Senior Mechanical Engineer
- Location: Perth
- Salary: $0 per year
Senior Mechanical Engineer
Piping Design Experience
Oil & Gas Experience
Pipe Stress Analysis
Knowledge and Experience with Gas Pipelines, Pressure Vessel and Tanks
8 years + experience
Perth or Adelaide based - Interstate candidates will be considered
Office based role
8 hours days
Monday - Friday
$940/day + Super. Based on an initial 12 month contract - Ongoing.
adib.jambol@spencer-ogden.com
The ideal candidate for Senior Mechanical Engineer will be responsible to lead the planning, execution, monitoring and control of the maintenance of assets; in line with the Company's key business goal. Provide daily technical support to rigs under remitAssist with technical downtime issuesLiaise with OEM's as requiredTravel offshore to assist in technical problem solving and troubleshooting as requiredAssist with technical audit function in relation to maintenance and technical proceduresAssist with PM development as requiredAssist with annual budget preparationAssist with offshore minor projects and rig modificationsAssist rigs in follow up to ensure compliance with Technical MOC procedureAssist with follow up on onshore equipment repairs as requiredAssist with client related technical issuesCarry out rig familiarisation visitsAssist with Project Engineers when requiredAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all rig mechanical systems and controls fleet wideBe prepared to travel worldwide at short notice when requiredLead safety by example for all employees to followPromote safety awareness and safe work practice among all the personnelReport all hazards and positively intervene in all observed unsafe actsParticipate in emergency drills, including post-drill debriefs Candidate should fulfil the following: Preferably a degree in Bachelor of Engineering (Hons) in Mechanical and minimum 5 years' experience in technical support and or project engineeringFamiliar with computerised control systemsExperience on /with Offshore Drill Rigs and Rig equipment and TroubleshootingSound knowledge of rotating equipmentSound knowledge of hydraulic controls and systemsTrained in Mechanical trade or engineering degree
As an Offshore Foundation Structural Assessment Senior Engineer F/M you will be involved in delivering multi-level ongoing projects in the offshore wind whilst looking at the wider renewable energy business in general, contributing and developing broader technical solutions for business.You'll be part of an enthusiastic and committed team of Engineers and Technicians to deliver high-quality output on projects. Client care and repeat business are crucial to success. This means you enjoy developing and nurturing relationships with clients.You will have a good understanding of the technical engineering requirements of offshore wind turbine structures. As an Offshore foundation structural assessment senior engineer, you will be Performing structural calculations mainly using the finite element calculation method (FEA) to include: Analysis of Structural ModelsMonitoring calculations and detailed drawingsSelection of load cases (environmental conditions, a turbine in production/shutdown, etc.)Post-processing of extreme loads and fatigueAnalysis of the results and recommendations on the designData flow managementEnsuring technical compliance with the relevant regulations and client specificationsCompletion and delivery of high-quality technical reports. and you will carry out the dimensioning of structures: In the pre-design, design, basic, and detailed engineering phases (typically offshore jacket/monopile wind turbine foundation).Analysis of structural designs and gradually develop expertise in a wide range of offshore structures including static & dynamic analysis, fatigue analysis, impact analysis, fracture mechanics, Finite Element Analysis, wave dynamics, seismic design, engineering materials, etc. The role is based in Nantes, France, and the incumbent will have the right to work and reside in France.In this hybrid role, you will have a defined work location that includes remote work from home, in the office, and offshore/on-site as agreed with your manager.Flexibility to working hours and willing travel locally and internationally may be required occasionally.What we are looking forWe are looking for a determined, results, and client-oriented professional with a supportive and global mindset, and excellent interpersonal skills. The successful candidate should be passionate about innovation, and progress and enjoys working in a dynamic and multicultural environment both independently and as part of a team. In addition, you: Hold a Master's degree (or equivalent):structural mechanics and/or solid mechanics.Have at least 3 years of experience in the offshore field (Wind or Oil & Gas) in the dimensioning of offshore foundation structures, mainly of the jacket or monopile type.Will have Knowledge of mechanical characteristics of metal/concrete/composite materials (RDM).Have an in-depth understanding of at least 1 of the following: ANSYS / SACS / ABAQUS / SESAM.Knowledge and/or practice of standards such as DNV-GL, IEC, API, AISC, and Eurocodes.Are fully proficient in English, and French is an advantage.Practice in code checking, yielding, buckling, and fatigue, in ULS, FLS, and ALS conditions could be an additional advantage.
As part of my clients ongoing development, they are now seeking to complement their growing Technology Services team with experienced Senior and Principal Power Systems Engineers. This role is highly important in ensuring the business continues to thrive and grow, always with a view to their passionate aspiration of supporting the world’s transition to net zero. The Technology team operates across a broad range of projects from single wind turbine installations and onsite generation to multi-GW offshore generation, grid and private wire projects. You will liaise with power systems and engineering design teams and work closely with the Head of Development, Project Management and the Director of Technology Services, to refresh and enhance systems and practices.DUTIES AND RESPONSIBILITIESYour role will focus primarily on: Engaging with the electricity transmission, distribution companies and the Electricity System Operator in the UK.Understanding of the UK Grid Code and specifically application of the requirements to generation projects.Practical experience conducting detailed power system studies including load flow, short circuit analysis, fault ride through and EMT using industry standard software solutionsSharing your knowledge and experience with the team to further develop the team’s expertiseManagement and mentoring of graduates/consultants.Understanding, communicating, and analysing energy regulatory framework and keeping abreast of changes and impacts to clients.Developing business relationships with companies and co-professionals that will provide new opportunities for the business to provide our range of services. PERSON SPECIFICATION Degree qualified in a relevant discipline (e.g., Electrical or Mechanical engineering) or equivalent professional experience.Experience in, or willingness to learn client management and development of longstanding client relationships.Experience in, or willing to learn the financial management of projects, meeting strict timelines and budgetsCommercial awareness of the energy industry.Good working knowledge of the full lifecycle of regulatory framework for connection renewable projects to the grid for both Transmission and Distribution projectsExperience of dealing with Ofgem would be an advantageExperience in the Offshore and Onshore renewable energy sector and knowledge of the oil and gas sector would be an advantage. LOCATION: Remote (Edinburgh. Glasgow, London and Bristol)
I am currently resourcing for one of my top onshore drilling clients. They require a Rig Mechanic for the following project: Field Service Mechanic2/2QLD based - Toowoomba is base/workshop and Point of HireLooking after 3 rigs in totalProvided field service truckASAP start Requirements:LR Drivers LicenceIFIAUS Trade CertifiedAustralian Resident If you are interested in the role please reach out and send your resume to lewis.houghton@spencer-ogden.com
The ideal candidate for Senior Electrical Engineer will be responsible as the Technical Support Engineer to facilitate asset reliability and ensures uptime of the vessels; in line with the Company's key business goal. Provide drilling fleet technical supportAssist and lead on technical downtime issuesLiaise with OEM'sInvolved with annual equipment inspectionReview vendor quotations and costings for major equipment repair. Prepare overhaul work-scope for major equipment to ensure OEM correct and accurate pricings on repairs and overhaulsPrepare repair work-scope for capital equipment (5 yearly)Regularly review, development and updating of the planned maintenance system (Star) for electrical equipmentTravel offshore to assist in technical problem solving, repairs & troubleshooting as requiredAssist with annual budget preparation for capital equipment expendituresAssist with and ensure compliance of TMOC procedureAttend equipment D&I/commissioning at vendor facilityAssist with client related technical issuesCarry out rig internal technical auditsAssist Projects/Newbuilds EngineersAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all electrical rig systems and controls fleet wideBe prepared to travel worldwide at short notice as and when required Candidate should fulfil the following: Preferably a Degree in Engineering (Hons) in Electrical & ElectronicsMinimum 10 years of experience holding the role of technical support and/or project engineering in O&G industryTrained in the following: LTI Driller/ Draw works Control Course; LTI Top Drive Control Course; Advance Siemens PLC STEP 7 Programming Course; Siemens & ABB VFD Course; Siemens PLC STEP 7 Programming Course; TDS- 8SA Top Drive Course; C++ Programming; MD Totco Drilling Instrumentation Course; Ex Certified; NOV Amphion Control System; HVAC CertificateExperience in offshore drilling or upstream industry with hands-on experience in drilling systems is a plusHighly skilled and efficient trouble shooter
Bachelor’s degree in Engineering in Petroleum / Mechanical / Process or equivalent.10 years’ experience in well services / petroleum engineering and operations.Broad knowledge / engineering expertise in all related disciplines in well completion such as geology, reservoir, drilling, production, etc.Ability to integrate and communicate with specialists of corresponding disciplines.
Asset Integrity Engineer$1000/day + Super8 hour days Monday - Friday - Perth BasedWorking for an Oil & Gas operatorInitial 12 Month ContractFebruary StartMechanical or Corrosion Materials Engineering backgroundRBIFFSNDTCSWIPNACE
As an I&C engineer, work with a team of I&C engineers and designers, and other disciplines, to perform detail engineering, including front-end planning work, develop I&C quantities and cost estimation, conduct conceptual studies, perform technical quality reviews, attend Factory Acceptance Testing (FAT), and support construction & commissioning activities . Work under a direct supervision of an I&C lead or work independently on smaller projects or standalone activities. Knowledge of instrumentation and control systems (PLC/DCS) is required.Prepare instruments and control system specifications, instrument inquiry/bid packages, technical bid summaries, and purchase recommendations.Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.Participate in the development of P&ID's and equipment/construction subcontract package specifications.Develop instrument index, I/O list, cause & effect and logic diagrams, and control narratives.Work with the India I&C team and other disciplines to produce I&C engineering and design deliverables.Work with clients and vendors for information required to complete engineering design deliverables on schedule and building long working relationship.Interface and support construction personnel directly from the office and support construction and pre-commissioning activities in the field, as required.Work with SmartPlant Instrumentation (SPI) and other smart tools to produce engineering and design deliverables.Able to support construction and startup & commission activities in the field, as required Requirements: Bachelor's degree in Electrical Engineering, Mechanical Engineering or Chemical Engineering from accredited program required.Engineer-In-Training (EIT) Certification recommended.3 years related experience. Completion of master's degree in related field may be substituted for one year of experience. Strong analytical and problem-solving skills.Attention to detail.Ability to clearly communicate both verbal and written technical information.Must be proficient in the use of computer software (i.e., MS-Word, Excel, PowerPoint, Access).Valid driver's license required. Must be willing and able to obtain, or currently hold a valid Transportation Worker Identification Credential (TWIC).
Senior Petroleum EconomistJob description- Overall responsible for Upstream assets and development projects economic valuation in SMJSB.- A member of SMJ EP team, reporting to SMJ Upstream Director, working together with other members of SMJ EP team and assisting SMJ's Upstream Director to deliver SMJ EP business objectives- Responsible to develop, update and maintain petroleum economic and financial models, perform regular quality checks to ensure models are bugs free, accurate and efficiently organized and documented for quality control and audit trail purposes- Responsible to organize and quality check on input data and assumptions, on technical and financial, to the economic and financial models and quality check on output data to make sure modelling and calculations are error free prior to releasing results to stakeholders- Responsible to perform exploration and late life asset economics both using deterministic and probabilistic approach- With the support and input from external consultant, carry out comprehensive economic evaluations backed up with appropriate commercial terms in all Upstream asset acquisition exercise.- Responsible to prepare and report out, make presentations to management team on results and recommendations on economic and financial evaluations- Contract holder and manager for engaging external consultants on inputs to Upstream economic and fiscal terms modelling.- Actively participate in company's HSE and CSR initiatives and programs that include but not limited to, safety observations and HSE Trainings, community and society contributionsQualifications and Skill:- Minimum with Bachelor's degree in petroleum engineering or equivalent engineering or economics- Min 15 years' experience in the Oil & Gas company with considerable experience in petroleum economics- Experience in Upstream commercial negotiation would be an added advantage- experienced in managing wide range of petroleum economics and fiscal terms in Malaysia like PSC and PITA terms, cost recovery, ARO issues etc..- experienced in managing wide range in exploration (EMV approach), project FIDs (incremental approach) and production economics (enhancement, efficiency and Late Life Assets).- Strong and fast in Microsoft office tools and good data management skills- Strong analytical and strategic thinking skills and the ability to draw and support technical and commercial conclusions. - Good communication and presentation skills, strong interpersonal skills. Ability to express professional opinions both orally and in writing. - Able to mentor junior petroleum economist staff in EP works. - Able to cope with high pressure working environment in fast turnaround and off office hour works.
Responsibilities Assist process engineering design and coordinate process engineering deliverables with Engineering firm Including, but not limited to: Review vendor equipment approval drawings with focus on interface management between vendorsReview/approve PIDs generatedReview/approve PFDs generatedReview/approve Area Process Narratives/Functional descriptionsReview/approve Equipment specificationsReview/Approve Instrumentation specificationsReview/approve project Basis of Technical DesignReview/approve mass and energy balancesPerform project engineering role with focus on schedule and on facilitating clear communication between the various stakeholders on technical barriers to design advancement.Support construction efforts by answering technical questions and providing quality control oversight on installation and startupAssist with equipment layout developmentProvide technical assistance to procurement and project management with equipment bidding process, including package documentation, bidding, Total Cost of Ownership (TCO)s and bid comparisons. Generate project mass and energy balancesReview and provide feedback on equipment, line, valve, specialty item and instrumentation lists generated by Engineering firm.Ensure project compliance with engineering and equipment standardsApply process safety management (PSM) experience to assist with items such as management of change (MOC) and pre-start up safety reviews (PSSR).Interface effectively with commercial, safety, accounting, legal, environmental, engineering, QA/QC, process safety management, and procurement to assist with project needs.Develop plans for commissioning/start-up and assist in executing same. Education/Experience/Skills Required Bachelor’s degree in Engineering or applicable related field.5 to 10 year total industry experienceMinimum of 5 years experience with field work or operations or constructionMinimum of 5 years experience working with Process Safety principlesExperienced in using TEAMS, Microsoft Word, Microsoft Excel, Visio and PowerPointExperienced in using Navisworks 3D viewing softwareBuilds Shared Vision
Job Decriptions Provide reservoir engineering expertise, including expertise in field development planning, reservoir modeling/simulation, economic evaluation, feasibility studies, and due diligence.Expertise in conducting reservoir engineering analysis and economic evaluation utilising technical and economic software packages (Petrel, Eclipse) or industry-equivalent software packages. Assess and evaluate option to optimise production and recovery utilising data acquisition, interpretation, and analysis as well as techniques such as static and dynamic model utilising reservoir simulation software, well test interpretation, reservoir surveillance (KAPPA Suite, OFM, etc.), and well performance modelling. Contribute to the evaluation, classification, and audit of reserves and resources in accordance with the SPE Petroleum Reserves Definitions.Collaborate with multidisciplinary teams to identify, execute, and optimise well performance opportunities.Supervise and provide direction for drilling and field production operations. Requiremnts Technically proficient, with an MSc in reservoir engineering, petroleum engineering, or geosciences. Minimum 8 years of relevant practical experience in Geomodelling/Reservoir engineering from an E&P company and/or oilfield services company, with proficient skills in using Petrel and flow simulators like ECLIPSE and similar tools.Curious, self-driven, willing to learn and share knowledgeStructured, analytical, and proactive approach to solving business problems and client challenges. Energetic team player, willing to travel. Programming skills such as Python are desirable.Proficient in English (written & spoken).-Malaysian only / Right to work in Malaysia.
One of Spencer Ogden's LNG clients is seeking a Process/Project Engineer to join them on a one year contract with the possibility of extension. The role will require candidates to be local or be willing to relocate to the Houston area.Minimum Qualifications A Bachelor's Degree in chemical engineering.8+ years working on EPC projects.US, Mexican or Canadian citizenship or a green card Responsibilities Experience reviewing regulators FERC and PHMSA documents and questiosns or experience on LNG projects.Participate in the review of P&ID's, PFD's and other design drawings.Participate in Process Hazard Analysis, HAZOPS or other formal hazard assessment groups.Assists in developing responses to regulatory agencies FERC and PHMSAProvide company supervision to the safe work of the EPC contractor and subcontractors. Details 1 year contract with the possibility of extensionRate: NegotiableLocation: Houston