Project/Senior Geologist - Redlands
- Location: Redlands
- Salary: $80k - 130k per year
We are actively seeking Project and Senior Level Geologists and Engineering Geologists for our Southern California offices.
We are currently seeking an Environmental Scientist, Geologist, or Engineer to manage project assignments in our Reno, NV office. This position has the ability to work from both the office and home. What you will do: Manage and communicate with clients and supervisorsManage budgets and schedulesPhase I & Phase II site assessments, industrial hygiene assessments, and sampling of soil, groundwater, or air. What you will possess: BS degree in Geology, Engineering, or related Environmental Science field1-10 years of experience 40-hour OSHA HAZWOPER training preferred but not requiredExcellent verbal and written communication skillsAbility to write technical reports and proposalsAbility to perform field work requiring physical exertionCapable of multitaskingGood driving record acceptable to company's insurer
Seeking a California Professional Engineer with 7-15 years' experience to join a team of environmental site assessment and remediation specialists based in Tustin, California. Candidates must have experience working on projects in California. POSITION DESCRIPTION: Technical Analysis of Project Data and Reporting: Preparing, writing and reviewing?technical assessments and remediation status reports Contaminant fate and transport evaluation Groundwater flow and hydrogeological data evaluation Chemical data interpretation Remediation progress evaluations Supporting environmental risk assessments and developing client-focused?management strategies Project Coordination and Preparation: Working with Project Managers to manage, plan, coordinate, and implement environmental site assessment and remediation activities. Developing Workplans and Budgets Planning and Overseeing Fieldwork: Site assessment work with various drilling and sampling techniques, and installation of monitoring and remediation wells, remediation pilot testing, permitting. CANDIDATE REQUIREMENTS: The ideal candidate will possess the following: Demonstrated environmental assessment and remediation experience in California A Bachelor's degree from an accredited university in earth science (geology or hydrogeology) or civil/environmental engineering; Master's degree is considered a plus Licensure in California as a Professional Geologist or Registered Civil Engineer considered a plus Experience as the primary author on investigation reports and technical documents Experience with various environmental drilling and sampling techniques Experience with various remediation techniques Experience working with supporting staff in the field and office for the development and completion of field and reporting activities. Experience budgeting projects and managing billing Strong analytical skills Interpersonal skills that enable him/her to work independently and as a team player/leader Operational knowledge of computer databases and MS, Excel, MS Word, MS Outlook, MS Planner OSHA 40-hour HAZWOPER Certification Compensation will be commensurate with the candidate's experience $90-120k along with a competitive benefits package that includes: several PPO and HMO health care options, dental and vision insurance, life & disability insurance, participation in profit sharing, 401(k), Section 125, HSA & FSA plans. OTHER REQUIREMENTS: The physical ability to perform field work including lifting up to 50 lbs. (Pre-offer physical is required.) A vehicle and good driving record are required (mileage is reimbursed).
Our company is a consulting engineering, planning, and construction compliance firm located in Seattle, Tacoma, and Bellingham, Washington. We are actively looking to hire a full-time Project Engineer to join our engineering group in one of these three office locations. While collaboration with staff from all offices is expected, we can prioritize your preferred location.We take pride in our status as an employee-owned and managed consulting firm. We are dedicated to the growth and retention of our employees within a positive, collaborative, and challenging work environment. Striving for a healthy work-life balance for all staff members is a fundamental aspect of our commitment.The role of the Senior Project Engineer/Project Manager involves significant responsibilities, including: Playing a key role in the company's growth by identifying and developing new clients and projects.Demonstrating strong project management skills, including developing scopes of work, budgets, and schedules during project planning. It also includes delivering quality projects on time and within budget.Independently coordinating staffing and workload throughout the entire project development process, ensuring timely completion of deliverables.Tracking financial aspects of projects, and coordinating and adjusting work efforts with the team to ensure completion.Demonstrating experience in municipal engineering, particularly in areas such as sanitary sewer, storm sewer, water system, and site civil design (grading, pavement, sidewalk, etc.). To be considered for this position, the following qualifications are required: Bachelor of Science degree in Civil, Environmental, Chemical, or Mechanical Engineering.Licensed Professional Engineer (PE), with the requirement of obtaining a State of Washington PE license within 6 months of hire.Minimum of 12 years of demonstrated success working on multi-disciplinary engineering projects.Strong background in technical leadership, mentoring, and project management.Excellent verbal and written communication skills.A positive attitude and commitment to being an active participant in our employee-owned culture.Proficiency in MS Office (Excel, Word, PowerPoint) and MS Project.Demonstrated success in working on multi-disciplinary engineering projects. The following qualifications would also be beneficial: Working knowledge of AutoCAD, GIS, and/or Revit (BIM) design software products.Master's degree in engineering.Project management training, PMP certification, or similar technical design leadership.Experience with wastewater process modeling software (BioWin).Experience with hydraulic modeling products (Innovyze, Bentley, and/or Visual Hydraulics).Involvement in professional societies and established clientele and professional relationships. We offer a generous total compensation package, including 100% company-paid employee health, life, and disability insurance. We also provide flexible schedules, reimbursement for professional registrations and renewals, paid memberships in professional organizations, and paid time off (sick, vacation, holidays). Additionally, we have a 401(k) retirement plan with company matching contributions and ownership opportunities.We are an equal opportunity employer committed to maintaining a workplace free from discrimination. We do not discriminate in employment based on age, race, creed, color, religion, sex, sexual orientation, national origin, disability, marital status, or any other basis prohibited by federal, state, or local law.
Senior Project Manager - Must be a specialist in delivering Turnkey HV Substation projects - 12 Month contract (3-4 years extendable) - Northeast based 2 days a week and WFH option- Occassional client/site visits Please email Alex.Bryant@spencer-ogden.com for the full job description...
Spencer Ogden is partnered with a global multi-energy provider in Houston seeking a Senior Project Engineer to join their Project Management team and their busy pipeline of utility scale solar projects! The Role: Responsible for the engineering interface within development, transmission, engineering, operations, and project/construction managementPlan and manage all technical aspects and decisions associated with design, technical adequacy, permitting, schedule, budgets and construction and start up support of assigned Wind, Solar, and Energy Storage projects.Define and manage the scope, design criteria, priority, schedule, quality and budget for all assigned engineering tasks required in support of development and project executionDefine and establish project technical requirements for EPC RFP’s scope of work and associated bid reviews, evaluations and recommendations consistent with project budget and delivery milestones.Analysis of engineering alternatives to ensure most cost-effective approach is followed while maintaining compliance with technical adequacy and safety standards.The position has a competitive base salary and bonus as well as hybrid work schedule with three days in the Houston office. Qualifications: Bachelors Electrical, or Civil Engineering.7+ years of experience within Renewable Energy Power Generation through different phases of project lifecycle.Knowledge of CAD Design & Electrical Systems.History of working with an EPCPrevious Utility Scale Renewable experiencePE License in TX is a plus
This established consulting firm specializes in engineering, planning, building codes, and construction compliance. With office locations in Seattle, Tacoma, and Bellingham, Washington, we have built a strong reputation in the industry. As a growing firm, we have a significant backlog of municipal consulting services contracts in the Northwest, primarily serving clients in Western Washington. We take pride in being an employee-owned and managed company that fosters employee development and retention within a positive, collaborative, and challenging work environment. We are committed to ensuring a healthy work-life balance for all staff members.Expertise: Over the years, we has provided comprehensive assistance to a diverse range of clients in the Puget Sound region for their wastewater treatment needs. Our services include planning, evaluations, pilot testing, design, construction support, optimization, permitting, and on-call assistance. Our team possesses the expertise and resources to serve larger municipalities while remaining adaptable and efficient to also cater to the needs of smaller municipalities and select industrial clients. We have been at the forefront of partnering with energy services companies (ESCOs) in the area, collaborating on projects aimed at reducing energy consumption by wastewater utilities. We constantly engage with and evaluate new technologies to deliver innovative solutions, such as recent projects involving peracetic acid for disinfection, mobile organic biofilm for activated sludge processes, and gasification and pyrolysis for biosolids processing. With the ongoing Puget Sound Nutrient Reduction Project, there are abundant opportunities for us to assist new and existing clients in meeting pending nitrogen limits.Position: Senior Project Engineer/Project Manager The Senior Project Engineer/Project Manager plays a pivotal role in the continued growth of our company. Key responsibilities include maintaining client relationships, managing projects for existing clients, and actively pursuing new client opportunities. The ideal candidate will have extensive experience in municipal engineering, specifically focused on wastewater treatment process design, with a comprehensive understanding of related electrical, structural, instrumentation, and civil design aspects. While the primary responsibility will be executing wastewater treatment projects, the candidate should also be flexible in working on other civil engineering projects based on workload and project needs. Strong project management skills are essential, including the ability to develop scopes of work, budgets, and schedules during project planning, and ensuring the delivery of high-quality projects within designated timelines and budgets. The Senior Project Engineer/Project Manager will independently coordinate staffing and workload throughout the entire project development process and ensure the timely completion of all deliverables.Required Qualifications: Bachelor of Science in Civil, Environmental, Chemical, or Mechanical EngineeringLicensed Professional Engineer (PE) with a State of Washington PE license required within 6 months of hire10+ years of demonstrated success working on multi-disciplinary engineering projectsProven experience in wastewater treatment projects, including design, process evaluations, planning, and/or testingStrong background in technical leadership, mentoring, and project managementExcellent verbal and written communication skillsPositive attitude and commitment to actively participating in our employee-owned cultureProficiency in MS Office (Excel, Word, PowerPoint) and MS Project Additional Qualifications: The following qualifications would be advantageous for the role: Working knowledge of AutoCAD and/or Revit (BIM) design software productsExperience with wastewater process modeling software (e.g., BioWin)Master's DegreeInvolvement in professional societiesEstablished clientele and professional relationshipsProject management training, PMP certification, or similar technical design leadership We Offer: Generous total compensation packageMonthly commute/home office stipend for transportation, parking, and home office expenses 100% company-paid employee medical, dental, vision, life, and disability insurance60% company-paid dependent health and vision insurance50% company-paid dependent dental insuranceHealth Savings Account and Flexible Spending Account options for tax savingsFlexible schedulesReimbursement for professional registrations/renewals and approved training/conferencesPaid memberships in professional organizationsEmployee referral bonus programCareer guide mentorship programPaid time off (sick, vacation, holidays, and volunteer day)401(k) retirement plan with company matching contributionOwnership opportunity We are an equal opportunity employer committed to the principles of non-discrimination in the workplace. We do not discriminate in employment on the basis of age, race, creed, color, religion, sex, sexual orientation, national origin, disability, marital status, or any other basis prohibited by federal, state, or local law.
This position will be under the general direction of a Senior Project Manager, on the Project Development Team. The Project Manager position is responsible for the management, or the assistance of managing, all phases of project planning to ensure all project success factors are met, including but not limited to scope, schedule, cost, quality, environmental, safety, communications, security, and integration. This position will be assigned to multiple transmission projects. In aggregate, these projects are typically less than $10M with a Low to Moderate level of complexity impacting only the facility or department level within the Company. The PM serves as the unifying agent providing leadership, management, direction, coordination, and control of the overall project in accordance with the established policies, procedures, systems, and requirements of The Company.This position is typically retained to manage multiple “White” or “Green I” projects per the Project Management Center of Excellence Project Profile Matrix.Required Qualifications: Minimum of 5 years of project management experience. Graduation from a two-year college or university. Working knowledge of project management principles. Working Knowledge to Proficiency in Project Management, Decision Making, Critical Thinking, and Problem Solving; Project related work experience; Risk Management; Project Leadership; Proven Collaborative Team Member.Preferred Qualifications: Graduation from a four-year college or university. Utility Technical Certifications/Training; PMI (PMP or CAPM) Certification; CMII certificates; Professional Engineer License. Working knowledge to proficiency in project related Scheduling/ Cost Controls. Experience in utility industry. Knowledge in construction management. The Project Manager may have relationships with individuals in various organizations ranging from individual contributors to Senior Department Leadership (i.e. individual contributors up to executive management).
Produce detailed drawings, plan sets, and volume calculations for various disciplines, including landfills.Maintain constant communication with Project Managers and Senior Engineers regarding project work and designs.Listen attentively and understand inquiries, providing optimal solutions for implementation.Assist in design tasks for all production assignments, conducting research to solve design problems and collaborating with other resources to streamline processes.Develop design concepts and generate project design deliverables based on sketches, written and/or verbal instructions.Exercise judgment and make decisions regarding deliverables and interpretation of input.Ensure that design concepts and deliverables are comprehensive, meeting company or client requirements, applicable codes, and standards.Revise project drawings based on feedback from the Project Manager and/or Engineer.Establish and manage electronic document file structure and naming conventions in accordance with company or client standards.Collaborate closely with Project Managers and Engineers to establish and manage contract and construction drawings.Create and modify base drawings for use in various documents.Work efficiently as a productive team member and proficient AutoCAD user, handling a typical set of project documents from start to finish with professional quality output that adheres to company and client standards.Manage multiple projects simultaneously in different locations and states.Adhere to CAD standards.Conduct a final review of drawings to ensure completeness, clarity, and accuracy.Prepare technical reports, such as operating plans, CQA reports, and permit applications.Analyze technical data using tools like Excel.Apply logic and creativity in resolving design issues.Effectively communicate with colleagues and superiors.Utilize computer-aided design (AutoCAD) software to design landfill projects.Perform construction observation and document findings.
Key ResponsibilitiesThe key responsibilities include the following: Planning of outages on the main Combined Cycle Gas Turbine plant and Open Cycle Gas Turbine plant and other major items of plant.Development of contingency plans associated with the aboveReview of contracts, programmes, project and commercial documentation associated with outagesProgress and reporting on all planned and unplanned outagesEnsuring plans meet safety, environmental, technical, and commercial targetsCo-ordination of day-to-day maintenance planning activities.Managing site specific projects that have defined time or functional start and end criteria. These may include CAPEX projects, plant investigations, technical and commercial project assignments, audits etc.Manage and develop site based computerised maintenance management systems to suit business and plant needsDevelop and test site Business Continuity PlansCoordinate the preparation of monthly reports, business reviews and associated follow up actions.Develop procedures and plans in the above areas to support the stations ISO quality standards Knowledge, Skills and ExperienceEssential Experience in a power plant or similar process industry in a commercial environment is considered essential.It is expected that the incumbent would have good interpersonal skill and have the ability to manage and lead projects, coordinate activities, chair meetings, and manage unplanned changes.The incumbent would be expected to prepare reports to suit recipients at different levels of the organisation and make presentations as required. Desirable Working experience in the use, development and management of planning software and computerised maintenance management systems would be an advantage. QualificationsIt is desirable that the incumbent has 3rd level qualification in engineering or a related technical/science based subject.
This hands-on individual will serve a key function in helping to manage and mentor a team of engineers, lead design efforts, and develop and maintain clients for the firm. In this role, you will have the opportunity to both lead and support design and permitting efforts for a variety of land development projects, including commercial centers, residential developments, warehouse distribution centers, and mixed-use projects for both public and private clients. Job Responsibilities Work closely with office leadership to develop growth plans and ensure staff utilization;Possess an entrepreneurial demeanor and participate in Business Development activities by developing new clients for the firm and maintaining relationships with existing clients;Demonstrate experience in all aspects of land development engineering including the integration of geotechnical and environmental engineering;Knowledge of local, County and State land use entitlement processes and regulations. Familiarity with NY state and NYC land use processes a plus;Site/civil experience on a variety of project sites including the ability to design and oversee site layout, grading, drainage, infrastructure, erosion and sediment control, etc. from concept through completion;Expertise in stormwater management design, LID, hydrologic/hydraulic analysis and design and SWPPP preparation;Planning board and public testimony experience strongly preferred;Ability to design and oversee design including layout, grading, drainage, infrastructure, erosion and sediment control, etc. from concept through completion; andPosition requires work Monday through Friday with occasional evenings and weekends; andPerform other duties as requested. Qualifications Bachelor's degree in Civil Engineering, Master's degree a plus;Possess valid New York Professional Engineer licensure (can be another state if reciprocity pursued);10+ years' experience in related site/civil land development engineering;Experience in report and proposal writing;Strong client development and client management abilities;Proficiency of AutoCAD or Civil 3D (preferred) with the ability to design site layouts from concept through completion;Active participation in professional organizations;Ability to effectively work independently and in a team environment, and to mentor staff engineers;Excellent written and verbal communication skills;
The Project Construction Coordinator will be responsible for supporting the pre-planning and execution for the client's renewables and power portfolio. In addition to project-supporting tasks, the position will support continuous improvement initiatives such as documenting and improving processes and procedures, market industry knowledge. Document Control:- Manage documents control and workflow monitoring during the EPC RFP, EPC contracting, and during the construction, testing and commission of the project.- Support the set-up of the internal and external project folders.- Support the design of the workflow for the different processes during the project execution.- Maintain a library of standard templates and guiding principles for close-out documentations.- Assist in scanning, organizing, indexing, archiving essential project documentation.- Fulfill document retrieval requests.- Receive and process RFIs, NCNs, Submittals and Transmittals.- Maintain tracking log for RFIs, NCNs, Submittals and Transmittals.- Check compliance and quality of documents against contract requirements.- Liaise with Client/Contractor/Subcontractor.- Report on process of documents as needed.- Administrate the document control system/platform for the project.- Manage the process of Job Books creation and compliance, in accordance with contracts requirements.- Review and comment on QA/QC documents required for Job Books.- Transmit documentation and submittals through the project management platform.- Receive, log, and track plans and specifications as received including all revisions.- Maintain all required hard copy and electronic copy files of project documentation.- Support project team with regards to submittals, RFI's, drawings, specifications, and other project documents. Site Administrative Management:- Participation in selection and training of on-site administrative staff regarding specific job duties, including but not limited to, document control, accounting support, SAP, and standard processes.- Manage company IT equipment and office supplies transfer from one project to another.- Support project site team in getting site staff for construction equipped with all standard office, safety, and IT equipment.- Support the implementation of the inspection the testing plans.- Support the training and on-boarding of new site team.- Manage the different Service Agreements for the project, including NDA's, MSA's, CSA's and SOW's. EPC RFP & Contracting Process Support: - Support the Project Engineering & Construction Manager during the RFP process.- Prepare BoP contract exhibits (including the SOW, technical specifications, drawings, quality, and safety requirements) before launching the RFP.- Ensures construction contracts are aligned (back-to-back and no gap) between Owner Supplied items, DBS contracts and other construction interfaces.- Support the review and response to bidders RFIs.- Work with project team to evaluate bids and award contracts.- Support the EPC contracting process with the selected EPC-contractors, including the Exhibits negations. General:- Track proper reporting of key project safety metrics on a monthly and quarterly basis for all projects and contractors.- Support of company initiatives, such as implementing new processes, procedures, or development of department specific tools.- Performs other duties as assigned.
POSITION SUMMARY:Experienced professionals and recent graduates can discover a fulfilling, long-term career with a technology and innovation leader, where they'll find more than just a job. The company offers an exceptional work environment, providing its staff with a comprehensive benefits package, flexible work schedules, and an outstanding 401K match, among other perks.There is an exciting opportunity for a highly motivated transportation engineer seeking career advancement. The role involves designing and leading a variety of transportation projects for State, County, Tollway, and Local Agencies, as well as managing transportation design projects. The ideal candidate will have experience in both of these areas and be a team player, working collaboratively with diverse disciplines and offices. The position may be available in various locations.POSITION DUTIES: Manage and complete engineering plans and specifications production according to IDOT StandardsManage and complete Federal Aid Phase I and II projects for a variety of clientsLead various projects and study types, including roadway, underground utility, drainage, traffic, and infrastructure improvementsProvide general civil engineering services for municipal, county, and state clientsOptional: Assist with business development and client management opportunities for transportation and infrastructure projects. REQUIREMENTS: B.S. degree in Civil Engineering4+ years of experience in roadway and infrastructure design using IDOT StandardsPreferred: MicroStation/Geopak capabilities with an understanding of IDOT workflowAbility to travel throughout Baxter & Woodman's IL service area (own transportation required)Ability to independently handle a variety of ongoing tasks and responsibilitiesStrong written, verbal, computer, and organizational skillsLicensed Professional Engineer or ability to attain within 1 yearWork within a Team-first culture that encourages individual development and accomplishment of goals