Utilities design engineer
- Location: Vereinigtes
- Salary: Very competitive hourly rate outside IR35
Looking for a utilities design engineer to work on a project they have won in the middle east
This candidate can go into anyone of their 3 offices, Dublin, London or Birmingham.
Would be a minimum 12 month contract project is running until 2025
5-7 years experience
DISTRICT COOLING SYSTEM experience is essential and the area where they are really lacking skills
Has to have experience with outside Infrastructure and not just internal building MEP experience
District cooling experience connecting up with the utilities hub.
Some experience in the middle east would be preferable
Start date within a month if possible but can wait a maximum of 2 if someone has a notice to serve
2/3 days a week in office
About the job Central location (remote working available)Latest in mobility & automation technologyDeliver some of Australia's largest mobility infrastructure projects Spencer Ogden have recently been engaged by a tier 1 international specialist transport engineering supplier. We are recruiting Senior and Principal Signal Design Engineers to join a world-class engineering team to deliver one of the largest rail infrastructure projects in Australia. In this role, you will be responsible for: Preparing and producing functional design documentation including system requirements and architecture, interlocking data, signalling plans, interface control, scheme plans, control tables and circuit designEnsuring designs adhere to quality procedures and Australian railway operator standardsWorking and managing designs autonomouslyCoaching and developing junior engineers To be successful in this role, you will have: Relevant tertiary degree (electrical engineering or similar)Relevant professional membershipsExperience with MicrolokFamiliar with ATP, ETCS, CBTC rail environments Get in touch with Michael Ho for more information on 08 6280 2409 or send an email to michael.ho@spencer-ogden.com
As an Engineer in this role you will: Help create new communities and associated infrastructure in Melbourne's growth corridors. Develop functional designs and computations for road safety projects, signalization of intersections, upgrades to existing intersections, duplications of arterial roads, bus bays and car parks.Work collaboratively as part of a team with project managers, senior engineers, draftspeople and other specialised departments.Prepare plans, computations and documentation for projects in accordance with the client brief and local standards, within specified budgets and time schedules.Liaise directly with relevant stakeholders, including clients, councils and local authorities in a timely and efficient manner. Required Skills and Experience: Tertiary qualifications in Engineering (Civil or Environmental Engineering or relevant equivalent)Minimum of two years' experience in a similar roleStrong knowledge of local design standards and statutory authority codesProficient 12d or MicroStation design skills and working knowledge of AutoCAD What we can offer: Excellent professional development & career progression opportunitiesMentoring from industry leading senior engineersA competitive salary packageA range of great staff benefits; including paid maternity & paternity leave, opportunity to purchase additional annual leave, employee assistance programA supportive, diverse and inclusive work environment where professional development and career growth are strongly supported and encouragedExcellent work-life balance
We are seeking a Signalling Design Engineer to join a growing consultancy within the Rail Sector here in Melbourne. The role: High level signalling design work from concept through to detailed designAbility to work on major complex projectsContribute to overall company mission and valuesStrong potential for career advancement with the ability to progress towards either a technical or leadership positionStakeholder engagement Your experience: 4+ years’ experience in signalling design roleProven track record in demonstrating a strong client focus and delivering work to deadlinesExperience using MicroLok software will be highly regardedRelevant tertiary qualification Benefits: Attractive salary packageRegular Friday night drinks with the team!Work with an exciting group where you will be challenged each day. Interested? Apply NOW, alternatively if someone in your network is suited to the position, please send a recommendation to lachlan.padbury@spencer-ogden.com
About the Opportunity: Spencer Ogden have partnered with an established engineering company based in Perth CBD. This company is renowned for delivering highly creative and sustainable solutions for our built environment with a track record of delivery excellence. Having seen exponential growth nationally, our client is currently growing its specialist team of Permanent Way Design Engineers to deliver a range of projects across Australia. Based in Perth, you will be an integral part of the national team delviering specialised rail engineering solutions for major private and public railway operators in Australia. About the Role:In this role, you will be accountable for: Leading projects with visibility over budgets and delivery deadlinesGuiding and mentoring members of the national rail teamProduce, review and verify perway engineering designsSupporting with bids and proposals in line with business objectives About you:To be successful in this role, you will bring: Relevant engineering qualifications (chartership - highly desired)10+ years expereince in railway track designDemonstrated proficiency in perway alignment design and track components specificationSound knowledge of railway engineering safety standardsProficient in 12D and other engineering design software systems What's in it for you?On offer is a permanent full-time position with clear visibility for career progression and professional development. Based in the Perth CBD, there is easy access to public transport and lifestyle amenities. Next steps:To apply, send through your updated CV in an application. If you have any questions, don't hesitate to reach out to Michael Ho on michael.ho@spencer-ogden.com / +61 8 6280 2409.
Your new companyWork with a specialist engineering and cost management consultancy focused on delivering economical designs aligned with current market conditions and construction methodologies. Work with a company that is focused on giving their people the freedom and flexibility to make their own decisions, whether this is in their daily work or for progressing their career.Your new roleWith a huge pipeline of work, they are looking to develop their team with the addition of both Intermediate and Senior Structural Engineers. Through many years of working within the Perth construction industry, they have developed strong relationships with a broad network of sub-contractors. They are unique in their approach to designing as they consider the cost of their designs as one of the key priorities. What you'll need to succeed A Bachelor's Degree (Engineering) or Equivalent.Typically 4+ years' experience in structural design.Strong experience in the design of residential and commercial facilities, buildings, and structures.Previous experience working in a similar roleProblem-solving mindset What you need to do nowIf you're interested in this role, please contact Armand at (08) 6280 2418 or put forward an up-to-date CV to armand.ruba@spencer-ogden.com
About the role:As a Principal member of the team, you will develop strategic client relationships, actively contributing to the development and winning of proposals for a range of clients across government, transport, mining and minerals, and renewable energy sectors.You will be empowered to lead and run your own projects, driving your career forward, working in an international consultancy. Joining this team means joining a team of industry leaders who pride ourselves on the delivery of water resources projects, particularly in the areas of flood impact assessment, hydrological and hydraulic modelling, drainage design, mine water management and stormwater management.In addition, their multidisciplinary team of water resource experts are at the forefront of digital solutions, including the use of numerical modelling, Geographic Information Systems (GIS), machine learning and drone technology to support a range of projects including flood studies, infrastructure design, water quality assessment and geomorphic assessment.You'll joining a company who is well known in the industry for pioneering new technologies and providing innovative solutions to some of the most interesting projects across the Victorian Region. About you: A highly qualified and relevant professional possessing impressive exposure to the consulting environment with strong leadership experienceProficiency in a range of water resource skills including hydraulic design, floodplain management, water quality assessments, stormwater quality management, mine water management, geomorphologic assessment, water balance, hydrological assessments, dam safety inspections and drainage.Proven task and project management skills and proficiency in report writing.Interest in mentoring, developing and managing teamsWorking knowledge of the Victorian and Australian legislations, standards and guidelines as they relate to the water sectorFluent communicator with vast experience in client engagement and management QualificationsTertiary Qualifications in a relevant Engineering discipline, Water Resource Management or Environmental Science/Hydrology - essentialChartership/RPEQ/CPEng – highly regarded.
One of my clients is looking for a geotechnical engineer/engineering geologist to support them in providing ground investigation and geotechnical consultancy services to the property and construction industries. This role is being offered on an initial 6-month contract basis, after which contract extensions or permanent employment would both be considered.Requirements BSc in Engineering Geology, Geotechnical Engineering or similarMSc preferred but not essentialGI site experience of 2+ years (including soil logging)Experience in interpretative report writingExperience with contaminated land would be advantageous but not essentialStrong interpersonal and communication skills If you are interested in knowing more, please send your CV to ananya.modi@spencer-ogden.com and I will be in touch.
We are working with a major Infrastructure client, who are urgently seeking Geotechnical Engineers across the UK.Requirements: 2+ years industry experience minimum Previous experiences on projects as a Geotechnical Engineer/Engineering Geologist Experience in skills such as piling, grouting, meshing, soil nailing, drilling and waterproofingExperience with ground anchoring is an advantage Contract details: Locations across the UK12 month initial contract duration renewableStart date Jan/Feb/March (flexible)Site-based roleRate - Competitive
We have established a partnership with a leading ENR (Engineering News-Record) organization that is actively searching for a highly skilled Transportation Practice Lead/Senior Project Manager in Texas. This exciting opportunity is perfect for a candidate who is eager to assume greater responsibilities, including managing projects for TXDot (Texas Department of Transportation), providing mentorship to junior engineers, and contributing to the firm's growth.As the Transportation Practice Lead/Senior PM, you will directly report to the Vice President of the North Texas region. Your primary focus will involve fostering strong relationships with transportation clients throughout Texas. It is worth noting that this firm has received recognition as a Top 100 Design firm with a prominent presence in the United States for over 40 years, the organization currently boasts an extensive network of 50 offices across the nation, with 4 in Texas (Austin, Dallas, Fort Worth, Houston). If you are seeking an opportunity to lead transportation projects, mentor talented engineers, and play a pivotal role in a renowned engineering firm's expansion across Texas, this position offers an ideal platform for professional growth and development. Requirements: Professional Engineering License10+ years experience in managing design projects in Roadway/Highway/Bridge Ability to lead projects and a design team Should you be interested please apply directly and a consutlant will get in touch with you.
Location: Singapore, Kallang Duration: 1 year contract Position of: Draftsman Scope of Responsibility includes: - • Responsible in designing, coordination, and preparation of specification and plans and to liaise with Project Managers and Engineers for drawings and submission approval • To develop & coordinate technical drawings (mechanical) for submission, tender & construction • To prepared detailed shop drawing and as built drawing • Review and verify drawings to ensure compliance with design specifications and guidelines • Able to multi-task Requirement: • Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor’s Degree, Post Graduate Diploma, others or equivalent • Proficient in AutoCAD 2D & 3D • At least 4 year(s) of working experience in the related field is required for this position • Preferably candidates from mechanical/electrical background • Good command of English language, both spoken and written • Independent, resulted-oriented and self-driven team player with good communication skills • Possess excellent team spirit Interested applicants please send CV to krystal.kow@spencer-ogden.com
Position of: Electrical, Instrumentation & Control Manager Scope of Responsibility includes: - • Establishing electrical operation concept, schematic drawings for HV panels, LV MCC & LV DB’s from single line diagram • Good understanding of 66/11kv, 115/11kv, 22/11kv switchgears, control panel and metering panels • Reviewing of offers/drawings for technical compliance, preparation of instrumentation I/O list, cable sizing & termination schedule preparation. Co-ordination with suppliers on design approvals and FAT & SAT • Supervision of installation, erection, testing and commissioning sub-contractors. Co-ordinate with customers to make changes related with approval drawings. • Pre-commissioning testing of various protection relays of Generator, Transformer, Motor & Feeder Protection of ABB, Schneider, Areva, GE, Reyrolle, Siemens make with following functions. • Trouble shooting and maintenance of all kinds of field instruments which are related to DCS & SCADA system • Provides technical, trouble shooting and maintenance support to all electrical equipment and instrumentation, including low/medium/high voltage substations, switchgear, transformers, motors, distribution systems and associated protection and support equipment. • Testing of Current, Voltage & Power transformers, MV/HV/LV circuit breakers, and Control & Protections schemes with complicated interlocking schemes. • Develop engineering capabilities and work with sales team on project proposal and bidding • Preferably with knowledge in Diesel Generator, Control Panel modification, commissioning and testing. Knowledge in Water Treatment System, Boiler, Turbine, Fuel Handling System, Fuel Preparation System is an added advantage. Requirements • Degree in Science in electrical engineering with emphasis on power systems • Min. 5 years of working experience in renewables, power generation, power systems design or similar field. • PE Certificate is an added advantage • Ability to perform detail-oriented, critical reviews of technical documentation • Ability to work in a fast-paced start-up environment • Strong analytical and trouble shooting skills • Ability to write technical reports in English and proficient in MS Office • Quality, Health, Safety and Environment (QHSE) mindset • Travelling/Site stationed is required Interested applicants please send CV to krystal.kow@spencer-ogden.com
One of my clients is looking for a new geotechnical project manager to join their team on an initial 6-month contract. This project manager will be working on a number of projects in Scotland, as well as the North of England and the Midlands. The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope, and leading a team in order to achieve this. They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members. Responsibilities Leading and managing project teams to achieve necessary targets, through provision of operational, strategic and contractual directionCoaching and supporting other project team members with assigned tasksProblem solving and innovative thinking whilst reviewing activity plansEffective communicating with relevant stakeholders and team members on project progressAcquiring, preparing and reviewing tenders, with a focus on planning, methodology and designSetting an example and promotion of strong HSQEThis role involves frequent travel to various sites under the project manager's remit Desired Qualifications Bachelor's Degree in Civil or Geotechnical Engineering (or equivalent experience)Experience in site-based geotechnical engineering in some (or all) of the following: piling, soil nailing, ground anchoring, slope stabilisation and grouting)Previous experience in the planning and delivery of large-scale infrastructure projectsWork-winning/tendering mentality, with loose estimating abilitiesStrong interpersonal and client skills If this opportunity sounds of interest, please get in touch with me at ananya.modi@spencer-ogden.com to learn more about the role.