to developers, independent power producers, utilities, and EPCs, supporting its customers throughout the entire lifecycle of their projects. With 105 MW of cumulative capacity in operation or under advanced development and a multi-GW commercial pipeline globally, Principle Power is the market leader in floating offshore wind technology.General DescriptionIn the context of our multiple worldwide projects on the next generation of WindFloat® platforms, we would like to reinforce our Engineering team with a Senior Global Performance Engineer/Naval Architect. Principle Power is focused on the commercial-scale deployment of floating wind farms. The successful candidate will work on the engineering and design of the next generation of offshore floating wind turbines.The Senior Engineer is capable to carry out the engineering work with minimum guidance to share the Global Performance Group responsibilities. This position reports to the Global Performance Discipline Manager.Group DescriptionThe Global Performance Group splits its focus between the execution of engineering activities in support of current commercial projects and the execution of R&D studies to optimize the performance and ultimately reduce the cost of the WindFloat technology for future projects.MAIN ACCOUNTABILITIESGroup Responsibilities Hull global sizing based on project specific conditions (Metocean data, site/project specifics including facilities, wind turbine selected).Stability analysis for pre-service and in-service conditionsGlobal performance analysis including Design Load Case philosophy, motion analysis, airgap analysis and load calculations.Active ballast system specification and modellingInternal engineering interface with Structures, Marine Systems, Mooring/Cables and InstallationInternal interface with Project Management, Business Development, TechnologyExternal interface with wind turbine manufacturers, Classification Societies, and ClientsLoad-out and commissioning technical support during execution. Position Main Accountabilities Perform, support and/or manage Group work product delivery and ensure quality work products on commercial engineering studies and projects.Develop engineering competencies across many of the critical areas of the Group's responsibility.Support the definition, development, review and approval of design methodologies, numerical models, and design procedures/processes.Support the selection of internal or external design tools/softwareSupport discipline development and improvement initiatives, including through the management of other Engineers of the Group.Guide, train, mentor and/or develop Graduate Engineers of the Group across all technical disciplines of the Group.Facilitate Group's internal and external technical communications and interfaces. Skills & Competencies Master of science or above in a relevant field of engineering (ocean engineering, naval architecture, mechanical engineering, civil/structural engineering, material science, etc.);Proven technical skills in the field of hydrodynamics and aerodynamics. Knowledge of structure dynamics and/or mooring systems is an advantageComprehensive experience in performing aerodynamic and hydrodynamic analysis, design and engineering deliverables;Minimum five (5) years of professional experience in the design of floating offshore structures for pre-FEED/FEED/Detailed design. Design of floating wind platforms would be an advantage;Minimum three (3) years of professional experience working with hydrodynamics and aerodynamics tools such as Rhino, Orca3D, WAMIT, OrcaFlex and openFAST or equivalent software.Proficiency in the programing languages (Python or Matlab)Strong technical skills (numerical modeling and data analysis)Strong communicator (written and oral), especially for technical topics.Systematic and detail-oriented;Ability to deliver high-quality outputs under pressure;Proactive and self-motivated; Other requirements Proficient with Written and Spoken EnglishProficient with Technical Written and Spoken English and in producing all technical documents and/or reportsAuthorized to work in the location you apply to
Engineering Manager The position is to be filled for an undetermined period of time. Your tasks: Independent set-up and control of an engineering team within projects (engineering management) Implementation and coordination of construction projects in connection with process engineering/power plant-specific tasksPreparation of project phase-dependent documents (terms of reference, tenders, etc.)Preparation of cost estimatesParticipation in project meetings, negotiations, evaluation of bids and preparation of award recommendationsEnsuring quality assurance and quality control during the planning, tendering, construction and operation phasesSelecting and specifying CHP plant and heating plant components in accordance with international regulations and standards as well as internal Vattenfall standardsParticipation in inter-project and inter-departmental exchanges of experiencePreparation of meeting reports and presentationsIn this role, you report to the Project Manager within a project and to the Manager Execution Engineering, be a sparring partner for the project manager and the rest of the project management teamUsing "people Skills" to build and motivate engineering teams. Your profile Degree in process engineering, mechanical engineering, electrical engineering or power plant engineering and at least 5 years of professional experience in planning and project management. Experience in the operation of heating and combined heat and power plants is an advantageYour professional skills include a sound knowledge of power plant-specific processes in heat generation plants as well as the interface of generation plants to district heating networks, CCS is a plusYour personal competencies include leadership qualities and excellent analytical skillsYou work in a structured manner, are self-initiated and have good communication skillsGood focus on safety and safety in designYou have a very good command of Swedish and EnglishYou have experience in planning and engineering processes as well as in teamwork, including cultural sensitivityWorking on interdisciplinary topics and interfaces with other departments are obligatory for youTravelling is not a problem for you. Engineering Manager The position is to be filled for an undetermined period of time. Your tasks: Independent set-up and control of an engineering team within projects (engineering management) Implementation and coordination of construction projects in connection with process engineering/power plant-specific tasksPreparation of project phase-dependent documents (terms of reference, tenders, etc.)Preparation of cost estimatesParticipation in project meetings, negotiations, evaluation of bids and preparation of award recommendationsEnsuring quality assurance and quality control during the planning, tendering, construction and operation phasesSelecting and specifying CHP plant and heating plant components in accordance with international regulations and standards as well as internal Vattenfall standardsParticipation in inter-project and inter-departmental exchanges of experiencePreparation of meeting reports and presentationsIn this role, you report to the Project Manager within a project and to the Manager Execution Engineering, be a sparring partner for the project manager and the rest of the project management teamUsing "people Skills" to build and motivate engineering teams. Your profile Degree in process engineering, mechanical engineering, electrical engineering or power plant engineering and at least 5 years of professional experience in planning and project management. Experience in the operation of heating and combined heat and power plants is an advantageYour professional skills include a sound knowledge of power plant-specific processes in heat generation plants as well as the interface of generation plants to district heating networks, CCS is a plusYour personal competencies include leadership qualities and excellent analytical skillsYou work in a structured manner, are self-initiated and have good communication skillsGood focus on safety and safety in designYou have a very good command of Swedish and EnglishYou have experience in planning and engineering processes as well as in teamwork, including cultural sensitivityWorking on interdisciplinary topics and interfaces with other departments are obligatory for youTravelling is not a problem for you.
As an Offshore Foundation Structural Assessment Senior Engineer F/M you will be involved in delivering multi-level ongoing projects in the offshore wind whilst looking at the wider renewable energy business in general, contributing and developing broader technical solutions for business.You'll be part of an enthusiastic and committed team of Engineers and Technicians to deliver high-quality output on projects. Client care and repeat business are crucial to success. This means you enjoy developing and nurturing relationships with clients.You will have a good understanding of the technical engineering requirements of offshore wind turbine structures. As an Offshore foundation structural assessment senior engineer, you will be Performing structural calculations mainly using the finite element calculation method (FEA) to include: Analysis of Structural ModelsMonitoring calculations and detailed drawingsSelection of load cases (environmental conditions, a turbine in production/shutdown, etc.)Post-processing of extreme loads and fatigueAnalysis of the results and recommendations on the designData flow managementEnsuring technical compliance with the relevant regulations and client specificationsCompletion and delivery of high-quality technical reports. and you will carry out the dimensioning of structures: In the pre-design, design, basic, and detailed engineering phases (typically offshore jacket/monopile wind turbine foundation).Analysis of structural designs and gradually develop expertise in a wide range of offshore structures including static & dynamic analysis, fatigue analysis, impact analysis, fracture mechanics, Finite Element Analysis, wave dynamics, seismic design, engineering materials, etc. The role is based in Nantes, France, and the incumbent will have the right to work and reside in France.In this hybrid role, you will have a defined work location that includes remote work from home, in the office, and offshore/on-site as agreed with your manager.Flexibility to working hours and willing travel locally and internationally may be required occasionally.What we are looking forWe are looking for a determined, results, and client-oriented professional with a supportive and global mindset, and excellent interpersonal skills. The successful candidate should be passionate about innovation, and progress and enjoys working in a dynamic and multicultural environment both independently and as part of a team. In addition, you: Hold a Master's degree (or equivalent):structural mechanics and/or solid mechanics.Have at least 3 years of experience in the offshore field (Wind or Oil & Gas) in the dimensioning of offshore foundation structures, mainly of the jacket or monopile type.Will have Knowledge of mechanical characteristics of metal/concrete/composite materials (RDM).Have an in-depth understanding of at least 1 of the following: ANSYS / SACS / ABAQUS / SESAM.Knowledge and/or practice of standards such as DNV-GL, IEC, API, AISC, and Eurocodes.Are fully proficient in English, and French is an advantage.Practice in code checking, yielding, buckling, and fatigue, in ULS, FLS, and ALS conditions could be an additional advantage.
Key ResponsibilitiesThe key responsibilities include the following: Planning of outages on the main Combined Cycle Gas Turbine plant and Open Cycle Gas Turbine plant and other major items of plant.Development of contingency plans associated with the aboveReview of contracts, programmes, project and commercial documentation associated with outagesProgress and reporting on all planned and unplanned outagesEnsuring plans meet safety, environmental, technical, and commercial targetsCo-ordination of day-to-day maintenance planning activities.Managing site specific projects that have defined time or functional start and end criteria. These may include CAPEX projects, plant investigations, technical and commercial project assignments, audits etc.Manage and develop site based computerised maintenance management systems to suit business and plant needsDevelop and test site Business Continuity PlansCoordinate the preparation of monthly reports, business reviews and associated follow up actions.Develop procedures and plans in the above areas to support the stations ISO quality standards Knowledge, Skills and ExperienceEssential Experience in a power plant or similar process industry in a commercial environment is considered essential.It is expected that the incumbent would have good interpersonal skill and have the ability to manage and lead projects, coordinate activities, chair meetings, and manage unplanned changes.The incumbent would be expected to prepare reports to suit recipients at different levels of the organisation and make presentations as required. Desirable Working experience in the use, development and management of planning software and computerised maintenance management systems would be an advantage. QualificationsIt is desirable that the incumbent has 3rd level qualification in engineering or a related technical/science based subject.
Job Title - Geotechnical Engineer.Location - Glasgow, hybrid working structure.Job Overview:In this role, you'll be part of the Ground Engineering team helping to deliver a range of projects across the UK for market sectors including highways, water, energy, rail and development. The team provides a wide range of geotechnical design services across the full project life cycle including feasibility studies, ground investigations, geotechnical interpretation, preliminary and detailed design, and construction supervision for geotechnical works.The successful candidate will have experience working in a UK geotechnical consultancy and the following skillset: Knowledge of geotechnical engineering principals and practice.Experience of planning and supervising ground investigations.Geotechnical reporting.Geotechnical design analysis and reports.Preparation of contract drawings, specifications and schedules in compliance with UK standards. Requirements: BEng/MEng in Civil Engineering or BSc/MSc in Engineering Geology or Earth Science.MSc in Geotechnical Engineering or a related applicable field is desirable. If you feel the above criteria applies to you, please do not hesitate to apply.
I am looking for a Portfolio Grid Engineer for one of our clients, the world's largest independent renewable energy company specialising in Wind and Solar.Your responsibilities: Develop, review and enhance the Grid strategy concerning renewable assets managed by UK&I Asset Management Team.Monitor any changes to Grid regulation, policies and ancillary services as they may apply to Support Services client assets. Typical areas of interest will include, as a minimum, grid charging, NGESO pathfinder tenders, NGESO ancillary service procurement, DS3 services, DSO services.Join regular meetings with UK&I Energy networks Team and share information with UK&I Asset Management teamUnderstand and interpret client needs, communicating client goals to internal and external stakeholdersCoordinate the end-to-end delivery of Grid related services and one-off projects on behalf of clients.Be the first point of call for technical grid connection agreement or grid compliance queriesEnsure all Grid related activity is linked back to the client specific Value Enhancement Plans – demonstrating the value of RES as AMHave a commercial awareness of the existing Asset Management Agreements and identifying which elements of our Grid services are in or out of scopeLead on areas of personal expertise as part of the Operations Support Team goals and Manage ad-hoc Grid queries from the Asset Managers. Active participation in Continuous Improvement and innovation projects. Minimum requirements: Knowledge of wind turbine, battery energy storage systems and solar technology, health and safety management systems, quality and environmental management systems and work control proceduresElectrical Safety rules in the context of Renewable Energy InfrastructureHV Electrical Equipment and Industry StandardsGrid related regulations, policies and industry consultations for distribution, transmission or ICP connected renewable generationCDM RegulationsDeal with Grid related issues on operational renewable asset The role is a full-time, permanent position with office locations throughout the UK offering hybrid working and a competitive/lucrative package on offer for the right candidate. Combined with professional development opportunities, this is the perfect position to take the next step towards your career ambitions and work in a strong and collaborative team!If this sounds like a position you would be interested in exploring further, please reach out via the details below or apply via the link.T: 0141 212 4803E: orlagh.fleming@spencer-ogden.com
Job Title - Principal Geotechnical Engineer.Location - Edinburgh, hybrid working structure.Job Overview:In this role, you'll be part of the Ground Engineering team helping to deliver a range of projects across the UK for market sectors including highways, water, energy, rail and development. The team provides a wide range of geotechnical design services across the full project life cycle including feasibility studies, ground investigations, geotechnical interpretation, preliminary and detailed design, and construction supervision for geotechnical works.This role could be either an Senior Engineer or Principal Engineer level role depending on your skills and experience.The successful candidate will have experience working in a UK geotechnical consultancy and the following skillset: Knowledge of geotechnical engineering principals and practice.Experience of planning and supervising ground investigations.Geotechnical reporting.Geotechnical design analysis and reports.Preparation of contract drawings, specifications and schedules in compliance with UK standards. Requirements: BEng/MEng in Civil Engineering or BSc/MSc in Engineering Geology or Earth Science.MSc in Geotechnical Engineering or a related applicable field is desirable.Chartered Engineer (IEng/CEng) or Geologist (CGeol) status is desirable. If you feel the above criteria applies to you, please do not hesitate to apply.
Job Title - Principal Geotechnical Engineer.Location - Glasgow, hybrid working structure.Job Overview: In this role, you'll be part of the Ground Engineering team helping to deliver a range of projects across the UK for market sectors including highways, water, energy, rail and development. The team provides a wide range of geotechnical design services across the full project life cycle including feasibility studies, ground investigations, geotechnical interpretation, preliminary and detailed design, and construction supervision for geotechnical works.This role could be either an Senior Engineer or Principal Engineer level role depending on your skills and experience.The successful candidate will have experience working in a UK geotechnical consultancy and the following skillset: Knowledge of geotechnical engineering principals and practice.Experience of planning and supervising ground investigations.Geotechnical reporting.Geotechnical design analysis and reports.Preparation of contract drawings, specifications and schedules in compliance with UK standards. Requirements: BEng/MEng in Civil Engineering or BSc/MSc in Engineering Geology or Earth Science.MSc in Geotechnical Engineering or a related applicable field is desirable.Chartered Engineer (IEng/CEng) or Geologist (CGeol) status is desirable. If you feel the above criteria applies to you, please do not hesitate to apply.
Technical Solutions Engineer We have partnered exclusively with a leading global operator specialised in the complete management of solar and wind assets for the generation of electricity.As Technical Solutions Engineer, you will be responsible for designing, engineering and optimising utility scale energy storage systemsYour duties will include, but not limited to the following: Preparing electrical equipment specifications, data sheets, and bid evaluations for storage systems, inverters, switchgears, transformers, and other equipment as requiredProviding guidance on design concepts around short circuit protection, conductor sizing, thermal systems, safety systems etc.Participating in site and factory acceptance tests;Liaise with project stakeholders to ensure designs meet expectations;Perform various calculations and analysis to ensure project efficiency;Grid connection analysis and preparation of technical documentation. Skills and experience required: Bachelor’s degree Electrical Engineering.4 years of experience designing and modelling electric systems (HV & MV).Experience within renewables and/or energy efficiency projects. If you feel the above criteria applies to you, please do not hesitate to apply.
The main duties and responsibilities of the role will include the following: Provide professional, cost effective and value adding electrical engineering services within Renewable Energy Business Units. The candidate should possess a strong knowledge of renewable energy and practical experience of managing connections to the Irish transmission system, and be well-versed in current Irish grid connection policy and regulation;Lead the delivery of project electrical engineering works and services. Manage the interaction with ESB Networks, Eirgrid, electrical & civil contractors, and other contractors and project stakeholders. Actively attend and participate in team meetings, site meetings and design meetings, to ensure projects are delivered on-time, on-budget and in line with statutory Health and Safety requirements. Lead and co-ordinate project energisations and construction related grid outages and manage grid code compliance testing associated with any new HV installation required to demonstrate compliance under the terms of its connection agreement;Lead engineering and optioneering processes of potential grid connection solutions for Renewable Energy projects. Prepare and procure analysis of the Irish Transmission system to identify the most feasible commercial grid connection options for live projects. Identify and apply Grid Code requirements to grid connection solutions, disseminate changes to Grid Code and connection policy to Renewable Energy Projects;Review and / or prepare technical project, tender and contract documentation to monitor, control and reduce cost. Monitor and analyse all elements of design, manufacture, processing, construction, operation, and maintenance to ensure delivery of current project requirements, including meeting obligations under any associated grid connection agreements. Identify and co-ordinate all stakeholders throughout project and service delivery to ensure that project and service key performance indicators are achieved. Enable sufficient, timely and appropriate information exchange between all stakeholders throughout project / service development and delivery to ensure that deliverables and KPI's are understood and any risks or opportunities are monitored and reviewed to achieve the best project / service results. Monitor against the project plan and take remedial action to recover project overruns to ensure cost effective professional engineering services are delivered;All employees are expected to co-operate fully with all provisions taken by the company for ensuring Health, Safety and Welfare of themselves, fellow employees, and members of the public. Identify, understand, and apply all Health & Safety legislation and regulatory requirements as a fundamental element of any construction design or undertaking ensuring safety of employees and members of the public during construction, testing, commissioning and operation;Proactively participate in the Performance Management process to ensure delivery of own, and the wider team's, objectives. The ideal candidate will possess the following qualification, skills, knowledge and attributes: Hons Degree (Lvl 8 FETAC) in Electrical Engineering essential; Post-Graduate (Lvl 9 FETAC) qualification in a relevant discipline would be an advantage for this role;7 years’ experience managing the grid connection process for transmission connected projects in the generator or utility sector; Significant technical experience of HV electrical design and consenting of 110/220/400 kV infrastructure, HV cable (≥ 110 kV) experience, verifying / approving third party design, contract Management, financial /cost management and project management required;Excellent technical report writing and communications skills essential; Proficient in AutoCAD and PSSE or other similar electrical design software would be an advantage
My Client is resourcing for a Solar Design Engineer, this is an extremely exciting opportunity to manage, plan and execute engineering support on solar energy installations. Projects are located throughout the UK and Ireland. Previous Solar UK experience is required with overseas experience a bonus. In this Role you Will: · You will lease directly with the project management team across full lifecycle of the project · You will plan solar projects in the utility scale megawatt range and undertake yield assessments · You will develop designs for projects in development liaising directly with the development team The role has a fantastic salary, bonus and benefits package.
Job Overview: The role demands a dynamic and enthusiastic Consultant with experience of working in multi-discipline teams through various design phases, as well as having an active interest in assisting clients and the wider energy industry through the transition to Net Zero.Due to continued and expected growth with our onshore engineering capability we are looking to strengthen our onshore Civils Engineering capability.The role will also demand the candidate to be adaptable to varying assignments at short notice and multi-task for delivery of concurrent assignments, as required, as well as be able to convey the Company's competencies, vision and values to internal and external clients.Key Responsibilities and Duties: Production of calculations, specifications, and drawings for a wide variety of projects.FEED and Pre-FEED multi-discipline studies.Cut and fill optimisationDrainage solutionsRoad/pavement layout and designReinforced concrete design Requirements: Engineering Degree in Civil Engineering or equivalent3+ years experience with good Civil Engineering knowledge, ideally aligned to Oil & Gas / Energy industriesDemonstrable experience of supporting studies from conceptual engineering up to and beyond FEEDPreparation of material estimates and specifications.Experience in reviewing impact on existing site designs, determination of constructability methodologyAbility to identify project risks and prepare mitigation plans.Experience in development engineering scopes of works (SOW) & CTR hour estimates If you feel the above criteria applies to you, please do not hesitate to apply.