Job details

Location
Singapore
Salary
$6k - 8k per month
Job Type
Contract
Ref
205839
Posted
over 2 years ago

Distributed Control System Engineer (DCS)

  • Start: October 2021 (Slightly flexible)
  • Location: Singapore, East
  • Contract Duration: 6 Months (Possible Extension/Renewal)
  • Working hours: Office Hours
  • Scope: Mainly in-house engineering, FAT Support, Loop Checking etc. Other related tasks as assigned

Requirements

  • At least 2 Years of Experience on Honeywell Experion
  • Candidates with other relevant experience may be considered

Apply through this portal or

Email you application with the title 'SG Honeywell DCS Engineer_Name" to baharath.kahlaichelvem@spencer-ogden.com

Similar jobs.

View all
Renewable Energy Careers

I/C Elecrical Engineer

  • TypeContract
  • Salary$0 per year
  • LocationBasking Ridge

  Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation.  Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following:  Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required  Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times  Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English.  Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.

Power Generation Careers

Project Engineer

  • TypeContract
  • SalaryMarket related
  • LocationSingapore

Spencer Ogden is currently seeking an experienced Project Engineer to support a water reclaimation plant project in Singapore on a 12 month contract basis to lead and coordinate all engineering activities for assignments starting from Mid February 2024.Contract Details: Start Date: As soon as possibleContract Duration: 12 months from start date with potential for extension.Working Schedule: 5 days a week, 8 hours a day (Mon - Fri)Location: Singapore - Occasional travel to site Main Responsibilites: Site Support: Supporting the lead engineer, provide technical support, documentation, system setupDocumentation and reports: Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed. Requirements: At least 3 years’ experience in DCS project engineering and/or DCS serviceKnowledge and experience in 800xA is an added advantageMinimum with recognized degree or Diploma in Engineering with experience in automation systemsComputer literacy and competency Microsoft office tools.Strong interpersonal, organizational and communication skills.

Renewable Energy Careers

Electrical Engineer

  • TypeContract
  • Salary$0 per year
  • LocationKnoxville

Job DetailsDescription We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits.  Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.Electrical Engineer with an emphasis on power generation. Multi-discipline projects in hydro, gas and fossil power generating facility experience is required. Duke, TVA, Exelon, Dominion or other power industry experience is desired. Desired experience includes low voltage and medium voltage power distribution, motor controls for both low voltage and medium voltage, interfacing industrial processes to DCS and/or PLC systems and the use of power distribution system modeling software (ETAP or similar). Need to be familiar with panel design, and 3D environment.Candidate needs to be a leader, capable of coordinating engineering and design efforts, working within a team, and comfortable being in front of peers and clients leading/conducting meetings.  At times job duties will require coordinating with project managers, and client to develop proposal documents and estimates to facilitate bidding on work. Work will mostly center around modifications and upgrades in existing facilities. Experience in relay protection would be a plus.Travel RequiredYes. Occasional one or two day site visits.QualificationsSkillsRequiredElectrical EngineeringIntermediateBehaviorsRequiredTeam Player: Works well as a member of a groupLeader: Inspires teammates to follow themDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellDedicated: Devoted to a task or purpose with loyalty or integrityMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsSelf-Starter: Inspired to perform without outside helpEducationRequiredBachelors or better in Engineering.ExperienceRequired4-10 years: 4-10 years of progressive experienceLicenses & CertificationsPreferredProf Engineering (PE)

Power Generation Careers

PLC programmer

  • TypeContract
  • SalaryMarket related
  • LocationSingapore

Spencer Ogden is currently seeking an experienced PLC Programmer to support a water reclaimation plant project in Singapore on a 12 month contract basis to lead and coordinate all engineering activities for assignments starting from Mid February 2024.Contract Details: Start Date: As soon as possibleContract Duration: 12 months from start date with potential for extension.Working Schedule: 5 days a week, 8 hours a day (Mon - Fri)Location: Singapore - Occasional travel to site Main Responsibilites: Site Support: Supporting the lead engineer, provide technical support, documentation, system setup and programming PLC SystemsDocumentation and reports: Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed. Requirements: At least 3 years’ experience in DCS project engineering and/or DCS serviceKnowledge and experience in 800xA is an added advantageMinimum with recognized degree or Diploma in Engineering with experience in automation systemsComputer literacy and competency Microsoft office tools.Strong interpersonal, organizational and communication skills.

Infrastructure Careers

Project Engineer // Civil Engineering

  • TypeContract
  • Salary£51 per hour
  • LocationErlangen

As a project engineer for construction, you will be an integral part of the project team to bring my client "Transformation of Energy" projects to a successful project completion. These are international Engineering, Procurement and Construction (EPC) projects for High Voltage Alternate / Direct Current projects (HVAC and HVDC), combined cycle power plants (CCGT), hydrogen projects (H2) and hybrid solutions.You will shape the future of the client in technical interactions within your project with external partners (customers, engineering firms, authorities, construction companies, etc.) as well as with your internal partners (building technology, project management, purchasing, etc.)You will prepare tender documents for construction and engineering services and lead the technical award negotiations up to the conclusion of the contractYou will coordinate the entire construction planning and ensure that the requirements of the customer and the technology are considered.You will coordinate and manage all contractors involved in the constructionYou will monitor and be responsible for the deadlines, costs and quality of the entire construction processQualifications:- University or technical college degree in the field of civil engineering, ideally completed semester abroad or internships abroad- Several years of relevant professional experience in industrial and plant engineering. Applications with initial work experience are also welcome.- Good expertise in all areas of civil engineering as well as good handling of MS Office tools, ideally iTwo- Fluent in German and English as well as ideally knowledge of other languages (French, Italian, Spanish)- Ability to work in a team, assertiveness, initiative, communication skills as well as planning and organizational skills- Willingness to travel worldwide 

Renewable Energy Careers

Engineer II

  • TypePermanent
  • SalaryMarket related
  • LocationMadison

We are currently seeking a self-motivated and passionate Electrical Engineer to join our team. In this role, you will serve as the engineering support for our Distribution System Operations (DSO) department, contributing to the growth of this exciting engineering field. We are in search of candidates ready to take on influential roles within our team. Ideal candidates will have a background in electrical engineering.This is a hybrid-remote position, reporting to either our Cedar Rapids, IA or Madison, WI office. Candidates must be residents of Iowa or Wisconsin.What You Will Do: Collaborate with engineering and operations teams to plan, implement, and support distribution grid programs, projects, and initiatives using various platforms, including: SCADA (Supervisory Control and Data Acquisition)ADMS (Advanced Distribution Management System)OMS (Outage Management System)DERMS (Distributed Energy Resources Management System)FLISR (Fault Location, Isolation, and Service Restoration)VVO/VVC (Volt-VAR Optimization and Volt-VAR Control) Work with internal and external stakeholders to develop recommendations for enhancing operating tools, situational awareness, and overall distribution system performance and reliability. Collaborate with field operations, engineering, IT, and transmission partners to provide long-term grid operations support, including electric and gas distribution system strategy, analysis, implementation, operation, and maintenance of complex technology systems. Maintain the data necessary for ADMS, DERMS, and other power system platforms. Collaborate with cross-functional teams to rectify errors between systems and provide feedback on recurring issues for new project analysis and scoping. Develop an understanding of customer needs and expectations and propose solutions for moderately complex issues. Participate in identifying and solving problems within the assigned area of responsibility with guidance from a supervisor. Apply governmental and organizational engineering standards, interpret policies, and exercise discretion and judgment in resolving moderately complex problems. Demonstrate critical thinking and communication skills necessary for developing recommendations that offer technically sound and cost-effective solutions to specific problems. Education Requirements: A Bachelor's Degree in an engineering program accredited through the Engineering Accreditation Commission is required. A Bachelor of Science in Electrical Engineering degree is preferred. Required Experience: 2+ years of related engineering experience.

Power Generation Careers

Engineering Manager

  • TypePermanent
  • Salary$0 - 170k per year
  • LocationPittsburgh

ESSENTIAL FUNCTIONS Lead engineering staff and external suppliers according to Company policies and procedures to effectively achieve Company and department objectives. Develop employees by training, cross training, and providing continuing education opportunities. Conduct performance reviews and provide input for salary decisions.Develop engineering designs and related system drawings for applications and project installations including the development of specifications for hardware and software.Lead supplier and sourcing efforts of the division including product development, design and acceptance testing to ensure the division a consistently competitive and compete line of display products.Act as primary liaison between the Division and overseas factory on product and system related matters.Develop and maintain factory acceptance testing of all product orders to ensure delivery within Company's specification and standards. Ensure engineer staff are properly trained and certified on quality procedures.Identify and present recommendations for improvement or change in strategy, policy, product and/or procedures, including those related to product development and product launch.Create and maintain bill of materials (BOMs) and production documentation for projects and Company's manufactured assemblies and subassemblies within the Syteline system.Create, implement and maintain product and technical training for DVD personnel. Maintain and manage the testing, training and customer demonstration facility for the Division.Manage engineering resources to provide on-site engineering and commissioning of new display systems and on-site engineering support.Provide engineering resources to assist with advanced product service support and resolution of warranty issues to meet the Division's customer commitments.Manage the Division's parts repair and depot service including inventory management, policies and processes.Lead the Division's quality efforts including the management of the Quality Reporting System (QRS) and maintenance of quality policies and procedures.Collaborate with the General Manager and other departments on the development of go-to-market strategies for new product launches.Further the goals and positive, professional image of the Diamond Vision Department by assisting in the creation of marketing materials, plans, and strategies. QUALIFICATIONS Bachelor's Degree in Electrical, Electronic Technology, or Computer Engineering, with a minimum 10 years of relevant large-scale video systems experience and a minimum 5 years of management experience, or equivalent education and experience.Advanced knowledge of large-scale video systems, video production systems, video/computer display systems.Intermediate knowledge of commercial, structural and electrical construction techniques.Advanced analytical and problem-solving skills.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and vendors.Ability to work in a team environment and on several projects simultaneously.Ability to read, understand, and create technical drawings and materialAdvanced computer experience with emphasis on Microsoft Office applications and computer aided drafting software.

Power Generation Careers

Protection Engineer

  • TypeContract
  • Salary$0 per year
  • LocationKnoxville

 Electrical Engineer with an emphasis on generation station protective relaying. Position will be responsible for the design and engineering for generation station relay replacements/retrofits and new installations. Must be eligible to get PE licensed.Desired experience includes: Proficiency in relay settings and calculations for generator, transformer, motor, feeder, and bus protection schemes with a focus on SEL, Beckwith and GE relays.Familiar with SEL, Beckwith and GE relay manufacturer softwareDesigning and reviewing drawings, including one-line diagrams, AC/DC schematics and wiring diagrams.Perform protective device coordination from 480V to 500kV relaysPerform NERC PRC evaluations and reviews (E.g., PRC-025, PRC-019)ETAP/SKM or other system analysis software knowledge.Field Testing and Commissioning is a plus (Relay testing, function trip path testing, troubleshooting, etc.)Writing test and checkout procedures.Specifying equipment such as protective relays, test switches, aux relays, CT/PTs, etc.Familiar with IEEE standards Travel RequiredYes. One or two day site visits. Occasionally provide commissioning support.QualificationsSkillsRequiredElectrical EngineerAdvancedBehaviorsRequiredDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellTeam Player: Works well as a member of a groupDedicated: Devoted to a task or purpose with loyalty or integrityLeader: Inspires teammates to follow themMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksSelf-Starter: Inspired to perform without outside helpPreferredFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsEducationRequiredBachelors or better in Electrical Engineering.ExperienceRequired5 years: 5 + years of progressive experience as a protection engineerLicenses & CertificationsPreferredProf Engineering (PE)

Renewable Energy Careers

Solar Electrical Engineer

  • TypeContract
  • Salary$55 - 65 per hour
  • LocationFresno

Essential Functions: Design electrical infrastructure for photovoltaic systems, incorporating electrical engineering knowledge, solar photovoltaic system design principles, and industry best practices.Develop construction documents based on customer requirements, engineering decision-making, and compliance with NEC and CEC codes.Address comments from the Authority Having Jurisdiction (AHJ) during the permit review process, following company SOPs, to facilitate timely issuance of building permits.Conduct technical reviews of system components and ancillary devices to ensure compliance with design specifications.Provide prompt responses to Requests for Information (RFI) from field installation personnel, in accordance with company SOPs.Review testing data from internal field personnel and third-party testing agencies to ensure product quality.Provide engineering guidance and internal training to the company upon request.Support other departments with electrical questions and problem-solving throughout the construction process.Perform other assigned duties as required. Knowledge, Skills, and Experience: Required: Strong verbal and written communication skills in English.Ability to multitask and manage multiple projects simultaneously.1-3 years of design or engineering experience related to renewable energy.Proficiency in AutoCAD.Proficient in MS Office.Knowledge of photovoltaic systems, NEC requirements, and construction practices.Effective prioritization and task execution in a high-pressure environment.Willingness to learn and apply new technologies.Valid driver's license.Bachelor's degree in Mechanical Engineering or Electrical Engineering. Preferred: Proficiency in PVSyst.Master's degree in Mechanical Engineering, Electrical Engineering, or related discipline.EIT Certification.

Renewable Energy Careers

Grid Engineer

  • TypePermanent
  • SalaryMarket related
  • LocationDublin

My client are currently looking for an experienced grid engineer to join their established team in Dublin. The client is one of Europe's most experienced wind energy developers and has successfully developed renewables projects with over 3,500MW of rated capacity to date.  Specific Responsbilities: To work closely connected both with the project development teams in Ireland and Germany·        Interacting with grid regulation authorities and grid operators in their role as project stakeholders.·        Providing input for Pre-feasibility studies and technical risk assessment.·        Developing and optimising grid connection solutions for wind, solar and energy storage projects.·        Seeking alternative network access solutions based on grid studies, including technical, legal and commercial evaluations.·        Representing the client on industry grid policy committees / working groups, applying learnings from these forums and providing regulatory advice to the strategic aims of the company in both jurisdictions.·        Preparing grid applications and managing the grid application process.·        Supporting project tendering and acquisition processes by creating technical documents and checking documents issued by others. To work closely connected both with the project execution teams in Dublin and Wiesbaden offices·        Preparing requests for quotation for engineering, construction, procurement and testing of the electrical balance of plant for renewable and / or sustainable energy projects.·        Creating, checking and or reviewing technical documents according to our company wide workflow procedure.·        Preparing inspection and test plans and supervising construction work.·        Controlling electrical project construction costs and project variations.·        Carrying out tasks / projects assigned by the Electrical Department in Germany and other ad hoc projects as required by the Director of the Dublin office.

Power Generation Careers

Commissioning Engineer

  • TypeContract
  • Salary$75 per hour
  • LocationTexas

Electrical Testing & Commissioning Specialist is responsible for directing commissioning and testing activities in the field. This position is responsible for providing commissioning and testing solutions. Prepare and recommend testing & commissioning solutions to the Project Manager or client.  Delivers solutions to Project Manager or Senior Engineer to address future client needs and provide cost analysis on testing solutions.  Ensures the performance of all field testing on substation equipment is completed accurately and safely.  Performs demonstration tests, as required, which are a series of functional tests designed to simulate real world conditions to ensure proper operation of yard equipment.  Develops and executes substation equipment test procedures.  Provide technical instruction, mentoring, guidance with regard to substation systems and electrical power systems to field testing technicians.  Develop testing & commissioning departmental and project requirements.  Ensure compliance of testing QA/QC process.  Regularly meet and correspond with clients and outside personnel with responsibility to act independently on technical matters related to testing & commissioning.  Manages marketing efforts for key pursuits.  Consults with clients on testing and commissioning projects.  Maintains client relationships with client field personnel.  Other duties as assigned.  

Power Generation Careers

Electrical Engineer - Substation

  • TypeContract
  • SalaryMarket related
  • LocationSt Louis

Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. This position can influence the future of the resiliency, reliability and economic operation of the electric grid. Opportunities to advance into leadership roles are available.Position may include leading or executing the following assignments: Preparation of proposals and scope development, including conceptual designs and execution plansPrepare engineering cost and man-hour estimates and schedulesPhysical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of materialProtection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiringPrepare calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.)Prepare equipment specifications for procurement and/or factory acceptance testingCoordinate design activities with other departments (Civil/Structural, Networks, Transmission Line, etc.)Provide guidance and mentoring to less experienced team membersRegularly meet and correspond with clients or outside personnelPerform quality reviews for other engineers and designersProvide short term field support during constructionSupport business development and marketing initiativesOther areas of involvement may include: relay settings, 3D/intelligent design, or industry/professional technical committee involvement Requirements: Bachelor's degree in Electrical Engineering from accredited program Minimum 3 years related experience (completion of master's degree in related field may be substituted for one year of experience)Completion of FE exam strongly preferredProficiency with National Electrical Safety Code and IEEE / ANSI StandardStrong preference for those with: Excellent written & verbal communication skillsStrong analytical and problem-solving skillsCapability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria