Senior Electrical Engineer - Substation
- Location: St Louis
- Salary: Market related
Description:
Responsible for oversight of substation engineering and consulting services for clients across the US and internationally. Main responsibilities include leading others in creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. This position can influence the future of the resiliency and reliability of the electric grid. Opportunities to advance into leadership/management roles are available. Position may include full or partial responsibility of the following assignments:
Requirements:
The Senior Electrical Engineer will lead electrical design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities. The Senior Electrical Engineer will lead the project team throughout the design and construction process, adapting electrical plans according to budget constraints, design factors or client needs. Lead electrical design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by the project managers. Prepare electrical equipment: packaged equipment specifications and data sheets, Request for Qualifications (RFQ's), technical bid summaries, and purchase recommendations. Review electrical equipment vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers. Participate in development of project schedule, scope, budget staffing planning and construction planning. Responsible for effective management of change orders. Applies expert knowledge of commonly used electrical concepts, practices, codes and procedures within the electrical engineering services industry. Applies knowledge and experience to complex projects, find non-standard design solutions. Quality review production drawings for a variety of projects and project related data as required by the project managers to verify corrections are made within multiple CAD related software. Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of electrical systems. Leads field inspections, installation, measurements or calculations for public and private clients. Prepare and present technical reports for clients and industry publications. Build effective relationships with existing clients, customers and contractors and develop new business opportunities. Responsible for ensuring customer satisfaction goals and expectations are met. Participate sales and marketing efforts and identify key pursuits. Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance. Prepare and present project budgets and cost estimates. Report project performance. Provide leadership, guidance and instruction to the electrical engineering practice. Mentor and guide less experienced engineers. Responsible for QA/QC process adherence. Responsible for effective communication with other engineering disciplines.
Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. This position can influence the future of the resiliency, reliability and economic operation of the electric grid. Opportunities to advance into leadership roles are available.Position may include leading or executing the following assignments: Preparation of proposals and scope development, including conceptual designs and execution plansPrepare engineering cost and man-hour estimates and schedulesPhysical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of materialProtection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiringPrepare calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.)Prepare equipment specifications for procurement and/or factory acceptance testingCoordinate design activities with other departments (Civil/Structural, Networks, Transmission Line, etc.)Provide guidance and mentoring to less experienced team membersRegularly meet and correspond with clients or outside personnelPerform quality reviews for other engineers and designersProvide short term field support during constructionSupport business development and marketing initiativesOther areas of involvement may include: relay settings, 3D/intelligent design, or industry/professional technical committee involvement Requirements: Bachelor's degree in Electrical Engineering from accredited program Minimum 3 years related experience (completion of master's degree in related field may be substituted for one year of experience)Completion of FE exam strongly preferredProficiency with National Electrical Safety Code and IEEE / ANSI StandardStrong preference for those with: Excellent written & verbal communication skillsStrong analytical and problem-solving skillsCapability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria
**this is a 6 month contract to direct hire opportunity100% remote- work from home anywhere within the United States**NO sponsorship available! Only US based candidates apply! Overview:As a Senior Protection & Control Engineer, you will be responsible for designing and implementing protection and control engineering activities for high voltage substation and transmission projects. You will utilize your knowledge of protective relaying and control systems to contribute to EPC substation and transmission projects.Responsibilities:• Perform analysis and design of Protection Systems for HV substation/ and FACTS • Develop substation relaying & metering diagrams (i.e. Single line/A.C./D.C. schematic diagrams) • Develop the substation communication and network diagram • Prepare specification & Bill of Material for Protection/Control/Metering/RTU/ Communication Panels • Develop Protection and Control Panel layouts. • Develop Protection and Control Panel wiring diagrams. • Develop Cable Schedule for Substation. • Perform Factory Acceptance Test for Protection and Control Panels. • Perform reviews of work performed by others • Work closely with other engineering and design team members to coordinate overall design package and requirements • Perform relay coordination study and develop the relay settings file • Coordinate with supplier and contractors • Flexibility to travel locally and internationally to customer meetings and project sites, with an approximate travel of 25%.Qualifications:• Bachelor's degree in Electrical Engineering with a power systems emphasis from an ABET-accredited engineering program; Master's degree preferred. • 8 years or more of experience with a focus on protection/control/communications design for high voltage substations. • Experience in Communication Network Technologies • Experience in Communication protocols such as IEC61850, DNP, Modbus, … • Experience in writing and providing support documentation for relay calculations. • Knowledge on ANSI standards, IEC standards knowledge is a plus. • Experience with various vendor protective relay equipment typically used in substation. protection, including SEL, Siemens, GE. • Familiarity with Auto-CAD or Micro-Station. • Good communication skills. • Professional Engineering license is preferred. • Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers.
Electrical Testing & Commissioning Specialist is responsible for directing commissioning and testing activities in the field. This position is responsible for providing commissioning and testing solutions. Prepare and recommend testing & commissioning solutions to the Project Manager or client. Delivers solutions to Project Manager or Senior Engineer to address future client needs and provide cost analysis on testing solutions. Ensures the performance of all field testing on substation equipment is completed accurately and safely. Performs demonstration tests, as required, which are a series of functional tests designed to simulate real world conditions to ensure proper operation of yard equipment. Develops and executes substation equipment test procedures. Provide technical instruction, mentoring, guidance with regard to substation systems and electrical power systems to field testing technicians. Develop testing & commissioning departmental and project requirements. Ensure compliance of testing QA/QC process. Regularly meet and correspond with clients and outside personnel with responsibility to act independently on technical matters related to testing & commissioning. Manages marketing efforts for key pursuits. Consults with clients on testing and commissioning projects. Maintains client relationships with client field personnel. Other duties as assigned.
Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation. Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following: Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English. Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.
Job DetailsDescription We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.Electrical Engineer with an emphasis on power generation. Multi-discipline projects in hydro, gas and fossil power generating facility experience is required. Duke, TVA, Exelon, Dominion or other power industry experience is desired. Desired experience includes low voltage and medium voltage power distribution, motor controls for both low voltage and medium voltage, interfacing industrial processes to DCS and/or PLC systems and the use of power distribution system modeling software (ETAP or similar). Need to be familiar with panel design, and 3D environment.Candidate needs to be a leader, capable of coordinating engineering and design efforts, working within a team, and comfortable being in front of peers and clients leading/conducting meetings. At times job duties will require coordinating with project managers, and client to develop proposal documents and estimates to facilitate bidding on work. Work will mostly center around modifications and upgrades in existing facilities. Experience in relay protection would be a plus.Travel RequiredYes. Occasional one or two day site visits.QualificationsSkillsRequiredElectrical EngineeringIntermediateBehaviorsRequiredTeam Player: Works well as a member of a groupLeader: Inspires teammates to follow themDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellDedicated: Devoted to a task or purpose with loyalty or integrityMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsSelf-Starter: Inspired to perform without outside helpEducationRequiredBachelors or better in Engineering.ExperienceRequired4-10 years: 4-10 years of progressive experienceLicenses & CertificationsPreferredProf Engineering (PE)
Essential Functions: Design electrical infrastructure for photovoltaic systems, incorporating electrical engineering knowledge, solar photovoltaic system design principles, and industry best practices.Develop construction documents based on customer requirements, engineering decision-making, and compliance with NEC and CEC codes.Address comments from the Authority Having Jurisdiction (AHJ) during the permit review process, following company SOPs, to facilitate timely issuance of building permits.Conduct technical reviews of system components and ancillary devices to ensure compliance with design specifications.Provide prompt responses to Requests for Information (RFI) from field installation personnel, in accordance with company SOPs.Review testing data from internal field personnel and third-party testing agencies to ensure product quality.Provide engineering guidance and internal training to the company upon request.Support other departments with electrical questions and problem-solving throughout the construction process.Perform other assigned duties as required. Knowledge, Skills, and Experience: Required: Strong verbal and written communication skills in English.Ability to multitask and manage multiple projects simultaneously.1-3 years of design or engineering experience related to renewable energy.Proficiency in AutoCAD.Proficient in MS Office.Knowledge of photovoltaic systems, NEC requirements, and construction practices.Effective prioritization and task execution in a high-pressure environment.Willingness to learn and apply new technologies.Valid driver's license.Bachelor's degree in Mechanical Engineering or Electrical Engineering. Preferred: Proficiency in PVSyst.Master's degree in Mechanical Engineering, Electrical Engineering, or related discipline.EIT Certification.
Please email ismay.burch@spencer-ogden.com for more details
Permanent opportunity for an experienced Electrical Service Technician (EST)to join one of the world's largest temporary power companies, multiple roles located in Brisbane, Townsville and gladstone QLD. The New Role Involves: Preventing and scheduling maintenance of hire fleets for optimized performance as well as carrying out repairs. Providing technical support to the sale teams when required. Maintaining the levels of all required materials and ensure the appropriate tools are in place and maintained. Carrying out effective troubleshooting to minimise downtime. Contributing to optimum team performance and capability by providing quality workmanship to maintain and enhance the reliability of equipment. Maintaining and enhancing relationships and communication with internal and external customers.
Spencer Ogden are working with a Client within the power space. This is an exciting opportunity for a WA FIFO Power Station Operator, to join their team. Key information: Job Role: Power Station OperatorContract: Contract to perm roleRoster: 15 days on, 13 days offRate: $135k plus SuperStart Date: 16th August 23Location: FIFO out of PerthTickets Required: WA electrical license, Relevant trade qualifications, current WA drivers license, current police clearance (within 6 months of issue) or be able to obtain one, be able to pass a full comprehensive pre- employment medical and drug test. Previous experience required: Track record in operating and/or repairing gas/ diesel power stations. Ability to interpret all relative drawings and procedures, previous experience as an operator, excellent organizational and communication skills, intermediate computer skills. Your Responsibilities will include: Power station operations (5 X Cummins HSK78 gas generators)Routine and breakdown maintenance of power generation and auxiliary equipmentProvide detailed reports during routine maintenance tasks and unplanned maintenance eventsManaging and adhering to OHSE policies and procedures and maintaining the site to ensure it is clean and tidyAfter hour call outs to attend the power station for faults / breakdownsAnalysis of power generation equipment/systems and associated auxiliary equipment.Maintain accurate running hour reports, energy readings as required.Attend the power station after hours while on site for faults/breakdowns.Raise and maintain work order and purchase requests.Ensure optimum stock levels of spares and consumables for the site requirements. If you have this type of experience and are interested in the role or if you know someone else who might be interested, please apply or get in touch with me via my contact details.
Power Systems Stability and Steady-State EngineerWe are seeking a talented and experienced Power Systems Stability and Steady-State Engineer to join our team. As a Power Systems Engineer, you will play a pivotal role in analyzing and enhancing the stability and steady-state performance of our power systems. The ideal candidate should possess significant experience in both stability and steady-state as they relate to power systems.Responsibilities:· Perform comprehensive stability analysis of power systems, including transient stability, voltage stability, and small signal stability assessments.· Conduct steady-state analysis, load flow studies, and power flow simulations to evaluate the performance of the power system under various operating conditions.· Identify potential stability and steady-state issues and provide recommendations for system improvements, control strategies, and operational enhancements.· Collaborate with the planning and operations teams to assess the impact of system changes, such as generation additions, load variations, and network expansions on stability and steady-state performance.· Utilize advanced stability and steady-state analysis software and tools to model and simulate complex power system networks accurately.· Investigate and troubleshoot stability and steady-state-related events, working closely with field personnel and control center operators.· Develop and implement stability control schemes, as well as steady-state control algorithms, to improve the overall dynamic and steady-state performance of the power system.· Stay updated with industry standards, emerging trends, and best practices related to power systems stability and steady-state analysis.· Participate in the testing and commissioning of new power system equipment and control systems to verify their stability and steady-state performance.· Prepare technical reports and documentation, presenting findings and recommendations to stakeholders.Requirements:· Bachelor's degree in Electrical Engineering or related field. A master's degree in Power Systems or a relevant discipline is preferred.· Extensive experience in stability and steady-state analysis as they relate to power systems, including transient stability, voltage stability, small signal stability, and power flow studies.· Proficiency in using industry-standard stability and steady-state analysis software such as PSS/E, PSCAD, PowerWorld, or DIgSILENT PowerFactory.· Strong understanding of power system dynamics, control systems, and protective relaying.· Familiarity with grid codes, regulations, and standards related to power systems stability and steady-state analysis.· Experience with dynamic modeling and simulation of power system components like generators, FACTS devices, and HVDC systems.· Solid analytical and problem-solving skills, with the ability to interpret simulation results and propose effective solutions.· Excellent communication and interpersonal skills to collaborate effectively with cross-functional teams and stakeholders.· Ability to work on multiple projects simultaneously and deliver results within defined timelines.· Professional engineering license or willingness to obtain one is a plus.Join our team and contribute your expertise in both stability and steady-state analysis to ensure the reliable and efficient operation of our power systems. If you are passionate about power systems and possess the required experience, we encourage you to apply for this challenging opportunity.
Spencer Ogden have been engaged by a market leader in the power generation and maintenance Industry who are seeking an Electrical Service Technician to join the team in a permanent position. Job Title: Service Technician Start date: ASAP Location: Ravensworth and Hunter Valley NSW region Hourly rate: $47-$50 Roster: 5&2 (Local candidates) Hours: 7.6 per day (38 hour week) Overtime: Weekdays (Monday to Friday) Time and one half (1.5) for the first three (3) hours; and; Double time (2.0) thereafter. Weekends Saturday: time and one half (1.5) for the first three (3) hours and double time (2.0) thereafter. A team member is to work or be paid no less than four (4) hours on a Saturday. Sunday: double time (2.0). A team member is to work or be paid no less than three (3) hours on a Sunday. Benefits: Service Vehicle Mobile Phone Lap top Birthday Leave Service Awards Recognition program with monthly and annua