SCADA Manager
- Location: Taipei City
- Salary: Market related
1. responsible for the scope of power monitoring system and power SCADA & Protection
2. act as a communication bridge between the owner and suppliers
3. planning and integration of IO points and communication points with other equipment
4. coordinate the interface and scope clarification of suppliers, Assist suppliers to solve problems
At our company, we raise the quality of life around the world by changing the way energy works. Everyone makes an impact every day in our small, global teams. Apply here to start an extraordinary career today. POSITION: Company CE Senior Engineer, SCADA Controls DEPARTMENT: Grid Integration / SCADA & Resource Integration REPORTS TO: Senior Manager, SCADA & Resource Integration LOCATION: Full-time Remote We are currently looking for a dynamic and passionate SCADA Controls & Commissioning Engineer to oversee multiple aspects of the company Execution process for our renewable resource projects (PV, BESS, Wind, Hybrid, etc) including the Controls build-out, NERC Compliance, and hand-off to our Operations team. This person will work with various SCADA vendors, EPCs, equipment manufacturers, utilities, and internal teams to meet all grid integration, NERC, and company operational requirements. This is a great opportunity for someone with Renewable Energy SCADA Controls experience and an understanding of NERC Compliance to strengthen their skills and drive our Clean Energy division to be an industry leader in the renewable sector. The position is remote and requires up to 10% travel to project locations. Principle Duties and Responsibilities: SCADA Controls: Subject Matter Expert for SCADA Control development, commissioning, and testing Thorough understanding of control requirements for each type of project (PV Solar, PV + BESS, Standalone BESS, Wind, etc) and implementation of control logic to achieve required plant operations taking into account requirements from the Off-Taker, Interconnecting Utility, ISO/RTO, and others. When multiple SCADA Vendors are participating in a single project, coordinate all control requirements/responsibilities amongst the various vendors to ensure logic development is understood and coordinated between the various Vendors Understanding of Substation design taking into account static reactive resources within the substation (capacitor/reactor banks) and other devices affecting SCADA controls (i.e. On-Load Tap Changers). Coordinate with SCADA Vendors to ensure control logic meets all grid code requirements (LGIA, PPA, NERC Inverter Based Resource Guidelines, IEEE 2800, etc) Drive coordination with Utilities and ISOs/RTOs to develop SCADA Control logic (both Real and Reactive power controls) that meet local area Grid Code requirements. Serve as the company SME to utilities that may be unfamiliar with Renewable Resources or concerned about their impact to the grid. Drive continuous improvement with various SCADA Vendors with the goal of our company being the industry leader in SCADA controls. Areas of continuous improvement include designing controls per industry recommendations/guidelines (NERC IBR Guidelines, IEEE 2800, lessons learned from Projects, etc) Develop and document company Standards for SCADA Controls and develop SCADA Controls philosophy documents Review and oversee HMI build-out to ensure all applicable pages are available in the HMI, all equipment and associated operations parameters are displayed in a logical/functional way, HMI controls are intuitive, and HMI is consistent amongst projects. Where multiple SCADA Vendors are involved in a project, coordinate various Vendors to ensure all control requirements are accounted for in the HMI. Drive commissioning controls testing and create/obtain documentation showing completion of testing, any required corrective actions, and company final acceptance of test results Review, provide feedback, and act as approver for contractor project deliverable items including: Control test plan/procedure, Controls Narrative, SCADA PPC/MPPC testing reports, and others as required by the SCADA Project Engineer Provide input to project metering design to ensure controls are coordinated with project metering.
Job Description:This is an exciting opportunity to work with a growing renewables team based in the Northeast. They are actively seeking out a BESS engineering expert to take a lead role in the development of their projects. Responsibilities: Lead the design and implementation of renewable generation control system applications for North American projects. Design, implement, and test various components of the renewable generation control system, including overall power plant control for PV Solar and BESS sites based on established PSSE models and ISO/RTO requirements. Develop applications for BESS energy management system. Coordinate asset generation between PV Solar and Battery Energy Storage System (BESS). Design SCADA systems for BESS and PV Solar, ensuring effective communication through industry standard protocols (Modbus, DNP3, etc.). Provide technical support across departments for new project pursuits and product development. Mentor and guide less experienced engineers in renewable control system application design and commissioning. Create and maintain engineering plans and schedules. Support customer Factory Acceptance Test and participate in site commissioning and Site Acceptance Test activities. Identify opportunities for product and process improvements and provide valuable suggestions. Manage time effectively to meet project schedule and commitments. Cultivate and nurture customer relationships. Monitor and track project financial performance. Requirements: Bachelor's degree in Engineering or a related technical discipline. Minimum 9+ years of experience in power generation control system applications, specifically in renewable energy systems, power conversion, energy storage, PV, and/or power systems control. Willingness to travel up to 30% domestically. Legal authorization to work in the United States without sponsorship. Familiarity with UL1973, UL9540, UL9540A, NFPA 855, and NFPA 70E. Experience working with utility-scale battery storage systems preferred.
We are partnered with a utility-scale solar and storage developer in Sydney, seeking an experienced Lead Power Systems Engineer to join their team. In this role you will provide technical leadership and expertise for Solar PV and Energy Storage projects, ensuring successful grid connections and optimising project configurations. This senior position offers project management and leadership responsibilities, presenting an exciting opportunity to shape the future of renewable energy!Key Responsibilities: Collaborate with development colleagues to identify suitable locations for projects using power systems analysis and congestion modeling.Specify high-level design for Solar PV, BESS, and Hybrid projects to optimise configurations.Manage the Connection Application Process (R0) for multiple projects across NEM jurisdictions.Conduct Model Acceptance, Benchmarking, and GPS compliance studies using relevant software packages.Manage relationships with project stakeholders, NSPs, AEMO, contractors, and OEMs.Appoint and manage external power systems consultants for Connection Application Packages.Negotiate optimised connection strategies with NSPs for Solar PV, BESS, and Hybrid projects.Negotiate Generator Performance Standards and technical aspects of Connection Agreements.Develop cost-effective project configurations and connection strategies.Stay informed of industry developments and provide expert guidance to the Elgin Energy team. Qualifications and Skills: Appropriate degree in Electrical/Energy Engineering/HV Power System Engineering or related discipline.5+ years’ experience working in a connections-focused environment within an Engineering Consultancy, Project Developer, NSP, or AEMO.Proven track record of success in progressing wind/solar/BESS connections with NSPs and AEMO.Evidence of working successfully on multiple projects to demanding deadlines.Site experience in Solar PV plants and/or high-voltage substations is desirable but not essential.Strong technical knowledge of the NER Chapter 5 process with a proven track record of success.Excellent knowledge of power systems analysis software packages, including PSS/E, PSCAD, and DigSilent PowerFactory, along with Python automation skills.Knowledge of AC and DC electrical design of Solar PV plants, BESS, and grid connection methodologies.Familiarity with HV electrical equipment, control systems, SCADA, protection, and metering.Ability to manage external consultants for the delivery of design and study packages. If you are driven by innovation, have a passion for the renewable energy space where your contributions will have a meaningful impact, please apply below or email orlagh.fleming@spencer-ogden.com.
We are currently seeking a self-motivated and passionate Electrical Engineer to join our team. In this role, you will serve as the engineering support for our Distribution System Operations (DSO) department, contributing to the growth of this exciting engineering field. We are in search of candidates ready to take on influential roles within our team. Ideal candidates will have a background in electrical engineering.This is a hybrid-remote position, reporting to either our Cedar Rapids, IA or Madison, WI office. Candidates must be residents of Iowa or Wisconsin.What You Will Do: Collaborate with engineering and operations teams to plan, implement, and support distribution grid programs, projects, and initiatives using various platforms, including: SCADA (Supervisory Control and Data Acquisition)ADMS (Advanced Distribution Management System)OMS (Outage Management System)DERMS (Distributed Energy Resources Management System)FLISR (Fault Location, Isolation, and Service Restoration)VVO/VVC (Volt-VAR Optimization and Volt-VAR Control) Work with internal and external stakeholders to develop recommendations for enhancing operating tools, situational awareness, and overall distribution system performance and reliability. Collaborate with field operations, engineering, IT, and transmission partners to provide long-term grid operations support, including electric and gas distribution system strategy, analysis, implementation, operation, and maintenance of complex technology systems. Maintain the data necessary for ADMS, DERMS, and other power system platforms. Collaborate with cross-functional teams to rectify errors between systems and provide feedback on recurring issues for new project analysis and scoping. Develop an understanding of customer needs and expectations and propose solutions for moderately complex issues. Participate in identifying and solving problems within the assigned area of responsibility with guidance from a supervisor. Apply governmental and organizational engineering standards, interpret policies, and exercise discretion and judgment in resolving moderately complex problems. Demonstrate critical thinking and communication skills necessary for developing recommendations that offer technically sound and cost-effective solutions to specific problems. Education Requirements: A Bachelor's Degree in an engineering program accredited through the Engineering Accreditation Commission is required. A Bachelor of Science in Electrical Engineering degree is preferred. Required Experience: 2+ years of related engineering experience.
Job Description:This is an exciting opportunity to work with a growing renewables team based in the Northeast. They are actively seeking out a PV engineering expert to take a lead role in the development of their projects and products. Responsibilities: Serve as the Subject Matter Expert for PV SCADA Control development, commissioning, and testing. Ensure compliance with relevant NERC Standards for PV SCADA and SCADA Control Execution. Lead application design for renewable generation control systems Provide technical support across departments for new project pursuits and product development. Mentor junior engineers in renewable control system application design and commissioning. Prepare and maintain engineering plans and schedules. Identify opportunities for product and process improvements. Foster and maintain strong customer relationships. Monitor project financial performance. Requirements: Bachelor's degree in Engineering or a related technical discipline. 9+ years of experience in power generation control system applications. Expertise in renewable energy systems, power conversion, energy storage, PV, or power systems control. Willingness to travel up to 30% domestically. Legally authorized to work in the United States without sponsorship. experience in PV SCADA controls development and testing. Strong understanding of renewable resource operations and NERC Standards.
Bist Du bereit einem interessanten, riesigem Milliardenprojekt beizutreten, dass sich im Bereich der nachhaltigen Energien spezialisiert hat und obendrauf noch eine extrem attraktive, überdurchschnittliche Vergütung zu erhalten? Die Firma ist bereits seit über 30 Jahren in der Branche aktiv und hat mehrere Awards als bester Arbeitgeber in der EU gewonnen. Dann zögere nicht und bewerbe dich jetzt bei mir! Dich erwarten: -Spannende und abwechslungsreiche Aufgaben-Eine überdurchschnittliche, attraktive Vergütung -Die Möglichkeit für ein riesiges Projekt zu arbeiten und die eigenen Fähigkeiten weiterzuentwickeln-Großzügige Benefits-Pakete-Englischkenntnisse und idealerweise Deutschkenntnisse/Erfahrungen mit deutschen Verträgen Beschreibung: -Position: Contract Manager-Ort: Hamburg, Germany-Arbeitszeit: 40 Stunden die Woche -Startdatum: Sofort Das bringst Du mit:-Erfahrungen als Contract Manager in der Öl- und Gasbranche, Chemiebranche, Pharmabranche, Energiebranche, oder in den erneuerbaraen Energien ODER ähnliches -Team Player Mentalität -Den Willen, an einem großen Milliardenprojekt mitzuwirken
This position will be under the general direction of a Senior Project Manager, on the Project Development Team. The Project Manager position is responsible for the management, or the assistance of managing, all phases of project planning to ensure all project success factors are met, including but not limited to scope, schedule, cost, quality, environmental, safety, communications, security, and integration. This position will be assigned to multiple transmission projects. In aggregate, these projects are typically less than $10M with a Low to Moderate level of complexity impacting only the facility or department level within the Company. The PM serves as the unifying agent providing leadership, management, direction, coordination, and control of the overall project in accordance with the established policies, procedures, systems, and requirements of The Company.This position is typically retained to manage multiple “White” or “Green I” projects per the Project Management Center of Excellence Project Profile Matrix.Required Qualifications: Minimum of 5 years of project management experience. Graduation from a two-year college or university. Working knowledge of project management principles. Working Knowledge to Proficiency in Project Management, Decision Making, Critical Thinking, and Problem Solving; Project related work experience; Risk Management; Project Leadership; Proven Collaborative Team Member.Preferred Qualifications: Graduation from a four-year college or university. Utility Technical Certifications/Training; PMI (PMP or CAPM) Certification; CMII certificates; Professional Engineer License. Working knowledge to proficiency in project related Scheduling/ Cost Controls. Experience in utility industry. Knowledge in construction management. The Project Manager may have relationships with individuals in various organizations ranging from individual contributors to Senior Department Leadership (i.e. individual contributors up to executive management).
Job Overview: We are seeking an experienced Contract Manager to join our team in Sweden or Denmark. The ideal candidate will have a strong background in contract management, with a specific focus on the ABO4 construction contract. This position offers the opportunity to work on exciting projects and play a pivotal role in ensuring successful contract execution.Responsibilities: Manage and oversee all aspects of contracts, with a particular emphasis on ABO4 construction contracts.Review and negotiate contract terms and conditions to mitigate risks and ensure compliance.Collaborate with project teams to ensure contract requirements are met throughout the project lifecycle.Monitor contract performance, track deliverables, and address any deviations or disputes.Work closely with legal and procurement teams to ensure contract compliance and alignment with company policies.Develop and maintain strong relationships with clients, subcontractors, and other stakeholders.Provide guidance and support to project managers and teams regarding contract-related matters.Prepare and maintain accurate contract documentation and records. Qualifications: Bachelor's degree in business, law, or a related field.Proven experience in contract management, with a strong preference for experience with ABO4 construction contracts.Knowledge of construction industry regulations and best practices.Excellent negotiation and communication skills.Strong analytical and problem-solving abilities.Detail-oriented with a focus on contract compliance.Ability to work independently and collaboratively in a dynamic environment.Proficiency in contract management software and Microsoft Office Suite.
Manager of EngineeringLocation: California, USAClient: Energy Storage Solutions ProviderPosition DescriptionThe Manager of Engineering leads multiple engineering groups, representing the client to the public and senior management. The position involves strategic planning, work allocation, and resource management related to new product innovation and development. Employee performance management and professional development are also part of the job scope.Job Responsibilities Participate in strategic and long-term planning for the assigned engineering departments and develop goals and objectives aligned with the client's strategy.Lead the development of methods, techniques, and evaluation criteria for new product innovation and/or development. Evaluate the progress of new product development (NPD) projects.Authorize the spending of development initiatives to support the budget for assigned areas.Work on complex issues that require in-depth knowledge of the company, leading the engineering team through technical problem-solving for new product innovation and/or development projects.Regularly interact with executives and major customers.Direct the work of groups of employees through managers.Perform other duties as assigned. Job Skills Requirements Demonstrated management, business, and operations management skills.Strong analytical, organizational, and reasoning skills/abilities.Results-oriented with the ability to balance other business priorities.Strong organizational skills and the ability to manage multiple projects and priorities simultaneously.Proven leadership skills.Excellent presentation, written, and interpersonal communication skills.Fluent in English and the primary language used in the area of responsibility and/or location. Education Bachelor's Degree in Engineering or related field, or equivalent education and experience. Experience Requirements Minimum of 10 years of experience in engineering or a related field.5 years of leadership or management experience preferred.
My client, a clean energy company, is currently seeking an innovative and motivated leader with at least 5 years of experience in utility-scale solar construction management.Principal Duties and Responsibilities: My client seeks an innovative and motivated individual who will have responsibilities during the construction process. Duties and responsibilities include but are not limited to:Collaborates with the safety department to ensure all safety goals are the highest priority. Provides excellence in the management and delivery of the project in line with the company's expectations. Creates a culture of continuous improvement. Prepare and manage the project execution plan, coordinate and host project kick-off meetings, and prepare and manage effective project closeout. Work with the Commercial Manager to ensure all contracts (prime and sub-contracts) are effectively managed, including change orders and documentation of variances. Onsite owner's representative; monitoring utility-scale solar construction completed by 3rd party EPC Contractors. Cultivate positive working relationships with 3rd party EPC Contractors. Manage the construction of utility-scale solar projects to the 3rd party EPC contract and permit requirements, including schedule, budget, scope of work, and deliverables. Complete daily safety walks and submit a daily safety walk report to the head of internal safety programs. Manage internal safety goals with 3rd party EPC Contractors. Attend internal and external meetings as necessary (e.g., daily, weekly). Track project progress against the schedule and manage schedule remediation plans. Discuss daily objectives with 3rd party EPC Contractor and promptly report back perceived risks and other issues/observations. Verify and sign-off on various construction milestones (civil, structural, mechanical, and electrical) and update internal tracking software. Ensure thorough and quality work by verifying items against scopes of work and design plans to minimize punch lists and deliver the best-in-class assets. Verify 3rd party EPC Contractors adhere to QA/QC plans. Work with in-house engineering to provide information and attend job walks to facilitate reports from 3rd party independent engineers. Collect 3rd party EPC deliverables and either upload them to an internal data room or send them to the appropriate team member for sign-off (e.g., test reports, progress reports, etc.). Review draft invoices with 3rd party EPC Contractor and sign off on work completed. First line of defense against proposed change orders; escalating to the internal Project Manager as necessary. Proactively communicate and manage an ongoing punch list with 3rd party EPC Contractor, managing the final punch list from Mechanical Completion to completion. Make sure that the company is being represented in accordance with my client's corporate values.Core Competencies:Proven ability to motivate others inside or outside the organization. Team player providing support to both team members as well as members of the extended team. Ability to develop, maintain, and strengthen partnerships with others inside or outside the organization. Strong proficiency in communication. The ability to solicit others for support for ideas and solutions. The ability to quickly identify the information needed to clarify a situation, seek that information from appropriate sources, and use skillful questioning to draw out the information to find a solution. Anticipate the implications and consequences of situations and take appropriate action to be prepared for possible contingencies. Demonstrate depth of technical knowledge and skill in utility-scale solar construction. Take initiative to identify what needs to be done to maintain project schedule and budget and ensure a plan is in place. Drive to complete thorough work; follow up with others to ensure that commitments have been fulfilled.Minimum Qualifications:OSHA 30 Certified. Proficient with Microsoft Word and Excel. 5 years of onsite utility-scale solar construction management. Advanced knowledge of solar construction management processes, means, and methods. Expert knowledge of building products, construction details, and relevant rules, regulations, and quality standards.
Site Manager (Transmission) - 12-Month Contract (Initially)Location: Scotland, UKWe are currently seeking highly skilled and experienced Site Managers to lead transmission projects in Scotland. This 12-month contract offers an excellent opportunity to join a dynamic team and make a substantial impact in the civil and power sectors. If you possess the necessary qualifications and experience, we invite you to apply and contribute to the success of our projects.Key Responsibilities: On-Site Ownership: Oversee and manage all on-site operations, ensuring safety, quality, and efficiency in project execution.Technical Support and Advice: Provide expert technical support and guidance, particularly focusing on electrical aspects during various stages of construction for transmission projects.Project Management: Coordinate and manage resources, schedules, and activities to meet project goals and deadlines.Quality Assurance: Ensure adherence to quality standards and compliance with project specifications and regulations. Requirements: Qualifications: Hold a valid SMSTS (Site Management Safety Training Scheme) certificate.Experience: Minimum of five years of experience as a supervisor or manager in the civil or power sector, with a focus on transmission projects.Electrical Expertise: Strong technical background and expertise in electrical aspects of construction within the transmission industry.Availability: Immediate availability to start and commit to a 12-month contract, working five days a week on-site for 10 hours a day, with potential for weekend work. Contract Details: Duration: 12 months (initially)Location: Scotland, UKWork Arrangement: Five days a week on-site, 10 hours per day, with opportunities for weekend work If you are a proactive and experienced Site Manager with expertise in transmission projects and electrical aspects of construction, we encourage you to apply for this exciting opportunity. Please submit your CV and cover letter to olivia.wilde@spencer-ogden.com at your earliest convenience. We look forward to reviewing your application and potentially having you join our team.Note: Immediate availability to start is highly preferred.
JOB OVERVIEWYou'll contribute to the entire life cycle of our wind projects, from development to execution and asset management.Collaborate with a diverse global team with expertise in wind resource assessment, construction, management, and technology assessment across multiple locations. KEY RESPONSIBILITIES Conduct functional assurance, technical project preparation, and execution support for both offshore and onshore wind projects.Develop technical specifications, internal standards, and engineering guidelines, as well as define Scope of Works for suppliers or contractors.Assist in wind resources analysis, reviewing and evaluating energy yield results for new project development and financial investments.Provide support for wind project development and O&M resources at the group level.Collaborate with various group functions such as procurement, finance, etc. to achieve project objectives.Review and organize the internal and external deliverables, including engineering drawings, technical reports, and procedures. KEY REQUIREMENTS Technical bachelor's degree required (e.g., Mechanical, Electrical, Renewable Energy, Maritime Engineering)Minimum 5 years of experience in on-shore and/or off-shore wind project developmentExperience in technology selection and operating wind farmsKnowledge of wind IEC standardsAdvantageous to have expertise with software tools such as WAsP, Windographer, Global Mapper Pro