- Location: Kansas City
- Salary: Market related
As an I&C engineer, work with a team of I&C engineers and designers, and other disciplines, to perform detail engineering, including front-end planning work, develop I&C quantities and cost estimation, conduct conceptual studies, perform technical quality reviews, attend Factory Acceptance Testing (FAT), and support construction & commissioning activities . Work under a direct supervision of an I&C lead or work independently on smaller projects or standalone activities.
- Knowledge of instrumentation and control systems (PLC/DCS) is required.
- Prepare instruments and control system specifications, instrument inquiry/bid packages, technical bid summaries, and purchase recommendations.
- Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.
- Participate in the development of P&ID's and equipment/construction subcontract package specifications.
- Develop instrument index, I/O list, cause & effect and logic diagrams, and control narratives.
- Work with the India I&C team and other disciplines to produce I&C engineering and design deliverables.
- Work with clients and vendors for information required to complete engineering design deliverables on schedule and building long working relationship.
- Interface and support construction personnel directly from the office and support construction and pre-commissioning activities in the field, as required.
- Work with SmartPlant Instrumentation (SPI) and other smart tools to produce engineering and design deliverables.
- Able to support construction and startup & commission activities in the field, as required
- Bachelor's degree in Electrical Engineering, Mechanical Engineering or Chemical Engineering from accredited program required.
- Engineer-In-Training (EIT) Certification recommended.
- 3 years related experience. Completion of master's degree in related field may be substituted for one year of experience.
- Strong analytical and problem-solving skills.
- Attention to detail.
- Ability to clearly communicate both verbal and written technical information.
- Must be proficient in the use of computer software (i.e., MS-Word, Excel, PowerPoint, Access).
- Valid driver's license required.
- Must be willing and able to obtain, or currently hold a valid Transportation Worker Identification Credential (TWIC).
- Salary$130k - 150k per year + W2 employment, employer paid medical and dental
**this is a 6 month contract to direct hire opportunity100% remote- work from home anywhere within the United States**NO sponsorship available! Only US based candidates apply! Overview:As a Senior Protection & Control Engineer, you will be responsible for designing and implementing protection and control engineering activities for high voltage substation and transmission projects. You will utilize your knowledge of protective relaying and control systems to contribute to EPC substation and transmission projects.Responsibilities:• Perform analysis and design of Protection Systems for HV substation/ and FACTS • Develop substation relaying & metering diagrams (i.e. Single line/A.C./D.C. schematic diagrams) • Develop the substation communication and network diagram • Prepare specification & Bill of Material for Protection/Control/Metering/RTU/ Communication Panels • Develop Protection and Control Panel layouts. • Develop Protection and Control Panel wiring diagrams. • Develop Cable Schedule for Substation. • Perform Factory Acceptance Test for Protection and Control Panels. • Perform reviews of work performed by others • Work closely with other engineering and design team members to coordinate overall design package and requirements • Perform relay coordination study and develop the relay settings file • Coordinate with supplier and contractors • Flexibility to travel locally and internationally to customer meetings and project sites, with an approximate travel of 25%.Qualifications:• Bachelor's degree in Electrical Engineering with a power systems emphasis from an ABET-accredited engineering program; Master's degree preferred. • 8 years or more of experience with a focus on protection/control/communications design for high voltage substations. • Experience in Communication Network Technologies • Experience in Communication protocols such as IEC61850, DNP, Modbus, … • Experience in writing and providing support documentation for relay calculations. • Knowledge on ANSI standards, IEC standards knowledge is a plus. • Experience with various vendor protective relay equipment typically used in substation. protection, including SEL, Siemens, GE. • Familiarity with Auto-CAD or Micro-Station. • Good communication skills. • Professional Engineering license is preferred. • Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers.
- Salary$60 - 75 per hour + Full benefits (medical, dental, vision, 401k)
- LocationGreenwood Village
Seeking a REMOTE Lead P&C Substation Engineer. We are looking for talented and enthusiastic engineers with a startup mentality who are ready to grow with us.Description: Lead in preparation of proposals and scope developmentLeading project teamsConceptual designs and execution plansEngineering/project cost estimates and schedulesPerforming, leading teams, and QA/QC in protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiringCalculations and QA/QC for studies and reports (grounding, lightning protection, AC/DC load studies, etc.)Develop and improve processes, tools and/or technology implementationsProvide leadership, training and mentoring to less experienced engineers and team members Basic Qualifications: Minimum of a BSEE in an ABET accredited schoolProfessional Engineering License (PE) highly desiredStrong experience in Protection & Controls design in substation engineering - SCADA or RelaysResides in the USA and able to work in the USA without sponsorship Preferred Qualifications: Minimum of 8 years of industry experience with a focus on Protection and Controls designExperience in leading projects and teams, and mentoring less experienced engineers
- Salary$52 - 67 per hour
- LocationBorough of Portland
Qualifications (IE SAP Experience, Excel Knowledge, Any Certifications, Years of Experience in Certain Fields): Rockwell Automation Products (Studio5000, FactoryTalk View SE/ME, ThinManager), Virtual Machines, OT Network familiarityThe Controls Engineer will be responsible to apply engineering principles independently to all aspects of design, programming, and troubleshooting of automated industrial control systems.The Engineer will have deep and broad competency in process automation of chemical plants using PLC and SCADA systems.Responsibilities include but are not limited to:Capable of developing, implementing and supporting plant control system hardware, software and field instrumentation in an efficient and safe manner.Effective at troubleshooting control system hardware and software and implementing corrective actions independently.Actively participates in Design Reviews and PHAs as a team member or leaderPLC, DCS and SCADA control system configuration and programmingWorking with highly hazardous chemicals at a manufacturing facilityAssisting with design documentation upkeep (e.g. PFDs, PIDs, equipment and instrument specification sheet, process package, MOC, interlock matrix, functional design specification) for both new and existing facilities while following department standardsCapable of assisting with loop tests, and interlock tests performed for new processes and for yearly ISO testing for calibration and interlock checksDeep understanding of electrical distribution and power loading in industrial control systemsComplete all assigned tasksRequired -Bachelor's degree in chemical, mechanical, or electrical engineering,or equivalentAt least 5 years of relevant experience, including programming PLC/DCS for chemical plant design and operation as well as process data collection and distribution for wider corporate useKnowledge and experience of instrument engineeringCandidate should have knowledge of applicable codes and standards for process control hardware and software (e.g. UL listing, NEC, etc.) as applied to hazardous materials handling and manufactureExperience with Allen-Bradley ControlLogix hardware and softwareExperience with FactoryTalk View ME/SEAbility to develop and interpret electrical schematicsExperience with developing and deploying ethernet based industrial networksPreferred -Experience with Siemens automation systems hardware and softwareExperience with Siemens PCS-7Experience in a rapid-growth environmentTrained in standard procedures for safe gas and chemical handlingChemical plant operation experience strongly preferredStrong organizational and planning skills with the ability to multi-taskTeam player with leadership abilities.Self-starter with the ability to perform well under pressure and continuously changing prioritiesProblem solving and decision making skillsExcellent verbal and written communication skills
- Salary$0 per year
Specific Skill Sets/Notes: Background must be civil/structural in either industrial/processing plant, O&G, chemical wastewaterMust have on site field experience from the ground up - experience on construction site/preconstructionMust have working on vertically built construction plantsMin 5 years of field eng experienceNo commercial, residential, or building
- Salary$85k - 135k per year + Full benefits (medical, dental, vision, 401k)
- LocationGreen Bay
Position Purpose: To provide oversight, schedule coordination, management guidance, and technical expertise for all project controls and reporting aspects between the client and American Transmission Company (ATC). Essential Responsibilities § Work closely with customer to ensure seamless communication for the planning and construction controls aspects of ATC Alliance electrical utility projects§ Delegate activities and responsibilities while ensuring appropriate levels and assignments of accountability are defined and understood among the dedicated ATC Controls team§ Lead and develop the ATC Controls team with the understanding of Primavera P6 scheduling and critical path method of construction schedule activities and sequence to develop and update internal and external schedule tracking§ Work closely with project management to understand project scope, cost budget, timeline, and assumptions to effectively build the baseline schedule and incorporate updates with minimal additional operational input§ Work with ATC and project management to develop resource loaded construction schedules using critical path method in Primavera P6§ Familiarity with the Defense Contract Management Agency's 14-point schedule quality assessment check§ Monitor cost/schedule performance through monthly progress updates and detailed variance analysis. Analyze impacts of variances and establish corrective actions as needed.§ Oversee all ATC reporting and audit deliverables§ Support the development and implementation of common systems and processes to provide for proper accounting, reporting of project costs, customer billing, scheduling, material procurement, record keeping, documentation and budgeting for ATC Alliance projects§ Stay current on construction management trends and ensure Project Management personnel are informed of significant changes§ Travel to jobsites may be necessary for coordination with project teams and customer Knowledge | Skills | Abilities § Must possess extensive knowledge in Primavera P6 scheduling software§ Proven communication, organizational and interpersonal skills§ Ability to anticipate and meet internal customer needs§ Ability to provide oversight to numerous projects throughout the ATC Alliance portfolio§ Must possess extensive comprehension and expertise of financial and productivity accounting terminology and tracking methods, KPI's and Earned Value.§ Must be familiar with JD Edwards, EcoSys, ProCore§ Capable of delegating activities, responsibilities, and authorities, ensuring appropriate levels and assignments of accountability are defined and understood.§ Extensive project controls skills with a track record of achievement of complex projects.§ Ability to work with Operations and Finance to identify and meet project and financial needs.§ Ability to work independently and meet deadlines§ Extensive knowledge of Microsoft Office products; Outlook, Excel, Access, Project Qualifications § BS/BA in Engineering, Construction Management, or equivalent experience§ 5-10 years of cost and scheduling experience in the construction industry§ Supervisory Experience Preferred Work Environment § Must be able to remain in a stationary position over 50% of the time§ The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc§ Continuously operates a computer and other office productivity machinery, such as a calculator, copy machine, scanner, and computer printer§ The person in this position frequently communicates with employees and coworkers and must be able to exchange accurate information in these situations§ Occasionally lifting 20 pounds
- Salary$0 per year
- LocationBasking Ridge
Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation. Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following: Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English. Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.
- SalaryMarket related
Position of: Electrical, Instrumentation & Control Manager Scope of Responsibility includes: - • Establishing electrical operation concept, schematic drawings for HV panels, LV MCC & LV DB’s from single line diagram • Good understanding of 66/11kv, 115/11kv, 22/11kv switchgears, control panel and metering panels • Reviewing of offers/drawings for technical compliance, preparation of instrumentation I/O list, cable sizing & termination schedule preparation. Co-ordination with suppliers on design approvals and FAT & SAT • Supervision of installation, erection, testing and commissioning sub-contractors. Co-ordinate with customers to make changes related with approval drawings. • Pre-commissioning testing of various protection relays of Generator, Transformer, Motor & Feeder Protection of ABB, Schneider, Areva, GE, Reyrolle, Siemens make with following functions. • Trouble shooting and maintenance of all kinds of field instruments which are related to DCS & SCADA system • Provides technical, trouble shooting and maintenance support to all electrical equipment and instrumentation, including low/medium/high voltage substations, switchgear, transformers, motors, distribution systems and associated protection and support equipment. • Testing of Current, Voltage & Power transformers, MV/HV/LV circuit breakers, and Control & Protections schemes with complicated interlocking schemes. • Develop engineering capabilities and work with sales team on project proposal and bidding • Preferably with knowledge in Diesel Generator, Control Panel modification, commissioning and testing. Knowledge in Water Treatment System, Boiler, Turbine, Fuel Handling System, Fuel Preparation System is an added advantage. Requirements • Degree in Science in electrical engineering with emphasis on power systems • Min. 5 years of working experience in renewables, power generation, power systems design or similar field. • PE Certificate is an added advantage • Ability to perform detail-oriented, critical reviews of technical documentation • Ability to work in a fast-paced start-up environment • Strong analytical and trouble shooting skills • Ability to write technical reports in English and proficient in MS Office • Quality, Health, Safety and Environment (QHSE) mindset • Travelling/Site stationed is required Interested applicants please send CV to email@example.com
- SalaryMarket related
Responsibilities Assist process engineering design and coordinate process engineering deliverables with Engineering firm Including, but not limited to: Review vendor equipment approval drawings with focus on interface management between vendorsReview/approve PIDs generatedReview/approve PFDs generatedReview/approve Area Process Narratives/Functional descriptionsReview/approve Equipment specificationsReview/Approve Instrumentation specificationsReview/approve project Basis of Technical DesignReview/approve mass and energy balancesPerform project engineering role with focus on schedule and on facilitating clear communication between the various stakeholders on technical barriers to design advancement.Support construction efforts by answering technical questions and providing quality control oversight on installation and startupAssist with equipment layout developmentProvide technical assistance to procurement and project management with equipment bidding process, including package documentation, bidding, Total Cost of Ownership (TCO)s and bid comparisons. Generate project mass and energy balancesReview and provide feedback on equipment, line, valve, specialty item and instrumentation lists generated by Engineering firm.Ensure project compliance with engineering and equipment standardsApply process safety management (PSM) experience to assist with items such as management of change (MOC) and pre-start up safety reviews (PSSR).Interface effectively with commercial, safety, accounting, legal, environmental, engineering, QA/QC, process safety management, and procurement to assist with project needs.Develop plans for commissioning/start-up and assist in executing same. Education/Experience/Skills Required Bachelor’s degree in Engineering or applicable related field.5 to 10 year total industry experienceMinimum of 5 years experience with field work or operations or constructionMinimum of 5 years experience working with Process Safety principlesExperienced in using TEAMS, Microsoft Word, Microsoft Excel, Visio and PowerPointExperienced in using Navisworks 3D viewing softwareBuilds Shared Vision
- SalaryMarket related
The ideal candidate for Senior Electrical Engineer will be responsible as the Technical Support Engineer to facilitate asset reliability and ensures uptime of the vessels; in line with the Company's key business goal. Provide drilling fleet technical supportAssist and lead on technical downtime issuesLiaise with OEM'sInvolved with annual equipment inspectionReview vendor quotations and costings for major equipment repair. Prepare overhaul work-scope for major equipment to ensure OEM correct and accurate pricings on repairs and overhaulsPrepare repair work-scope for capital equipment (5 yearly)Regularly review, development and updating of the planned maintenance system (Star) for electrical equipmentTravel offshore to assist in technical problem solving, repairs & troubleshooting as requiredAssist with annual budget preparation for capital equipment expendituresAssist with and ensure compliance of TMOC procedureAttend equipment D&I/commissioning at vendor facilityAssist with client related technical issuesCarry out rig internal technical auditsAssist Projects/Newbuilds EngineersAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all electrical rig systems and controls fleet wideBe prepared to travel worldwide at short notice as and when required Candidate should fulfil the following: Preferably a Degree in Engineering (Hons) in Electrical & ElectronicsMinimum 10 years of experience holding the role of technical support and/or project engineering in O&G industryTrained in the following: LTI Driller/ Draw works Control Course; LTI Top Drive Control Course; Advance Siemens PLC STEP 7 Programming Course; Siemens & ABB VFD Course; Siemens PLC STEP 7 Programming Course; TDS- 8SA Top Drive Course; C++ Programming; MD Totco Drilling Instrumentation Course; Ex Certified; NOV Amphion Control System; HVAC CertificateExperience in offshore drilling or upstream industry with hands-on experience in drilling systems is a plusHighly skilled and efficient trouble shooter
- Salary$0 per year
Job Summary Under minimal supervision, responsible for support of NERC CIP compliance activities associated substation relaying and associated equipment.This position ensures high quality of the engineering team's deliverables verifying all documented processes and procedures are followed. These procedures are based on enforceable national standards, client and industry best practices and are uniformly applied in system protection. Primary Responsibilities1. Prepares, executes and coordinates the planning, documentation and follow up of Cyber Asset assessments (CSVA, CSV), protective (security) patching and conducts reviews confirming engineering protection and control procedures are delivered.2. Able to work in a variety of functions either in field locations or in the home office, which may include necessary activities ensuring quality processes are implemented in optimization of system/component performance and availability. Verification of in field systems either documenting as left conditions or ensuring new systems meet requirements before in service.3. Applies industry best practices in development of procedures and processes addressing quality and reliability standards requirements. 4. Works effectively in a team environment and may assume the role of team leader.5. Provides quality assurance, procedure and standards requirements guidance and recommendations to other PPL employees in support of high quality, timely and cost-effective engineering solutions to technical problems. CIP audit guidance as required.6. Builds knowledge of the organization's reliability and quality procedures and processes.7. Ensures department deliverables exceed all industry standard requirements through development and implementation of uniform processes based on industry best practices. 8. Implement industry best practices in development of efficient review processes and procedure development. Basic Qualifications1. Bachelor's Degree in engineering or science from a college or university accredited by ABET. Candidates with extensive experience and certifications in quality assurance in lieu of the specified degree will be considered.2. Minimum 5 years experience implementing a quality or reliability program, or project management involving engineering projects.3. Engineers with quality or licensing experience with generation, distribution, industrial protection, or system planning will be considered.Preferred Qualifications (some of the following)1. NERC Reliability standards expertise Cybersecurity program implementation expertise.2. Knowledge of Protection & Controls engineering3. Six Sigma Certification4. PMP Certification5. Experience in the energy industry Quality program implementation in a regulated industry such as nuclear or pharmaceuticals.
- SalaryMarket related
Position Summary To provide technical equipment engineering advice and support to offshore operations (Ops), onshore discipline & maintenance engineers, and production engineering teams. Develop and optimize maintenance strategy and program in accordance with business objectives and KPI, as well as providing short to long-term strategies and plans to continuously improve reliability and availability to ensure rotating equipment ops maintenance activities are executed in a safe, timely and cost-effective manner. Responsible as the Technical Authority for rotating equipment and turbomachinery ops and maintenance. Principle Accountabilities 1. HSSE a) Responsible for HSSE and Regulatory Compliance within their relevant discipline to provide leadership support to achieve goal zero for the organization. b) Ensures HSSE issues are given primary consideration in all activities undertaken within area of responsibility, based on the ALARP principle. c) Maintain technical assurance for SCE and Process Safety items concerning the discipline. d) Actively support and provide technical know-how in technical studies and failure investigations, Process and Instrument diagram reviews, Safety Integrity Level (SIL) assessments and HAZOP's etc. e) Ensure surveillance audits are conducted on SCE related PMs to ensure the assurance task as per the Performance Standard are met. f) Ensure verification tasks are completed as required by the SCE Performance Standard. 2. Accountability a) Be accountable as the Technical Authority, for all rotating equipment on the facilities and analyze and approve deviations from standards and practices, as required. b) Owns Rotating Equipment Engineering as Subject Matter Expert (SME) and act as the primary source of knowledge, techniques and expertise within the area to provide professional and technical insight for design, engineering, and complex troubleshooting activities. c) Develops and manages the delivery of technical excellence within Rotating Equipment Engineering, and liaises with engineers, leads and senior managers within maintenance and ops to develop and strengthen assurance processes to ensure uninterrupted plant operation. d) Provide recommendations, steer & direction to contractors, maintenance team and offshore personnel regarding mechanical rotating equipment O&M management to optimize equipment and associated machinery usage to the assets. e) Executable rotating equipment tasks and targets based on optimization of costs and available resources. f) Facilitate/lead/participate any incident or defect elimination investigation according to defined methodologies with the relevant teams. g) Accountable for review and update of performance standard sections related to rotating equipment. h) Strategize optimum engineering & maintenance methodologies for effective medium and long-term life and performance. i) Provide assurance for regulatory and industry compliance j) Provision of support that will be multidisciplinary in nature k) Responsible to assess condition of rotating equipment based on baseline developed earlier, and lessons learns from other plants/site through LFI l) Carries out Troubleshooting/Inspection to establish root causes of failure (RCFA) and prepare Corrective Maintenance plans/options m) Proposes and develops in cooperation with Maintenance/Reliability Group reliability and safety improvement projects for the asset n) Recommends design upgrades of rotating equipment and systems as required to improve Asset Integrity o) Establish FMEA and maintenance strategy and conduct continuous improvement program, facilitate Reliability Centred Maintenance (RCM) exercise, oversee continuous KPI monitoring and reporting methods p) Responsible to review and provide assurance scopes for turbomachinery and critical equipment on Long Term Service Agreements 3. Maintenance tasks a) Provide scope, review effectiveness, and approve turbomachinery and critical equipment contract on CSA/ LTSA in supporting Maintenance team as Contract Holder b) Review and approve and inspect parts repair at vendor workshop c) Review and approve and inspect equipment undergoing factory acceptance tests (FAT) for equipment d) Carry out assurance verifications to have effective PM and CM tasks implemented for all rotating equipment e) Review the Quality of Execution of maintenance activities such that Preventive Maintenance, Inspections and Corrective Maintenance job routines are executed in accordance with the agreed work management plans, based on best practices for the industry f) Develop optimum maintenance tasks for new rotating equipment on the facilities and ensure tasks are incorporated in CMMS g) Identify and plan potential defects elimination for defects relating to leakage, looseness, vibration, excessive heat, missing or broken parts and wrong materials h) Provide with fit-for-purpose maintenance strategies in line with the company's set-up and capabilities 4. Technical Advice and Support a) Provide guidance, support and technical advice to Ops group concerning rotating equipment and to act as Technical Authority, to review and approve deviations from standards and practices b) Technical support for the frontline crew is to be expected during all reasonable times 5. Management of Change a) Make & Review recommendations to organization concerning changes in work scope, job specifications, task descriptions, CMMS scheduling, task instruction relating to rotating equipment to ensure that these offshore equipment function safely and efficiently b) Provide support to other disciplines 6. Material Identification and SCM Assistance a) Assist in resolving material identification, procurement problems, managing warehousing management and improvements 7. Contract management / development a) Liaise with vendors as part of long-term service contracts, ensure contract terms & conditions are fulfilled b) Define technical working scope and evaluation procedure. Appraise bids and provide advice to line organization of best "all round" offers regarding materials, equipment, and procurement c) Manage key contracts Price Agreements and for contractor teams in order to ensure that offshore rotating equipment continues to function safely and efficiently, within budget and available resources 8. Bid Evaluation a) Provide Bid evaluation criteria to project team on selecting new equipment b) Assist in evaluating bids and provide advice to the organization of best "all round" offers regarding on-site and off-site repairs and materials procurement for rotating equipment 9. Budget Preparation/Cost Control a) Assist in the preparation of engineering & maintenance budgets and controlling costs within approved budget limits b) Contribute to cost savings/ avoidance effort with maintenance optimization exercise 10. Planning & RCAs a) Participate in major maintenance planning, including leading risk assessments and providing lead technical inputs for RCAs b) Multidisciplinary knowledge is expected at this job level and as such, its corresponding site support 11. Quality Assurance/Audits & Surveillance a) Participate in qualifying contractors and performing quality assurance surveys b) Strategize and perform audits as necessary. To ensure that the machines meet the required standards set per code or OEM or Industry best practices c) Provide and approve QAQC verifications of repair work for rotating equipment 12. Continuous Improvement: a) Work with maintenance & production teams to optimize the quality of O&M. Optimize and revamp obsolete practices that will remove redundant & overly conservative work b) Improve and update and make executable Maintenance and Operating philosophies and strategies c) Introduce best practices from other industries and operating units to improve current practices to strive for safer, better, and cheaper technologies and best practices 13. Requisitions and Work Orders a) Write work orders for appropriate maintenance tasks when necessary b) Suggest and approve material requisition proposal by maintenance team, aligning with ops and maintenance strategies to maintain optimized but adequate inventory levels c) Write and assist facilities engineering and project team to new project scope relating to rotating equipment d) On larger or critical jobs verify job preparations are done properly, and jobs are closed out effectively with lessons learned recorded Requirements 1. Minimum Bachelor's Degree in Mechanical Engineering Discipline 2. Minimum 10-15 years of working experience in Rotating Equipment engi
- Salary$42 - 44 per hour
Description:The Assistant Project Controls Specialist will support all aspects of project controls and reporting, including, project change management, cost control, progress measurement, schedule development and schedule control. Assist with developing, implementing and maintaining a cost management reporting data warehouse to produce valuable program controls reports and data. Perform project planning and scheduling tasks.Coordinate project schedules and assist with the development of scheduling reports.Coordinate project set-up in the Enterprise Planning & Controls software.Review data; maintain logs; and run reports in the Enterprise Planning & Controls software or other tools.Validate Work Breakdown Structure (WBS).Perform budget tracking against Purchase Orders or Subcontracts.Assist with upstream (prime contract) / downstream (PO & subcontract) change orders.Document changes to cost reports or forecasts.Assist with the development of a cash flow.Assist with the development of Level 1, Level 2, and Level 3 schedules.Complete schedules and diagrams in Microsoft Visio.Apply logic ties within the schedule.Document schedule progress.Perform resource loading of a schedule.Develop a earned value tracking document.Integrate data from one program to another.Assist quality checks and inspections on project controls deliverables.All other duties as assigned. Requirements: Bachelor's degree in Engineering, Construction Management or related field. Applicable experience may be substituted for the degree requirement.Experience with Oracle Primavera P6.Ability to work independently, think creatively and analytically, and make quick and sound decisions.Excellent written and verbal communication skills.Proficient with Microsoft Office.May be required to obtain an OSHA 10 hour safety certification.Willingness to accept long term field assignments