Electrical Engineer LV/MV
- Location: Amsterdam
- Salary: Market related
Multiple live roles in Netherlands (Rotterdam, Geleen, Meerssen & Ranstad region).
Looking for Dutch speaking Engineers, who are interested in exciting opportunities.
Responsibilities vary with each role.
If interested and keen to hear more about these roles, contact me on hubert.derexbriggs@spencer-ogden.com.
The ideal candidate for Senior Electrical Engineer will be responsible as the Technical Support Engineer to facilitate asset reliability and ensures uptime of the vessels; in line with the Company's key business goal. Provide drilling fleet technical supportAssist and lead on technical downtime issuesLiaise with OEM'sInvolved with annual equipment inspectionReview vendor quotations and costings for major equipment repair. Prepare overhaul work-scope for major equipment to ensure OEM correct and accurate pricings on repairs and overhaulsPrepare repair work-scope for capital equipment (5 yearly)Regularly review, development and updating of the planned maintenance system (Star) for electrical equipmentTravel offshore to assist in technical problem solving, repairs & troubleshooting as requiredAssist with annual budget preparation for capital equipment expendituresAssist with and ensure compliance of TMOC procedureAttend equipment D&I/commissioning at vendor facilityAssist with client related technical issuesCarry out rig internal technical auditsAssist Projects/Newbuilds EngineersAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all electrical rig systems and controls fleet wideBe prepared to travel worldwide at short notice as and when required Candidate should fulfil the following: Preferably a Degree in Engineering (Hons) in Electrical & ElectronicsMinimum 10 years of experience holding the role of technical support and/or project engineering in O&G industryTrained in the following: LTI Driller/ Draw works Control Course; LTI Top Drive Control Course; Advance Siemens PLC STEP 7 Programming Course; Siemens & ABB VFD Course; Siemens PLC STEP 7 Programming Course; TDS- 8SA Top Drive Course; C++ Programming; MD Totco Drilling Instrumentation Course; Ex Certified; NOV Amphion Control System; HVAC CertificateExperience in offshore drilling or upstream industry with hands-on experience in drilling systems is a plusHighly skilled and efficient trouble shooter
My client are currently looking for an experienced grid engineer to join their established team in Dublin. The client is one of Europe's most experienced wind energy developers and has successfully developed renewables projects with over 3,500MW of rated capacity to date. Specific Responsbilities: To work closely connected both with the project development teams in Ireland and Germany· Interacting with grid regulation authorities and grid operators in their role as project stakeholders.· Providing input for Pre-feasibility studies and technical risk assessment.· Developing and optimising grid connection solutions for wind, solar and energy storage projects.· Seeking alternative network access solutions based on grid studies, including technical, legal and commercial evaluations.· Representing the client on industry grid policy committees / working groups, applying learnings from these forums and providing regulatory advice to the strategic aims of the company in both jurisdictions.· Preparing grid applications and managing the grid application process.· Supporting project tendering and acquisition processes by creating technical documents and checking documents issued by others. To work closely connected both with the project execution teams in Dublin and Wiesbaden offices· Preparing requests for quotation for engineering, construction, procurement and testing of the electrical balance of plant for renewable and / or sustainable energy projects.· Creating, checking and or reviewing technical documents according to our company wide workflow procedure.· Preparing inspection and test plans and supervising construction work.· Controlling electrical project construction costs and project variations.· Carrying out tasks / projects assigned by the Electrical Department in Germany and other ad hoc projects as required by the Director of the Dublin office.
As an I&C engineer, work with a team of I&C engineers and designers, and other disciplines, to perform detail engineering, including front-end planning work, develop I&C quantities and cost estimation, conduct conceptual studies, perform technical quality reviews, attend Factory Acceptance Testing (FAT), and support construction & commissioning activities . Work under a direct supervision of an I&C lead or work independently on smaller projects or standalone activities. Knowledge of instrumentation and control systems (PLC/DCS) is required.Prepare instruments and control system specifications, instrument inquiry/bid packages, technical bid summaries, and purchase recommendations.Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.Participate in the development of P&ID's and equipment/construction subcontract package specifications.Develop instrument index, I/O list, cause & effect and logic diagrams, and control narratives.Work with the India I&C team and other disciplines to produce I&C engineering and design deliverables.Work with clients and vendors for information required to complete engineering design deliverables on schedule and building long working relationship.Interface and support construction personnel directly from the office and support construction and pre-commissioning activities in the field, as required.Work with SmartPlant Instrumentation (SPI) and other smart tools to produce engineering and design deliverables.Able to support construction and startup & commission activities in the field, as required Requirements: Bachelor's degree in Electrical Engineering, Mechanical Engineering or Chemical Engineering from accredited program required.Engineer-In-Training (EIT) Certification recommended.3 years related experience. Completion of master's degree in related field may be substituted for one year of experience. Strong analytical and problem-solving skills.Attention to detail.Ability to clearly communicate both verbal and written technical information.Must be proficient in the use of computer software (i.e., MS-Word, Excel, PowerPoint, Access).Valid driver's license required. Must be willing and able to obtain, or currently hold a valid Transportation Worker Identification Credential (TWIC).
Responsibilities Assist process engineering design and coordinate process engineering deliverables with Engineering firm Including, but not limited to: Review vendor equipment approval drawings with focus on interface management between vendorsReview/approve PIDs generatedReview/approve PFDs generatedReview/approve Area Process Narratives/Functional descriptionsReview/approve Equipment specificationsReview/Approve Instrumentation specificationsReview/approve project Basis of Technical DesignReview/approve mass and energy balancesPerform project engineering role with focus on schedule and on facilitating clear communication between the various stakeholders on technical barriers to design advancement.Support construction efforts by answering technical questions and providing quality control oversight on installation and startupAssist with equipment layout developmentProvide technical assistance to procurement and project management with equipment bidding process, including package documentation, bidding, Total Cost of Ownership (TCO)s and bid comparisons. Generate project mass and energy balancesReview and provide feedback on equipment, line, valve, specialty item and instrumentation lists generated by Engineering firm.Ensure project compliance with engineering and equipment standardsApply process safety management (PSM) experience to assist with items such as management of change (MOC) and pre-start up safety reviews (PSSR).Interface effectively with commercial, safety, accounting, legal, environmental, engineering, QA/QC, process safety management, and procurement to assist with project needs.Develop plans for commissioning/start-up and assist in executing same. Education/Experience/Skills Required Bachelor’s degree in Engineering or applicable related field.5 to 10 year total industry experienceMinimum of 5 years experience with field work or operations or constructionMinimum of 5 years experience working with Process Safety principlesExperienced in using TEAMS, Microsoft Word, Microsoft Excel, Visio and PowerPointExperienced in using Navisworks 3D viewing softwareBuilds Shared Vision
Job Decriptions Provide reservoir engineering expertise, including expertise in field development planning, reservoir modeling/simulation, economic evaluation, feasibility studies, and due diligence.Expertise in conducting reservoir engineering analysis and economic evaluation utilising technical and economic software packages (Petrel, Eclipse) or industry-equivalent software packages. Assess and evaluate option to optimise production and recovery utilising data acquisition, interpretation, and analysis as well as techniques such as static and dynamic model utilising reservoir simulation software, well test interpretation, reservoir surveillance (KAPPA Suite, OFM, etc.), and well performance modelling. Contribute to the evaluation, classification, and audit of reserves and resources in accordance with the SPE Petroleum Reserves Definitions.Collaborate with multidisciplinary teams to identify, execute, and optimise well performance opportunities.Supervise and provide direction for drilling and field production operations. Requiremnts Technically proficient, with an MSc in reservoir engineering, petroleum engineering, or geosciences. Minimum 8 years of relevant practical experience in Geomodelling/Reservoir engineering from an E&P company and/or oilfield services company, with proficient skills in using Petrel and flow simulators like ECLIPSE and similar tools.Curious, self-driven, willing to learn and share knowledgeStructured, analytical, and proactive approach to solving business problems and client challenges. Energetic team player, willing to travel. Programming skills such as Python are desirable.Proficient in English (written & spoken).-Malaysian only / Right to work in Malaysia.
Bachelor’s degree in Engineering in Petroleum / Mechanical / Process or equivalent.10 years’ experience in well services / petroleum engineering and operations.Broad knowledge / engineering expertise in all related disciplines in well completion such as geology, reservoir, drilling, production, etc.Ability to integrate and communicate with specialists of corresponding disciplines.
Job Description: Primary responsibility of the position is to act as a project engineer and project support engineer for capital projects to ensure proper measurement design and mechanical design.Provide technical expertise in measurement equipment (Ultrasonic meters, Coriolis meters, Orifice meters, Gas Chromatograph, fuel meters, H2O Analyzer, H2S Analyzer, O2 Analyzer, CO2 Analyzer and Hydro Carbon Dew point Analyzer) with capital project execution with support on installation, diagnostic, configuration and troubleshooting of said equipment.The engineer frequently coordinates with other internal departments including; within our own MR&C engineering, pipeline engineering, storage and compression engineering, Operations, Supply Chain, Project Management, Project Controls, Customer Account Managers, Customer Deliverability, Operational Technology, Gas Control and many others.As a project engineer, the individual's responsibilities include, but may not be limited to the following: 50% Project scoping, design engineering and design review/support30% Equipment/material procurement and Construction coordination/support10% Equipment specification and development of department standards10% Field/O&M technical support Basic Skills/Requirements: Excellent communication skills (both verbal and written)Technical writing experience in writing engineering specificationsAbility to work on a team with diverse experiences and responsibilitiesProject Engineering ExperienceAbility to access, diagnose, and close gaps in process and projects (problem solver) Skills: The following skills and experience will set you apart from others: Familiarity with Michigan Gas Safety Code Masters or other advanced degree, ideally in a technical or scientific field of study Energy industry background that includes natural gas chromatography and metering equipment Knowledge gas measurement equipment and electronic flow measurementKnowledge of codes such as AGA, API, PHMSA, and gas measurement codesProfessional Engineering (PE) licenseComputer software and programs: microsoft office suite, SAP, Arriba, Measurement software Education: Bachelor's Degree in Engineering field - Mechanical preferred.
At least 10 years E&P industry experience (Operator Background)Operations and maintenance experience, front end engineering exposure, prior experience in managing partnerPrimary Functions/Responsibilities: Responsible in ensuring Company's interest is protected in the assets.Responsible in monitoring and analysis of production and operational aspects of Partner Operated Assets.Responsible in developing performance and production input and regulatory reporting.Responsible for all operational and production issues, including project related activities that impact operations and production.Developing and maintaining strong working relationships with partners and the other upstream operators in Malaysia.Support achievement of production goals through the management of downtime and operating efficiency.Influence the operators' management of costs. Only Malaysians will be considered
The ideal candidate for Senior Mechanical Engineer will be responsible to lead the planning, execution, monitoring and control of the maintenance of assets; in line with the Company's key business goal. Provide daily technical support to rigs under remitAssist with technical downtime issuesLiaise with OEM's as requiredTravel offshore to assist in technical problem solving and troubleshooting as requiredAssist with technical audit function in relation to maintenance and technical proceduresAssist with PM development as requiredAssist with annual budget preparationAssist with offshore minor projects and rig modificationsAssist rigs in follow up to ensure compliance with Technical MOC procedureAssist with follow up on onshore equipment repairs as requiredAssist with client related technical issuesCarry out rig familiarisation visitsAssist with Project Engineers when requiredAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all rig mechanical systems and controls fleet wideBe prepared to travel worldwide at short notice when requiredLead safety by example for all employees to followPromote safety awareness and safe work practice among all the personnelReport all hazards and positively intervene in all observed unsafe actsParticipate in emergency drills, including post-drill debriefs Candidate should fulfil the following: Preferably a degree in Bachelor of Engineering (Hons) in Mechanical and minimum 5 years' experience in technical support and or project engineeringFamiliar with computerised control systemsExperience on /with Offshore Drill Rigs and Rig equipment and TroubleshootingSound knowledge of rotating equipmentSound knowledge of hydraulic controls and systemsTrained in Mechanical trade or engineering degree
We have an immediate opening for a sr. IT Industrial System Engineer based at The Hague, Netherlands office The sr. IT Industrial System Engineer is responsible for developing the detailed technical configurations required to ensure that the many and varied plant floor computing platforms operate in a reliable manner and integrate seamlessly with each other and with the enterprise computing environment. The position provides information technology support and ensures continued operation of the systems, processes, and technologies that comprise our clients' Industrial Control Systems. The candidate will need strong IT infrastructure skills including network, client, server, and security.Plant floor computing requires a broad variety of operating systems, software applications and communication protocol alternatives. These systems must communicate with various electronic devices and together they form the core of plant automation. The blend of IT and non-IT components present technical challenges that must be considered in the design. What you'll do: Primary role will represent IT Plant Computing Engineering efforts on new capital projects (> $0.5 Billion USD) located in Uzbekistan and in various port locations throughout Europe based on project demands. This person will be embedded in the day-to-day design efforts and work closely with our clients' Engineering centers in the UK and India. This role will require travel within Europe and Central Asia as part of these new facility IT infrastructure deployments.Work with Process Automation Engineers to build and deploy control systems for new plant projects or control system upgrade projects. Participate in Industrial Control System cybersecurity assessments and deployments.Configure and install PCs and Servers for Process Control Applications.Provide first level incident response for Process Control PCs and Servers.Develop Zone & Conduit Diagrams and Perdue Enterprise Reference Architecture models for Process Control Systems.Develop, design, configure and deploy Plant Floor applications for malware, antivirus, disaster recovery, safelisting, asset management, remote access, intrusion detection and various other layer of protection for OT assets.Work with vendors and follow industry best practices for proper infrastructure support.Optimize work processes and implement automation to drive service efficiency and productivity.Help train, orient, bring up to speed new team members.Travel to our clients' plant sites, spend minimum of 25% of your time travelling.Participate in on-call support rotation, including evenings and weekends per rotation schedule. What we're looking for:Bachelor's degree in Information Technology, Computer Science, or equivalent work experience.15+ years IT experience or comparable experience with process control systemsExperience with Windows PC Operating Systems (Windows 7, Windows 10, Windows 11) and Windows Server Operating Systems (Windows 2016, 2019, 2022)Experience with Symantec Endpoint Protection, Acronis Backup, Netop Remote Control, and McAfee Application safelistingExperience with networks (TCP/IP network protocols, DNS, DHCP), firewalls, and Active DirectoryFluent in IEC 62443, NIST SP-800 and Saudi HCIS (High Commission for Industrial Security) and NCA (National Cybersecurity Authority) a plusISA99/IEC 62443 Cybersecurity Fundamentals Specialist Certificate a plusWillingness to learn and develop security administration skillset Familiarity with industrial control systems like Siemens PCS7,Honeywell, ABB ; Siemens and Honeywell are preferredAbility to manage multiple project priorities and competing demandsGood communication, leadership and teamwork skills are required, including the ability to work independentlyMust be a creative thinker, results oriented, focused, and attentive to detail and accuracyMust be sharp, quick, dedicated and innovative problem solverMust be able to safely handle physical demands of the position, including ability to lift up to 25 pounds, install equipment in tight spaces, and pull wire, cables, and run conduits as needs arise.
We are currently looking for a Technical Support Engineer to support a project in Malaysia. The candidate must have a minimum of 10 years experience and has involved with HPHT project.
We are currently looking for a local Senior Drilling Engineer to support for a Campaign in Malaysia. The candidate requires to have a minimum of 15 years experience in Oil & Gas industry. Extensive offshore exposure on semi-submersible and jack-up drilling vessels including time served as a Sr. Drilling SupervisorGood computer skill (MS office, Landmark, Wellview)