Senior Electrical Engineer (MEP) - Northern California
- Location: Napa
- Salary: $120k - 150k per year + Full Benefits, Annual Bonus, Retirement (401k)
Job Title: Senior-Level Electrical Engineer
Locations:
Job Summary:
This position requires extensive and comprehensive knowledge in the subject area, sound judgement, effective decision making and the ability to communicate effectively while working cooperatively with team members and clients. The essential functions of this position also include technical mentoring or staff and may include managing staff as appropriate. A Senior Engineer shall procure work for the company, by attending client “meet and greets” but especially by providing excellence to our clients to ensure repeat business. The values “quality”, “integrity”, and “expertise” may be helpful reminders regarding the expectations of the Senior Engineer.
Key Responsibilities:
Qualifications:
Locations: San DiegoLos AngelesNewport BeachIrvine QUALIFICATIONS BS in Electrical Power engineering or related fieldPE license in Electrical Engineering (licensed for at least 3 years)Minimum 7 years of experience in electrical designExperience with AutoCADKnowledge of Title-24 Part 6 California Energy Conservation CodeExcellent verbal and written communication skills Preferred Qualifications: Experience with REVITExperience with multi-family, commercial, institutional, and higher education projectsExperience with SKM and/or ETAP programsProject Management experience Compensation and Benefits: Approximate Base Salary - $90k-$130k based on experience.Paid overtime at 1.0 times hourly rateCompetitive end of year discretionary bonus based on company/team/personal performance.Hybrid Work Schedule (2-3 days In Office)401k with 5% Contribution Matching for 9% Employee Contribution
Description:Responsible for oversight of substation engineering and consulting services for clients across the US and internationally. Main responsibilities include leading others in creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. This position can influence the future of the resiliency and reliability of the electric grid. Opportunities to advance into leadership/management roles are available. Position may include full or partial responsibility of the following assignments: Lead in preparation of proposals and scope development, including: Conceptual designs and execution plansEngineering/project cost estimates and schedules Lead in the execution of engineering activities: Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of materialProtection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiringCalculations for studies and reports (grounding, lighting protection, AC/DC load studies, etc.)Equipment specifications for procurement and/or factory acceptance testing Lead coordination of design activities with other departments (Civil/Structural, Networks, Transmission Line, etc.)Develop and improve processes, tools and/or technology implementationsProvide leadership, training and mentoring to less experienced engineers and team membersRegularly meet and correspond with clients or outside personnelPerform quality reviews for other engineers and designersProvide short term field support during constructionSupport business development and marketing initiativesOther areas of involvement may include: relay settings, 3D modeling/design, or industry/professional technical committee involvement Requirements: Bachelor's degree in Electrical Engineering from accredited program Minimum 7 years related experience (completion of master's degree in related field may be substituted for one year of experience)Professional Engineer registration strongly preferredProficiency with National Electrical Safety Code and IEEE / ANSI StandardStrong preference for those with: Excellent written & verbal communication skillsStrong analytical and problem-solving skillsCapability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria
Qualifications: 5-7+ years' experience and a P.E. License.Ideal Projects: Mission Critical - Data Centers ExperienceAviation ExperienceCommercial Other projects are open to consideration - this position is relatively flexible. Compensation Ranges: $110,000 - $160,000+ (Commensurate w/ Experience) Benefits: Paid Parental LeaveHealth Vision Dental401k matchPTO Starts at 3 weeks, upward flexibility for sure.HolidaysSick Time ECOPass for DenverPaid parking in Phoenix Requirements A bachelor's degree in electrical engineering or architectural Engineering from an ABET accredited four-year college or university.Registration as a Professional Engineer or Architect.This position requires a strong understanding of the mission critical industry and the nuances of renovation and greenfield construction projects.Successful performance at this career level typically requires 10 - 15 years of relevant work experience in Engineering or Construction Management in the Mission Critical industry.Experience designing of medium voltage, power monitoring, lighting, and lighting controls systems a plus.Strong verbal communications skills and ability to present solutions to project teams and clients.Demonstrated ability to manage and collaborate with diverse team members who are geographically dispersed utilizing a combination of virtual technology and in-person meetings.Must be available to travel occasionally.Requires the ability to pass background checks or security screenings as required by our clients.To be authorized to work in the United States and have proof of COVID Vaccination. Responsibilities: Be the technical lead for the electrical engineering and design of high-tech facilities, including new data centers, facility expansions, and system upgrades.Create power design for complex electrical systems including UPS and generator support systems.Have expertise in power distribution, grounding, standby power, uninterruptible power, and related systems.Possess proficiency in the development of electrical one-lines, specifications, calculations, studies, and software-based systems analysis.Have a strong understanding of building systems and inter-discipline coordination.Be comfortable leading, mentoring, and delegating portions of design work to project engineers, designers, and BIM/CAD staff.
Requirements: Registered Professional EngineerBS/EE related discipline from an accredited four-year college or university12 or more years’ experience, working in the AEC Industry with vast knowledge of Electrical AutoCAD, Revit, NavisWorks (All, or a combination)Strong communication, writing, and organizational skills Experience with lighting software (visual and/or AGI32) Experience in indoor and outdoor lighting design Responsibilities: Manage Budgets, scopes, proposals, and work force allocation.Serves as primary project technical spokesperson and as a designated client contact; coordinates regular plan reviewsPrepares design computations, load, fault current, illumination, voltage regulation and protection device coordination studiesResearch code and regulatory agency issues and coordinates with code/agency officials in resolving project questions/issuesDevelops probable construction cost opinions for his/her projects within the departmentAttends client meetings -- days or nightsAnalyzes reports, drawings, blueprints, and test results to plan and design projectsPerforms field inspections, investigations, and site observations on construction sites; responds to construction issues raised by contractorsPrepares reports, business correspondence and procedure manuals
The Senior Electrical Engineer will lead electrical design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities. The Senior Electrical Engineer will lead the project team throughout the design and construction process, adapting electrical plans according to budget constraints, design factors or client needs. Lead electrical design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by the project managers. Prepare electrical equipment: packaged equipment specifications and data sheets, Request for Qualifications (RFQ's), technical bid summaries, and purchase recommendations. Review electrical equipment vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers. Participate in development of project schedule, scope, budget staffing planning and construction planning. Responsible for effective management of change orders. Applies expert knowledge of commonly used electrical concepts, practices, codes and procedures within the electrical engineering services industry. Applies knowledge and experience to complex projects, find non-standard design solutions. Quality review production drawings for a variety of projects and project related data as required by the project managers to verify corrections are made within multiple CAD related software. Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of electrical systems. Leads field inspections, installation, measurements or calculations for public and private clients. Prepare and present technical reports for clients and industry publications. Build effective relationships with existing clients, customers and contractors and develop new business opportunities. Responsible for ensuring customer satisfaction goals and expectations are met. Participate sales and marketing efforts and identify key pursuits. Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance. Prepare and present project budgets and cost estimates. Report project performance. Provide leadership, guidance and instruction to the electrical engineering practice. Mentor and guide less experienced engineers. Responsible for QA/QC process adherence. Responsible for effective communication with other engineering disciplines.
Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation. Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following: Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English. Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.
Job DetailsDescription We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.Electrical Engineer with an emphasis on power generation. Multi-discipline projects in hydro, gas and fossil power generating facility experience is required. Duke, TVA, Exelon, Dominion or other power industry experience is desired. Desired experience includes low voltage and medium voltage power distribution, motor controls for both low voltage and medium voltage, interfacing industrial processes to DCS and/or PLC systems and the use of power distribution system modeling software (ETAP or similar). Need to be familiar with panel design, and 3D environment.Candidate needs to be a leader, capable of coordinating engineering and design efforts, working within a team, and comfortable being in front of peers and clients leading/conducting meetings. At times job duties will require coordinating with project managers, and client to develop proposal documents and estimates to facilitate bidding on work. Work will mostly center around modifications and upgrades in existing facilities. Experience in relay protection would be a plus.Travel RequiredYes. Occasional one or two day site visits.QualificationsSkillsRequiredElectrical EngineeringIntermediateBehaviorsRequiredTeam Player: Works well as a member of a groupLeader: Inspires teammates to follow themDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellDedicated: Devoted to a task or purpose with loyalty or integrityMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsSelf-Starter: Inspired to perform without outside helpEducationRequiredBachelors or better in Engineering.ExperienceRequired4-10 years: 4-10 years of progressive experienceLicenses & CertificationsPreferredProf Engineering (PE)
Essential Functions: Design electrical infrastructure for photovoltaic systems, incorporating electrical engineering knowledge, solar photovoltaic system design principles, and industry best practices.Develop construction documents based on customer requirements, engineering decision-making, and compliance with NEC and CEC codes.Address comments from the Authority Having Jurisdiction (AHJ) during the permit review process, following company SOPs, to facilitate timely issuance of building permits.Conduct technical reviews of system components and ancillary devices to ensure compliance with design specifications.Provide prompt responses to Requests for Information (RFI) from field installation personnel, in accordance with company SOPs.Review testing data from internal field personnel and third-party testing agencies to ensure product quality.Provide engineering guidance and internal training to the company upon request.Support other departments with electrical questions and problem-solving throughout the construction process.Perform other assigned duties as required. Knowledge, Skills, and Experience: Required: Strong verbal and written communication skills in English.Ability to multitask and manage multiple projects simultaneously.1-3 years of design or engineering experience related to renewable energy.Proficiency in AutoCAD.Proficient in MS Office.Knowledge of photovoltaic systems, NEC requirements, and construction practices.Effective prioritization and task execution in a high-pressure environment.Willingness to learn and apply new technologies.Valid driver's license.Bachelor's degree in Mechanical Engineering or Electrical Engineering. Preferred: Proficiency in PVSyst.Master's degree in Mechanical Engineering, Electrical Engineering, or related discipline.EIT Certification.
Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. This position can influence the future of the resiliency, reliability and economic operation of the electric grid. Opportunities to advance into leadership roles are available.Position may include leading or executing the following assignments: Preparation of proposals and scope development, including conceptual designs and execution plansPrepare engineering cost and man-hour estimates and schedulesPhysical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of materialProtection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiringPrepare calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.)Prepare equipment specifications for procurement and/or factory acceptance testingCoordinate design activities with other departments (Civil/Structural, Networks, Transmission Line, etc.)Provide guidance and mentoring to less experienced team membersRegularly meet and correspond with clients or outside personnelPerform quality reviews for other engineers and designersProvide short term field support during constructionSupport business development and marketing initiativesOther areas of involvement may include: relay settings, 3D/intelligent design, or industry/professional technical committee involvement Requirements: Bachelor's degree in Electrical Engineering from accredited program Minimum 3 years related experience (completion of master's degree in related field may be substituted for one year of experience)Completion of FE exam strongly preferredProficiency with National Electrical Safety Code and IEEE / ANSI StandardStrong preference for those with: Excellent written & verbal communication skillsStrong analytical and problem-solving skillsCapability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria
My client are a full-service, utility scale, solar and storage developer bringing projects from origination through development. The company has a portfolio of projects in late-stage development totalling 6GW solar and 3GW storage across three key markets of the UK, Australia, and Ireland. As of 2022, they agreed to sell the UK’s largest solar PV transaction to date consisting of a portfolio of 12 projects with a combined capacity of 519MW of projects including 70MW of collocated energy storage capacity to Scottish Power Renewables (UK) Limited, a wholly-owned subsidiary of global utility Iberdrola Group. Responsibilities: Establish and lead a team of electrical design engineers to design and deliver efficient connections for the clients portfolio of solar and storage assets.Undertake primary and secondary electrical design for 33 kV and 132 kV solar and storage connections across the UK. Engage closely with DNO’s to ensure timely approval of contestable designs in accordance with each DNO’s functional specifications.Lead the partial and full NERS accreditation processes to obtain ICP status for electrical design. Lead the establishment and development of the necessary tools and templates required to efficiently undertake ICP designs to a standard acceptable by DNOs.Co-ordinate the implementation of a best practice management system for undertaking electrical designs in compliance with the NERS standard. Manage the engagement of specialist consultants to establish the necessary policies and procedures as well as external NERS auditors to achieve and maintain accreditation.Apply your electrical engineering knowledge to undertake primary and secondary electrical designs for contestable grid connections for solar and storage using industry standard software programmes (AUTOCAD, CDEGS, PowerFactory, ETAP etc.), automating time consuming processes where possible.Provide engineering support to the project development team to ensure efficient and cost-effective grid connection strategies are pursued for solar and storage projects.Develop and foster close working relationships with DNO’s to collaborate and negotiate on grid connection options, costs, and timelines and achieve successful outcomes in contestable design review processes.Manage a database of grid connection costs for primary, secondary, and auxiliary electrical equipment associated with the connection of solar and storage projects to assist in financial modelling for prospective projects.Support the delivery of the project pipeline to energisation by providing electrical engineering guidance throughout the design, procurement, construction, and commissioning phases. Requirements: Degree in electrical engineering or similar.Technical understanding of the primary and electoral design and of high voltage grid connections for generation connections.Proven track record in undertaking ICP designs in the UK (5+ years).Proficient in electrical design software packages (AUTOCAD, PowerFactory etc.)Knowledge of the technical characteristics of utility scale solar PV and Battery Energy Storage Systems (BESS) is desirable.Ability to communicate with DNOs to achieve positive project outcomes.Excellent inter-disciplinary communication and presentation skills.Ability to manage relationships with multiple stakeholders effectively.Strong focus on Health, Safety & Environment.Chartered/Incorporated status is desirable. This is a hybrid role. Attendance at the London office will be required 3 days minimum per week and occasional travel to the main hub office in Dublin is expected.
Essential Functions Develop CPSD products designed for local manufacture. Lead design improvements and cost reduction initiatives for existing UPSD products.Develop and design U.S. components to replace imported components where beneficial to overall CPSD products quality and cost.Review order documents to ensure company meets the technical requirements of the contract, including exceptions, clarifications, and confirmations to the customer's technical specifications when required.Prepare and lead others in preparing product Bills of Materials, design drawings and specifications required to support order placements and manufacturing/assembly operations; prepare instruction books and renewal parts lists; and review or approve technical software submittals required to support order placements, manufacturing/assembly operations and customer needs.Provide design leadership, direction and clarification for internal and external design teams. Act as project lead for design, test and prototype programs.Work with customers and vendors to resolve technical issues and answer technical questions.Provide technical leadership and information concerning assembly, testing techniques, and process advantages and limitations which affect long-range plant and product engineering planning.Research and analyze operational test data to establish performance standards and to confirm if designs meet functional and performance specifications.Lead in assisting Manufacturing and Quality Assurance with any design-related production problems.Coordinate product design with listing agencies to obtain product listings such as UL.Travel to customer's site and/or trade shows to provide product support as required. Provide presentations and training as required. Qualifications Bachelor's degree in Electrical or Mechanical Engineering with a minimum of 7 years' of experience in a design engineering capacity, or equivalent education and experience.Advanced knowledge of UPSD products, switchgear, transformers, and battery systems.Advanced analytical and problem solving skills.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees, and vendors.Ability to read, understand and create technical drawings and materials.Ability to work on several projects simultaneously.Advanced computer skills, with emphasis on MS Office products, CAD and engineering analysis software.
Job Title: Mid-Level Mechanical EngineerLocations: San DiegoLos AngelesNewport BeachIrvine Job Summary:We are seeking a mid-level Mechanical Engineer to design mechanical systems for residential and commercial buildings. The successful candidate will have a solid understanding of Mechanical Engineering fundamentals, working knowledge of California Codes & Standards, and experience in designing HVAC equipment, air distribution layout, plumbing systems, and performing engineering calculations.Key Responsibilities: Engineer mechanical systems from the conceptual design phase through construction.Attend meetings with clients and take meticulous notes.Design HVAC equipment, air distribution layout, plumbing systems, and perform engineering calculations.Understanding of Mechanical Engineering fundamentals.Working knowledge of California Codes & Standards.Ability to provide responses to Requests for Information (RFI’s) and Submittal reviews.Competent in following software: AutoCAD Revit,Energy Pro, Navisworks, or similar clash detection design tool and MEP Fabrication. Qualifications: Bachelor’s degree in mechanical engineering or a related field.3-5 years of experience in designing mechanical systems for residential and commercial buildings.Professional Engineer (PE) license preferred.Strong analytical, problem-solving, and critical thinking skills.Excellent communication and interpersonal skills.Ability to work independently and as part of a team.