Process Safety Engineer
- Location: Port Arthur
- Salary: Rate is negotiable.
Role & Responsibilities:
To lead the commissioning of the GE Plant Controls System (Mark VIe) for Combined Cycle Power Plants (CCPP) and ensure planning, preparation and execution of the commissioning, operation, trial run and acceptance. Essential Responsibilities Prepare and execute the commissioning, trial run, acceptance testing, and inspection/measurements works defined by the Commissioning ManagerParticipate in site meetings by arrangement with the Commissioning ManagerUtilize all available tools and aids to achieve the goals of his/her assignment and, as well, to strive for continuous product improvements and cost reductionPrepare, manage, perform, coordinate, and monitor the commissioning of the specified systems in a safe and timely mannerPerform commissioning as per specifications, engineering documents considering the safety instructions, environmental protection measures and local regulationsOrganize and supervise the safe operation of the plant (site rules, safety regulations, shift plan, shift log, etc.) from system turnover from Installation until COD by arrangement with the Commissioning ManagerFacilitate the turnover of systems from Installation to commissioning and from commissioning to the customer in accordance with current procedure/work instruction by arrangement with the Commissioning ManagerWork off the open item lists of systems under his/her responsibility by arrangement with the Commissioning Manager Qualifications/Requirements More than 10 years of experience in commissioning and strong knowledge of the GE Mark VIe Controls System and process of Combined Cycle Power Plants (CCPP) including strong knowledge of PID loop tuning.Strong Knowledge of communication protocols: Modbus, Foundation Fieldbus and ProfibusStrong analytic and problem-solving capability.Willing to travel worldwide for long term assignmentsFluent in spoken and written English
Key ResponsibilitiesThe key responsibilities include the following: Planning of outages on the main Combined Cycle Gas Turbine plant and Open Cycle Gas Turbine plant and other major items of plant.Development of contingency plans associated with the aboveReview of contracts, programmes, project and commercial documentation associated with outagesProgress and reporting on all planned and unplanned outagesEnsuring plans meet safety, environmental, technical, and commercial targetsCo-ordination of day-to-day maintenance planning activities.Managing site specific projects that have defined time or functional start and end criteria. These may include CAPEX projects, plant investigations, technical and commercial project assignments, audits etc.Manage and develop site based computerised maintenance management systems to suit business and plant needsDevelop and test site Business Continuity PlansCoordinate the preparation of monthly reports, business reviews and associated follow up actions.Develop procedures and plans in the above areas to support the stations ISO quality standards Knowledge, Skills and ExperienceEssential Experience in a power plant or similar process industry in a commercial environment is considered essential.It is expected that the incumbent would have good interpersonal skill and have the ability to manage and lead projects, coordinate activities, chair meetings, and manage unplanned changes.The incumbent would be expected to prepare reports to suit recipients at different levels of the organisation and make presentations as required. Desirable Working experience in the use, development and management of planning software and computerised maintenance management systems would be an advantage. QualificationsIt is desirable that the incumbent has 3rd level qualification in engineering or a related technical/science based subject.
One of Spencer Ogden's LNG clients is seeking a Process/Project Engineer to join them on a one year contract with the possibility of extension. The role will require candidates to be local or be willing to relocate to the Houston area.Minimum Qualifications A Bachelor's Degree in chemical engineering.8+ years working on EPC projects.US, Mexican or Canadian citizenship or a green card Responsibilities Experience reviewing regulators FERC and PHMSA documents and questiosns or experience on LNG projects.Participate in the review of P&ID's, PFD's and other design drawings.Participate in Process Hazard Analysis, HAZOPS or other formal hazard assessment groups.Assists in developing responses to regulatory agencies FERC and PHMSAProvide company supervision to the safe work of the EPC contractor and subcontractors. Details 1 year contract with the possibility of extensionRate: NegotiableLocation: Houston
As an Offshore Foundation Structural Assessment Senior Engineer F/M you will be involved in delivering multi-level ongoing projects in the offshore wind whilst looking at the wider renewable energy business in general, contributing and developing broader technical solutions for business.You'll be part of an enthusiastic and committed team of Engineers and Technicians to deliver high-quality output on projects. Client care and repeat business are crucial to success. This means you enjoy developing and nurturing relationships with clients.You will have a good understanding of the technical engineering requirements of offshore wind turbine structures. As an Offshore foundation structural assessment senior engineer, you will be Performing structural calculations mainly using the finite element calculation method (FEA) to include: Analysis of Structural ModelsMonitoring calculations and detailed drawingsSelection of load cases (environmental conditions, a turbine in production/shutdown, etc.)Post-processing of extreme loads and fatigueAnalysis of the results and recommendations on the designData flow managementEnsuring technical compliance with the relevant regulations and client specificationsCompletion and delivery of high-quality technical reports. and you will carry out the dimensioning of structures: In the pre-design, design, basic, and detailed engineering phases (typically offshore jacket/monopile wind turbine foundation).Analysis of structural designs and gradually develop expertise in a wide range of offshore structures including static & dynamic analysis, fatigue analysis, impact analysis, fracture mechanics, Finite Element Analysis, wave dynamics, seismic design, engineering materials, etc. The role is based in Nantes, France, and the incumbent will have the right to work and reside in France.In this hybrid role, you will have a defined work location that includes remote work from home, in the office, and offshore/on-site as agreed with your manager.Flexibility to working hours and willing travel locally and internationally may be required occasionally.What we are looking forWe are looking for a determined, results, and client-oriented professional with a supportive and global mindset, and excellent interpersonal skills. The successful candidate should be passionate about innovation, and progress and enjoys working in a dynamic and multicultural environment both independently and as part of a team. In addition, you: Hold a Master's degree (or equivalent):structural mechanics and/or solid mechanics.Have at least 3 years of experience in the offshore field (Wind or Oil & Gas) in the dimensioning of offshore foundation structures, mainly of the jacket or monopile type.Will have Knowledge of mechanical characteristics of metal/concrete/composite materials (RDM).Have an in-depth understanding of at least 1 of the following: ANSYS / SACS / ABAQUS / SESAM.Knowledge and/or practice of standards such as DNV-GL, IEC, API, AISC, and Eurocodes.Are fully proficient in English, and French is an advantage.Practice in code checking, yielding, buckling, and fatigue, in ULS, FLS, and ALS conditions could be an additional advantage.
Qualification: Must have experience associated with engineering design, onshore fabrication, offshore installation, brownfield construction and hook-up and commissioning of offshore structures. At leasr 5-8 years of expierienceHas used Software skills such as SACS, Staadpro or SESAMHas worked on FPSO projects prior.
Role Summary / Purpose The Client installed 300MW power plant in Biblis with 11 x LM2500Xpress Aero gas turbine.The plant will be operated by the customer from a remote location.The plant is a peaking plant and should have very high level of Availability, Reliability, and dependability.The Mechanical Maintenance Engineer will implement the maintenance strategy of the plant. Ensure that the Customer maintenance team and the O&M operators are performing all their tasks as per client recommendations. The Mechanical Maintenance Engineer point of contact for all Mechanical interface with the customer The Mechanical Maintenance Engineer will be responsible to: Read the O&M manuals of the plant’s equipment and build the maintenance program.Monitor the operational parameters of the operating units to evaluate units’ performance and maintenance requirements.Support the O&M contractor in planning Mechanical maintenance activities of gas turbines, BOP equipment, motor centers, and switchgears.Monitor the inventory of spare parts and consumables and support in ordering them.Lead the planned Mechanical maintenance activities and preform critical activities like generators inspections and Mechanical equipment inspections.Support the O&M team during the performance of unplanned Mechanical maintenance activities mainly when working on gas turbines accessories or generator. Qualifications/Requirements Diploma in Mechanical Engineering from an accredited college and/or equivalent knowledge experience.GE or equivalent manufacturer comprehensive training program in Mechanical servicing of gas turbines and generators and Balance of plant equipment.5+ years’ experience in Mechanical Inspection and overhauling of equipment and GE Aero gas turbines.
Asset Integrity Engineer$1000/day + Super8 hour days Monday - Friday - Perth BasedWorking for an Oil & Gas operatorInitial 12 Month ContractFebruary StartMechanical or Corrosion Materials Engineering backgroundRBIFFSNDTCSWIPNACE
Directional Drilling Engineer (Consultant)Offshore Malaysia Mubadala, HESSMinimum 2 years offshore experienceMinimum 6 month project Please email me your CV at firstname.lastname@example.org
As an I&C engineer, work with a team of I&C engineers and designers, and other disciplines, to perform detail engineering, including front-end planning work, develop I&C quantities and cost estimation, conduct conceptual studies, perform technical quality reviews, attend Factory Acceptance Testing (FAT), and support construction & commissioning activities . Work under a direct supervision of an I&C lead or work independently on smaller projects or standalone activities. Knowledge of instrumentation and control systems (PLC/DCS) is required.Prepare instruments and control system specifications, instrument inquiry/bid packages, technical bid summaries, and purchase recommendations.Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.Participate in the development of P&ID's and equipment/construction subcontract package specifications.Develop instrument index, I/O list, cause & effect and logic diagrams, and control narratives.Work with the India I&C team and other disciplines to produce I&C engineering and design deliverables.Work with clients and vendors for information required to complete engineering design deliverables on schedule and building long working relationship.Interface and support construction personnel directly from the office and support construction and pre-commissioning activities in the field, as required.Work with SmartPlant Instrumentation (SPI) and other smart tools to produce engineering and design deliverables.Able to support construction and startup & commission activities in the field, as required Requirements: Bachelor's degree in Electrical Engineering, Mechanical Engineering or Chemical Engineering from accredited program required.Engineer-In-Training (EIT) Certification recommended.3 years related experience. Completion of master's degree in related field may be substituted for one year of experience. Strong analytical and problem-solving skills.Attention to detail.Ability to clearly communicate both verbal and written technical information.Must be proficient in the use of computer software (i.e., MS-Word, Excel, PowerPoint, Access).Valid driver's license required. Must be willing and able to obtain, or currently hold a valid Transportation Worker Identification Credential (TWIC).
The roleTo supervise and train staff. Prepare and update Electrical deliverables. The successful candidate will have experience in green field and brown field engineering of offshore O&G facilities and renewables. Capable of contributing to many areas as part of a small project team. Capable of originating documentation and working with minimum supervision and external input.Scope of Responsibilities: To ensure the quality of work undertaken by themselves and others is commensurate with the goal of the activity considering the constraints of time and budget.To support with competency the Engineering Design of Electrical Systems for Offshore and Onshore Installations, from Concept phase to Detail Design, actively participating in the production of Project Deliverables and Discipline Meetings.Conduct Power System studies including calculation files.Design of substations.Coordinate engineering activities with other interested parties.Represent ODE with Clients on technical matters.Prepare and update technical specifications.Prepare and issue reports on electrical design.Prepare and issue Enquiry Documentation.Technical Bid analysis of electrical equipment and materials.Attend Factory Acceptance Tests (FATs).Assist with the preparation of budget estimates (materials and manhours).Review Project Documents produced by third parties.Direct and lead other junior engineers and designers as required. Qualifications/ Experience: Candidates must hold a minimum Bachelor's degree (or equivalent) in Electrical Engineering combined with 5+ years of professional experience in design and engineering.Candidate must be registered with an Engineering Council or equivalent and preferably a Chartered Engineer (or working towards) is considered advantageous.Proven success in delivering studies and preparing clear, concise reports against time, cost, and quality objectives.Experience in feasibility/concept selection studies and FEED projects. Competencies & Soft Skills:Electrical engineer, with experience as an electrical engineer in the oil and gas industry for offshore projects. Candidate should have: ETAP Software experienceCommercial awarenessDetail conscientiousStrong work ethic & leadership skillsExcellent written and verbal communication skillsTeam player, self-starter.Strong IT literacyFlexible to travel in UK and OverseasGood report and procedure writing skills
Senior Mechanical EngineerPiping Design ExperienceOil & Gas Experience Pipe Stress AnalysisKnowledge and Experience with Gas Pipelines, Pressure Vessel and Tanks8 years + experiencePerth or Adelaide based - Interstate candidates will be consideredOffice based role8 hours daysMonday - Friday$940/day + Super. Based on an initial 12 month contract - Ongoing.email@example.com
Pipeline Integrity Engineer Oil & Gas Experience Support/manage pipeline integrity of our client's Australian LNG pipelines.Maintain and track integrity critical maintenance tasks, project manage and execute inline inspection and riser inspection work scopes.5 years + experiencePerth or Adelaide based - Interstate candidates will be consideredOffice based role8 hours daysMonday - Friday$940/day + Super. Based on an initial 12 month contract - Ongoing.firstname.lastname@example.org