Customer Quality Engineer
- Location: Austin
- Salary: Market related
This engineer will support the Quality Assurance team in ensuring Customer Satisfaction and enhancing the Customer Experience. Will experience working with utility scale solar trackers and Engineering, Procurement & Construction (EPC) contractors of solar plants.
Qualifications:
This company develops, invests, and delivers solar photovoltaic (PV) and battery energy storage systems (BESS) projects through Engineering, Procurement, Construction (EPC) services in North America.The company brings a decade of global leadership in solar PV to deliver utility-scale power generation plants customized for local and regional energy markets. This company offers the full spectrum of PV solutions - from the core technology of cells and modules to large-scale project development and investment. With proven capabilities across the solar and battery storage value chain, minimizes uncertainty and risk and helps customers achieve a higher return on their investment in renewable energy.SUMMARY The Director of Engineering is responsible for leading the technical development, implementation, and engineering execution of various renewable projects within the EPC team (especially PV & BESS), and is responsible for both the management and development of overall engineering team. This position reports to the VP of Engineering or another senior management personnel that the VP of Engineering may designate. This position is open to fully remote candidates or candidates located in Irvine, CA. Working hours are Monday through Friday, from 8:00am to 5:00pm or 9:00am to 6:00pm. This position may be expected to travel at least 25%.RESPONSIBILITIES Lead all stages of project design and engineering, including conceptual and advanced system design, observing regulatory codes, customer requirements, balance of systems, site visits, permitting and technical support during construction phase; In collaboration with other team members, contribute to the completeness to design and deliver PV, BESS, and other renewable projects; Lead the technical tasks in preparation of proposals, projects, and the review of potential project/supplier acquisition opportunities; Report on the planning and technical design, and present it to the Vice President of Engineering; Work in a team to develop and improve the system standards; Work closely with the team to define company processes and metrics, and plan and allocate resources across existing programs to ensure strategic alignment and needed technical trainings; Build a quality culture of continuous improvement that enhances company efficiency and engineering quality; Drive a safety culture that embraces both a "Responsibility to act" and "Show by Example" approach; Supervising compliance with company - project specific standards; Supervising compliance with the requirements of the company's quality management system; Perform other duties and special projects, as assigned. REQUIRED QUALIFICATIONS A degree in Electrical Engineering, Mechanical Engineering, or another related engineering science, with the working knowledge within several fields of engineering; Minimum of 10 years of professional engineering experience in the Solar / BESS industry; Minimum of 5 years of management experience leading a team; Extensive technical experiences on photovoltaic and energy storage projects; Experience with photovoltaic performance modeling tools (preferably PVSyst); Knowledge of PV/BESS/etc. plant design and optimization; Knowledge of the National Electric Code and various Standard Industry Codes; Willingness to travel, at least 25% of the time; Ability to motivate and develop others; Excellent written and verbal communication skills.
Essential Functions: Design electrical infrastructure for photovoltaic systems, incorporating electrical engineering knowledge, solar photovoltaic system design principles, and industry best practices.Develop construction documents based on customer requirements, engineering decision-making, and compliance with NEC and CEC codes.Address comments from the Authority Having Jurisdiction (AHJ) during the permit review process, following company SOPs, to facilitate timely issuance of building permits.Conduct technical reviews of system components and ancillary devices to ensure compliance with design specifications.Provide prompt responses to Requests for Information (RFI) from field installation personnel, in accordance with company SOPs.Review testing data from internal field personnel and third-party testing agencies to ensure product quality.Provide engineering guidance and internal training to the company upon request.Support other departments with electrical questions and problem-solving throughout the construction process.Perform other assigned duties as required. Knowledge, Skills, and Experience: Required: Strong verbal and written communication skills in English.Ability to multitask and manage multiple projects simultaneously.1-3 years of design or engineering experience related to renewable energy.Proficiency in AutoCAD.Proficient in MS Office.Knowledge of photovoltaic systems, NEC requirements, and construction practices.Effective prioritization and task execution in a high-pressure environment.Willingness to learn and apply new technologies.Valid driver's license.Bachelor's degree in Mechanical Engineering or Electrical Engineering. Preferred: Proficiency in PVSyst.Master's degree in Mechanical Engineering, Electrical Engineering, or related discipline.EIT Certification.
This individual is responsible for quality assurance and quality control in all phases of construction at a project site. Travel is a requirement of this position.- Provide on site inspection and documentation to ensure that all construction is completed in accordance with the design and quality control and/or assembly manual supplied by the manufacturer as well as Field Quality Control Plan - Develop and implement software for material inventory tracking management. Software and implementation plan must comply with Owner’s Specifications, meet internal Quality assurance standards, and provide concise product placement records - Have the ability to deal on a daily bases with project management, engineers, concrete supplier and concrete testing labs, steel and turbine manufactures concerning various site issues, inconsistencies and non-conformances - Direct and train skilled labor in various procedures - Capable of reading and understanding shop drawings, mix designs, geotechnical reports, turbine suppliers manuals, and engineered drawings - Knowledge of reinforcement and concrete placement, product testing, civil construction processes - Liaison with Client, regulatory agencies, subcontractors, vendors, suppliers and/or internal departments on quality related matters - Manage quality technicians during construction - And various duties as assigned by the Director of QualityRequirements:- A college degree or equivalent work experience in construction management or quality control - Minimum of 3-5 years in renewable energy, specifically solar energy - Must be authorized to work in the United States now and in the future without company sponsorship - Must have high voltage experience in Solar, BESS or Substation
QUALITY INSPECTOR –Location: United Kingdom (UK), Hybrid Onshore and Offshore WorkWe are seeking a highly skilled and motivated Quality Inspector for a 12-month (initial) contract position based in the United Kingdom. This role offers a unique opportunity for a quality professional to contribute to our renewable energy project. The ideal candidate will possess a GWO (Global Wind Organization) certificate and exhibit proficiency in English, with spoken knowledge of French being a valuable addition.Key Responsibilities: Conducting factory and load-out inspections to ensure compliance with quality standards.Collaborating in the development and implementation of the project quality plan.Planning and executing inspections and tests on Wind Turbine Generators (WTG) at onshore and offshore locations. Requirements: Possession of a valid GWO certificate.Proficiency in English is mandatory, and spoken knowledge of French is advantageous.Previous experience in quality inspection, preferably in the renewable energy or related industry.Ability to effectively communicate and collaborate with cross-functional teams.Strong attention to detail and analytical skills.Willingness to work in both onshore and offshore environments. Contract Details: Duration: 12 monthsLocation: United Kingdom (UK)Work Arrangement: Hybrid (Onshore and Offshore) If you are a dedicated Quality Inspector with the required qualifications and enthusiasm for the renewable energy sector, we invite you to apply for this exciting opportunity. Please submit your CV and cover letter to olivia.wilde@spencer-ogden.com by 5pm today. We look forward to reviewing your application and exploring the potential of having you join our team.
We're seeking a motivated Electrical Engineer for a Control Center role. You'll serve as an engineering liaison between DSO and Transmission Providers for switching events, contributing to grid integration. Candidates with a background in electrical engineering are preferred.This role includes a blend of remote and in-office work (Cedar Rapids, IA, 2 days/week). Candidates must reside in Iowa.Responsibilities: Work on structured assignments with supervision.Participate in Safe Start training for zero injuries philosophy.Identify and solve problems within your scope.Apply standard practices and procedures for limited-scope problem-solving.Understand technical and cost-effective aspects to develop solutions with budget, schedule, and scope.Make low-risk decisions based on technical knowledge with guidance.Learn about the business environment.Collaborate with union employees, contractors, and business unit customers.Develop relationships within the department, with customers, and peers.Demonstrate awareness of financials and departmental budgeting.Understand purchasing procedures and compliance (e.g., SOX).Communicate effectively with vendors, construction, operations, and internal stakeholders.Learn to document project activities and outcomes. Requirements: Bachelor's Degree in accredited Engineering program.Preferred: Previous technical/professional experience, internship, or co-op in engineering.Covered by Department of Transportation drug/alcohol testing regulations. Skills: Effective interpersonal, verbal, and written communication skills.Proficiency in computer software (email, word processing, spreadsheets, project management).Comfortable in a diverse and inclusive environment.
Manager of EngineeringLocation: California, USAClient: Energy Storage Solutions ProviderPosition DescriptionThe Manager of Engineering leads multiple engineering groups, representing the client to the public and senior management. The position involves strategic planning, work allocation, and resource management related to new product innovation and development. Employee performance management and professional development are also part of the job scope.Job Responsibilities Participate in strategic and long-term planning for the assigned engineering departments and develop goals and objectives aligned with the client's strategy.Lead the development of methods, techniques, and evaluation criteria for new product innovation and/or development. Evaluate the progress of new product development (NPD) projects.Authorize the spending of development initiatives to support the budget for assigned areas.Work on complex issues that require in-depth knowledge of the company, leading the engineering team through technical problem-solving for new product innovation and/or development projects.Regularly interact with executives and major customers.Direct the work of groups of employees through managers.Perform other duties as assigned. Job Skills Requirements Demonstrated management, business, and operations management skills.Strong analytical, organizational, and reasoning skills/abilities.Results-oriented with the ability to balance other business priorities.Strong organizational skills and the ability to manage multiple projects and priorities simultaneously.Proven leadership skills.Excellent presentation, written, and interpersonal communication skills.Fluent in English and the primary language used in the area of responsibility and/or location. Education Bachelor's Degree in Engineering or related field, or equivalent education and experience. Experience Requirements Minimum of 10 years of experience in engineering or a related field.5 years of leadership or management experience preferred.
We are currently seeking a self-motivated and passionate Electrical Engineer to join our team. In this role, you will serve as the engineering support for our Distribution System Operations (DSO) department, contributing to the growth of this exciting engineering field. We are in search of candidates ready to take on influential roles within our team. Ideal candidates will have a background in electrical engineering.This is a hybrid-remote position, reporting to either our Cedar Rapids, IA or Madison, WI office. Candidates must be residents of Iowa or Wisconsin.What You Will Do: Collaborate with engineering and operations teams to plan, implement, and support distribution grid programs, projects, and initiatives using various platforms, including: SCADA (Supervisory Control and Data Acquisition)ADMS (Advanced Distribution Management System)OMS (Outage Management System)DERMS (Distributed Energy Resources Management System)FLISR (Fault Location, Isolation, and Service Restoration)VVO/VVC (Volt-VAR Optimization and Volt-VAR Control) Work with internal and external stakeholders to develop recommendations for enhancing operating tools, situational awareness, and overall distribution system performance and reliability. Collaborate with field operations, engineering, IT, and transmission partners to provide long-term grid operations support, including electric and gas distribution system strategy, analysis, implementation, operation, and maintenance of complex technology systems. Maintain the data necessary for ADMS, DERMS, and other power system platforms. Collaborate with cross-functional teams to rectify errors between systems and provide feedback on recurring issues for new project analysis and scoping. Develop an understanding of customer needs and expectations and propose solutions for moderately complex issues. Participate in identifying and solving problems within the assigned area of responsibility with guidance from a supervisor. Apply governmental and organizational engineering standards, interpret policies, and exercise discretion and judgment in resolving moderately complex problems. Demonstrate critical thinking and communication skills necessary for developing recommendations that offer technically sound and cost-effective solutions to specific problems. Education Requirements: A Bachelor's Degree in an engineering program accredited through the Engineering Accreditation Commission is required. A Bachelor of Science in Electrical Engineering degree is preferred. Required Experience: 2+ years of related engineering experience.
The Senior Electrical Engineer (Electrical SME) will be responsible for the electrical engineering scope of solar PV and battery storage projects in late-stage development, construction and operation. Responsibilities include electrical design review, support of project engineers in terms of electrical engineering matters, create technical specifications for owner furnished equipment, standardization of electrical designs and scope of work, electrical test report review, field quality control and field punch list development. The Senior Electrical Engineer (Electrical SME) will join a project execution team and serve as the primary resource to the project engineers for all electrical engineering matters of assigned projects and process improvement tasks. Excellent communication, task management and planning skills are needed, in addition to technical breadth. The successful candidate will have a depth of experience in the design, engineering and analysis of PV and BESS projects ranging from 1 to 500 MW as well as an in-depth understanding of the architectures and components to build such systems. The position can be at one of this company's offices or remote, and may include up to 25% travel to project locations and partner offices. Key Responsibilities Project Execution Provide electrical engineering support to project engineers Electrical engineering design review of PV and/or BESS projects Review of electrical test reports (MV/AC/DC cables, transformers, BOP equipment, etc.) and electrical system studies (Arc-Flash, Short Circuit, Load Flow, Grounding, Ampacity, etc.) Standardize common approach to electrical calculations and reviews Develop a checklist for project engineers to review design sets, specifications, test reports and studies Project Scope of Work and electrical design standards development Create and/or update technical specifications for the procurement of owner supplied equipment such as racking/inverter/BESS/PV module Support utility interconnection scope for DG projects (1MW - 20MW) in execution phase Seek and evaluate proposals for electrical engineering services Support the coordination of engineering consultants to develop project construction drawings and support material Review and comment on electrical design deliverables provided by consultants and contractors for the construction of projects Respond to contractor/consultant RFIs (electrical) Perform QA/QC field inspections and punch list development Perform Job Safety Assessments and Safety Walks to identify job-site hazards Review commissioning reports and analyze system performance Project Development Technical project due diligence and project engineering design review Equipment review and selection Engineering Procurement and Construction contract support Energy production and performance modeling for PV and energy storage systems Assessment of model accuracy including meteorological assessment and P-50/P-90 analysis Engineering Support Design optimization to maximize reliability, safety, and reduce cost Review recent technology and companies for inclusion on the Approved Vendor List Collaborate with Asset Management team to troubleshoot existing systems or develop repair and remediation plans Growth and Leadership Improve and develop processes for the execution of safe, quality and high-performance projects Mentor and educate team on changing trends in technology, best practices and safety Review the work of project engineers and provide constructive feedback for improvement, and mentorship Participate in growth planning process by contributing to process improvement task forces and other strategic planning activities Skills and Qualifications Primary Qualifications Undergraduate degree in Electrical Engineering or equivalent technical field 7+ years professional experience in solar PV system design, development, and construction 3+ years professional experience with energy storage systems design Proficiency in PV system design, including 1-line and 3-line diagram conventions, NEC conductor sizing, overcurrent protection sizing, utility disconnecting means requirements, equipment selection, grounding methodologies and arc flash analysis Experience with medium voltage and high voltage interconnection design Comfort with NEC code, as well as related codes such as NESC, IBC, NFPA 855 and NFPA 70E Ability to work in a team environment Proficient with MS Office Suite "Plus" Qualifications Graduate degree in Engineering PE license PMP Certification NABCEP PV Installation Professional certification Experience with PVSyst, ETAP, SKM, PSS/E, PSLF, PSCAD and other advanced modeling tools Substation/HV design experience Spanish language skills OSHA 10-hr or comparable job-site safety certification
Job Description:This is an exciting opportunity to work with a growing renewables team based in the Northeast. They are actively seeking out a BESS engineering expert to take a lead role in the development of their projects. Responsibilities: Lead the design and implementation of renewable generation control system applications for North American projects. Design, implement, and test various components of the renewable generation control system, including overall power plant control for PV Solar and BESS sites based on established PSSE models and ISO/RTO requirements. Develop applications for BESS energy management system. Coordinate asset generation between PV Solar and Battery Energy Storage System (BESS). Design SCADA systems for BESS and PV Solar, ensuring effective communication through industry standard protocols (Modbus, DNP3, etc.). Provide technical support across departments for new project pursuits and product development. Mentor and guide less experienced engineers in renewable control system application design and commissioning. Create and maintain engineering plans and schedules. Support customer Factory Acceptance Test and participate in site commissioning and Site Acceptance Test activities. Identify opportunities for product and process improvements and provide valuable suggestions. Manage time effectively to meet project schedule and commitments. Cultivate and nurture customer relationships. Monitor and track project financial performance. Requirements: Bachelor's degree in Engineering or a related technical discipline. Minimum 9+ years of experience in power generation control system applications, specifically in renewable energy systems, power conversion, energy storage, PV, and/or power systems control. Willingness to travel up to 30% domestically. Legal authorization to work in the United States without sponsorship. Familiarity with UL1973, UL9540, UL9540A, NFPA 855, and NFPA 70E. Experience working with utility-scale battery storage systems preferred.
Spencer Ogden is partnered with a global multi-energy provider in Houston seeking a Senior Project Engineer to join their Project Management team and their busy pipeline of utility scale solar projects! The Role: Responsible for the engineering interface within development, transmission, engineering, operations, and project/construction managementPlan and manage all technical aspects and decisions associated with design, technical adequacy, permitting, schedule, budgets and construction and start up support of assigned Wind, Solar, and Energy Storage projects.Define and manage the scope, design criteria, priority, schedule, quality and budget for all assigned engineering tasks required in support of development and project executionDefine and establish project technical requirements for EPC RFP’s scope of work and associated bid reviews, evaluations and recommendations consistent with project budget and delivery milestones.Analysis of engineering alternatives to ensure most cost-effective approach is followed while maintaining compliance with technical adequacy and safety standards.The position has a competitive base salary and bonus as well as hybrid work schedule with three days in the Houston office. Qualifications: Bachelors Electrical, or Civil Engineering.7+ years of experience within Renewable Energy Power Generation through different phases of project lifecycle.Knowledge of CAD Design & Electrical Systems.History of working with an EPCPrevious Utility Scale Renewable experiencePE License in TX is a plus
Job Summary Under minimal supervision, responsible for support of NERC CIP compliance activities associated substation relaying and associated equipment.This position ensures high quality of the engineering team's deliverables verifying all documented processes and procedures are followed. These procedures are based on enforceable national standards, client and industry best practices and are uniformly applied in system protection. Primary Responsibilities1. Prepares, executes and coordinates the planning, documentation and follow up of Cyber Asset assessments (CSVA, CSV), protective (security) patching and conducts reviews confirming engineering protection and control procedures are delivered.2. Able to work in a variety of functions either in field locations or in the home office, which may include necessary activities ensuring quality processes are implemented in optimization of system/component performance and availability. Verification of in field systems either documenting as left conditions or ensuring new systems meet requirements before in service.3. Applies industry best practices in development of procedures and processes addressing quality and reliability standards requirements. 4. Works effectively in a team environment and may assume the role of team leader.5. Provides quality assurance, procedure and standards requirements guidance and recommendations to other PPL employees in support of high quality, timely and cost-effective engineering solutions to technical problems. CIP audit guidance as required.6. Builds knowledge of the organization's reliability and quality procedures and processes.7. Ensures department deliverables exceed all industry standard requirements through development and implementation of uniform processes based on industry best practices. 8. Implement industry best practices in development of efficient review processes and procedure development. Basic Qualifications1. Bachelor's Degree in engineering or science from a college or university accredited by ABET. Candidates with extensive experience and certifications in quality assurance in lieu of the specified degree will be considered.2. Minimum 5 years experience implementing a quality or reliability program, or project management involving engineering projects.3. Engineers with quality or licensing experience with generation, distribution, industrial protection, or system planning will be considered.Preferred Qualifications (some of the following)1. NERC Reliability standards expertise Cybersecurity program implementation expertise.2. Knowledge of Protection & Controls engineering3. Six Sigma Certification4. PMP Certification5. Experience in the energy industry Quality program implementation in a regulated industry such as nuclear or pharmaceuticals.
This position ensures high quality of the engineering team's deliverables verifying all documented processes and procedures are followed. These procedures are based on enforceable national standards, PPL and industry best practices and are uniformly applied in system protection. Primary Responsibilities1. Prepares, executes and coordinates the planning, documentation and follow up of Cyber Asset assessments (CSVA, CSV), protective (security) patching and conducts reviews confirming engineering protection and control procedures are delivered.2. Able to work in a variety of functions either in field locations or in the home office, which may include necessary activities ensuring quality processes are implemented in optimization of system/component performance and availability. Verification of in field systems either documenting as left conditions or ensuring new systems meet requirements before in service.3. Applies industry best practices in development of procedures and processes addressing quality and reliability standards requirements. 4. Works effectively in a team environment and may assume the role of team leader.5. Provides quality assurance, procedure and standards requirements guidance and recommendations to other employees in support of high quality, timely and cost-effective engineering solutions to technical problems. CIP audit guidance as required.6. Builds knowledge of the organization's reliability and quality procedures and processes.7. Ensures department deliverables exceed all industry standard requirements through development and implementation of uniform processes based on industry best practices. 8. Implement industry best practices in development of efficient review processes and procedure development. Basic Qualifications1. Bachelor's Degree in engineering or science from a college or university accredited by ABET. Candidates with extensive experience and certifications in quality assurance in lieu of the specified degree will be considered.2. Minimum 5 years experience implementing a quality or reliability program, or project management involving engineering projects.3. Engineers with quality or licensing experience with generation, distribution, industrial protection, or system planning will be considered.Preferred Qualifications (some of the following)1. NERC Reliability standards expertise Cybersecurity program implementation expertise.2. Knowledge of Protection & Controls engineering3. Six Sigma Certification4. PMP Certification5. Experience in the energy industry Quality program implementation in a regulated industry such as nuclear or pharmaceuticals.