Operator Assistant I - Cementing
- Location: Perth
- Salary: AUD 210 per day
Offshore Cementing Operator and Supervisor
We are looking for Slickline operators to join one of our Oil & Gas client.Responsibilities: Driving the slickline unit to & from various job locationsServicing various down-hole tools and auxiliary equipmentAssist in safely carrying out rig in/rig out of all slickline equipmentAccurate data collectionCleaning & maintenance of slickline units, shop vehicles & shopAble to travel with slickline crewOther duties as assigned Requirements: Malaysian citizenMinimum 5 years working in Slickline Operators positions.Proficient in Malay and English language.
Role Summary / Purpose The client installed 300MW power plant in Biblis with 11 x LM2500Xpress Aero gas turbine.The plant will be operated by the customer from a remote location.The plant is a peaking plant and should have very high level of Availability, Reliability, and dependability.The Operations Manager will implement the operations and maintenance strategy of the plant. Ensure that the O&M operators are performing all their tasks as per GE recommendations. Operations Manager is the primary point of contact for all technical interface with the customer.He will work normal daytime working hours but will be on call if needed to support emergency situations in the plant as per the on-call procedure that would be developed on site Operations Manager will be responsible to: Manage the Operation and Maintenance team in Biblis site.Ensure that the team gets the required training to perform their duties properly.Setup the operation and maintenance plan for the plant.Manage the periodic start and shutdown of the plant to ensure 100% Reliability Qualifications/Requirements Bachelor’s Degree or Diploma in Engineering from an accredited university or college and/or equivalent knowledge / experience.5+ years’ experience in complex project management and / or operations and maintenance experience in the power generation industry and people leadership and influencing experience.5+ years’ experience in commissioning of Aero Gas turbines with M Vie control system.Must be fluent in German
Executive AssistantJob description Support the CEO of the company with his day-to-day responsibilities.Consolidate company’s performance for the reviewal of the CEO.Act as marketing agent for the company’s brand on behalf of the CEO. Responsible for minor Business Development with stakeholders, making the first call as an introduction for BD endeavours.Consolidate updates/reports from multiple departments in the company to communicate with the CEO and shareholders.Understanding the company’s financial and commercial information.Attend meetings alongside the CEO with important stakeholders. Take accurate and comprehensive notes at meetings.Help with daily time management. Plan travel, including flights, accommodation, and ground transportation. Requirements A bachelor’s in business, economics, commercial management, or any other related fields.Familiar with the Oil and Gas industry, especially its operations i.e. Upstream, Midstream, Downstream, Service providing. Has industry and market knowledge in Oil and Gas.5 – 10 years of working experience in related fields.Excellent command of the English language, both in writing and speaking.Good energy and charisma. Able to speak confidentlyGood communication, time management, organizational, multitasking skills. Attention to detail with numbers and statistics.
We are looking for 2 Malaysian Assistant Driller to support an upcoming Drilling Campaign in Malaysia. The candidate should possessed a valid IWCF/IADC with valid offshore certificates.
Key Responsibility & Accountability Provide general Office Admin and HR support / tasks, such as filing, setting up for meetings, reordering supplies, asset tagging and monitoring.Welcoming office guests and keeping the reception area tidy.Arranging travel and accommodations for employees.Sending and receiving mail and other correspondence.Ensure office facility, e.g meeting rooms and common areas are always clean.Performing other ad-hoc administrative works assigned by superior as and when required -- photocopying, data-entry and filing Job Requirement:Candidate must possess at least SPM/Diploma/Advanced/Higher/Graduate Diploma or equivalent.At least 3 year(s) of working experience in the related field is required for this position.Good interpersonal & communication skillsIndependent, highly organized with pro-active attitudePositive and willing to learn in a face paced environment
Spencer Ogden are currently recruiting Heavy Diesel Mechanics and Drill Fitters for a range of mining operators and OEM's across WA. If you're interested in learning more about the below opportunities, or what else SO are recruiting for across the mining sector, please reach out! Heavy Diesel Mechanic | Tier 1 OperatorRate: $70 - $80 p/h + super on all hoursRoster: 8:6, 7:7 Spencer-Ogden are currently recruiting Heavy Diesel Mechanics for a tier 1 operator to work on a nickel or iron site in WA. The business can offer great training, progression and offer exciting bonuses each year! 2 + years experience requiredProven experience on CAT, Komatsu and Hitachi and Liebherr is extremely desirableAustralian Recognised Trade CertificateAustralian Residents only.Opportunity to get your foot in the door with a Tier 1 Company Drill Fitter | Specialist Drilling CompanyRate: $80 - $90 p/h + super on all hoursRoster: 8:6, 2:1, 2:2 Spencer-Ogden are currently recruiting Drill Fitters for a Specialist Drilling Company to work on a range of sites in WA. The company offers fantastic rates once permanent! 5 + years experience requiredExperience on Sandvik and Epiroc DrillsVery small decrease from Casual rate once you transfer to Perm after 6 months.Australian Recognised Trade CertificateAustralian Residents only. Surface & Underground HD Fitter | Various OEM'sSalary: $60 p/h (Perth based) and up to $85p/h (site based) + super on all hoursRoster: 5:2, 4:3, 8:6, 7:7, 2:1, 2:2 Aswell as the above roles, Spencer Ogden are currently sourcing both Perth based, and Site based HD Fitters and Drill Fitters in both the surface and underground spaces. 1 + years' experience required.Opportunity to really gain a lot of experience required for furthering your career.Australian Recognised Trade CertificateAustralian Residents only. If you want to find out more about these opportunities, contact Padraig O'Donoghue on (08) 6245 9480 for more information.
DATA PROCESSORKaratha, Western Australia$950/day + Super$500 travel rate12 hour daysAprroximately 3 week durationFlights + Accompdation included 08 6245 firstname.lastname@example.orgI look forward to hearing from you soon!
Role Summary / Purpose The Client installed 300MW power plant in Biblis with 11 x LM2500Xpress Aero gas turbine.The plant will be operated by the customer from a remote location.The plant is a peaking plant and should have very high level of Availability, Reliability, and dependability.The Mechanical Maintenance Engineer will implement the maintenance strategy of the plant. Ensure that the Customer maintenance team and the O&M operators are performing all their tasks as per client recommendations. The Mechanical Maintenance Engineer point of contact for all Mechanical interface with the customer The Mechanical Maintenance Engineer will be responsible to: Read the O&M manuals of the plant’s equipment and build the maintenance program.Monitor the operational parameters of the operating units to evaluate units’ performance and maintenance requirements.Support the O&M contractor in planning Mechanical maintenance activities of gas turbines, BOP equipment, motor centers, and switchgears.Monitor the inventory of spare parts and consumables and support in ordering them.Lead the planned Mechanical maintenance activities and preform critical activities like generators inspections and Mechanical equipment inspections.Support the O&M team during the performance of unplanned Mechanical maintenance activities mainly when working on gas turbines accessories or generator. Qualifications/Requirements Diploma in Mechanical Engineering from an accredited college and/or equivalent knowledge experience.GE or equivalent manufacturer comprehensive training program in Mechanical servicing of gas turbines and generators and Balance of plant equipment.5+ years’ experience in Mechanical Inspection and overhauling of equipment and GE Aero gas turbines.
Post: Cyber Security Analyst (CSA)Reports to: IT ManagerResponsible for: No direct reportsLocation: IUK London office + working remotely as required, with travel as required for performance of the roleKey Relationships/Interfaces:External entities: Working with Ofgem to ensure compliance and National Cyber Security Centre (NCSC). Sit on the E3CC steering group for Cyber in the energy industry. Sit on the Cyber Advisory Group (CAG) for shareholder updates.Internal entities: Working closely with the Operations teams in IBT / IZT. Working with Engineering team on new projects.Financial Accountability:Not a budget holderPurpose:The Cyber Analyst (CA), will work closely with the IT Manager and the Engineering Department. The role will be responsible for supporting the IT Manager in implementing Cyber security guidelines laid out by Ofgem as part of the NCSC's CAF framework. This will be done via a roadmap of improvements to ensure Interconnector are compliant with current legislation for Operators of Essential Services (OES).Working with third parties to ensure my clients OT environment is optimized and protected against the threat of Cyber events, looking at evolving threats and ways to mitigate or eradicate before they cause disruption to the core business.Working with the Engineering and Operations teams on new projects looking at these from an impact to cyber security and making recommendations to ensure new and evolving technologies meet the secure standards required.Key Responsibilities/Accountabilities:1. Work to deliver the Cyber roadmap. Help to devise / evolve the cyber roadmap alongside the IT Manager2. Act as the Deputy NIS Responsible Officer (DNRO). Working as one of the two named individuals with Interconnector with Ofgem / NCSC to implement any cyber policy or procedures.3. Act as deputy for the Cyber Advisory Group - a group that meets quarterly to update Shareholders on work undertaken and any actions identified / outstanding4. Work with Fluxys Cyber Teams for alignment and cross over from IT into OT5. Act as a Technical resource for new IT / OT projects to ensure security first mentality from a Cyber perspective.6. Prepare material for presentation at internal and external meetings (CAG, E3CC, Ofgem, internal Departmental meetings)7. Work with Third parties brought in to help deliver a more robust delivery mechanism of cyber - this includes third party outsourced Security Operations Centre (SOC)8. Maintain and develop effective working relationships with colleagues across the Group to leverage knowledge sharing, call upon a wider skills pool and participate in Group wide cyber activities9. Develop relationships and maintain contact with industry counterparts to gain understanding of developing industry and market trend
As an I&C engineer, work with a team of I&C engineers and designers, and other disciplines, to perform detail engineering, including front-end planning work, develop I&C quantities and cost estimation, conduct conceptual studies, perform technical quality reviews, attend Factory Acceptance Testing (FAT), and support construction & commissioning activities . Work under a direct supervision of an I&C lead or work independently on smaller projects or standalone activities. Knowledge of instrumentation and control systems (PLC/DCS) is required.Prepare instruments and control system specifications, instrument inquiry/bid packages, technical bid summaries, and purchase recommendations.Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.Participate in the development of P&ID's and equipment/construction subcontract package specifications.Develop instrument index, I/O list, cause & effect and logic diagrams, and control narratives.Work with the India I&C team and other disciplines to produce I&C engineering and design deliverables.Work with clients and vendors for information required to complete engineering design deliverables on schedule and building long working relationship.Interface and support construction personnel directly from the office and support construction and pre-commissioning activities in the field, as required.Work with SmartPlant Instrumentation (SPI) and other smart tools to produce engineering and design deliverables.Able to support construction and startup & commission activities in the field, as required Requirements: Bachelor's degree in Electrical Engineering, Mechanical Engineering or Chemical Engineering from accredited program required.Engineer-In-Training (EIT) Certification recommended.3 years related experience. Completion of master's degree in related field may be substituted for one year of experience. Strong analytical and problem-solving skills.Attention to detail.Ability to clearly communicate both verbal and written technical information.Must be proficient in the use of computer software (i.e., MS-Word, Excel, PowerPoint, Access).Valid driver's license required. Must be willing and able to obtain, or currently hold a valid Transportation Worker Identification Credential (TWIC).
Key Responsibility & Accountability Assist Senior Accountant entity-level financial management, including the monthly, quarterly, and annual financial close and financial report.Perform periodic recoverability assessment on investments in subsidiaries and intercompany balances.Assist in monthly tracking of expenses against the business plan.AP invoice processing, exception resolutions, and vendor reconciliation processes and proactively manages day to day issues related to vendor accounts.Maintain vendor statements and communicate with vendors when necessary Maintain accurate and current documentation and filesAssist in transfer pricing compliance for SKEO KL Branch.Assist in compliance of application system controls procedures.Proactively explores solutions for process improvement including to the Finance SOP, process flowcharts and automation of systems.Other ad-hoc duties as prescribed by Senior Accountant to assist in achieving Department's objectives.
To lead the commissioning of the GE Plant Controls System (Mark VIe) for Combined Cycle Power Plants (CCPP) and ensure planning, preparation and execution of the commissioning, operation, trial run and acceptance. Essential Responsibilities Prepare and execute the commissioning, trial run, acceptance testing, and inspection/measurements works defined by the Commissioning ManagerParticipate in site meetings by arrangement with the Commissioning ManagerUtilize all available tools and aids to achieve the goals of his/her assignment and, as well, to strive for continuous product improvements and cost reductionPrepare, manage, perform, coordinate, and monitor the commissioning of the specified systems in a safe and timely mannerPerform commissioning as per specifications, engineering documents considering the safety instructions, environmental protection measures and local regulationsOrganize and supervise the safe operation of the plant (site rules, safety regulations, shift plan, shift log, etc.) from system turnover from Installation until COD by arrangement with the Commissioning ManagerFacilitate the turnover of systems from Installation to commissioning and from commissioning to the customer in accordance with current procedure/work instruction by arrangement with the Commissioning ManagerWork off the open item lists of systems under his/her responsibility by arrangement with the Commissioning Manager Qualifications/Requirements More than 10 years of experience in commissioning and strong knowledge of the GE Mark VIe Controls System and process of Combined Cycle Power Plants (CCPP) including strong knowledge of PID loop tuning.Strong Knowledge of communication protocols: Modbus, Foundation Fieldbus and ProfibusStrong analytic and problem-solving capability.Willing to travel worldwide for long term assignmentsFluent in spoken and written English