Protection Engineer
- Location: Knoxville
- Salary: $0 per year
Electrical Engineer with an emphasis on generation station protective relaying. Position will be responsible for the design and engineering for generation station relay replacements/retrofits and new installations. Must be eligible to get PE licensed.
Desired experience includes:
Travel Required
Yes. One or two day site visits. Occasionally provide commissioning support.
Qualifications
Skills
Required
Electrical Engineer
Advanced
Behaviors
Required
Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well
Team Player: Works well as a member of a group
Dedicated: Devoted to a task or purpose with loyalty or integrity
Leader: Inspires teammates to follow them
Motivations
Required
Goal Completion: Inspired to perform well by the completion of tasks
Self-Starter: Inspired to perform without outside help
Preferred
Flexibility: Inspired to perform well when granted the ability to set your own schedule and goals
Education
Required
Bachelors or better in Electrical Engineering.
Experience
Required
5 years: 5 + years of progressive experience as a protection engineer
Licenses & Certifications
Preferred
Prof Engineering (PE)
Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. This position can influence the future of the resiliency, reliability and economic operation of the electric grid. Opportunities to advance into leadership roles are available.Position may include leading or executing the following assignments: Preparation of proposals and scope development, including conceptual designs and execution plansPrepare engineering cost and man-hour estimates and schedulesPhysical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of materialProtection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiringPrepare calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.)Prepare equipment specifications for procurement and/or factory acceptance testingCoordinate design activities with other departments (Civil/Structural, Networks, Transmission Line, etc.)Provide guidance and mentoring to less experienced team membersRegularly meet and correspond with clients or outside personnelPerform quality reviews for other engineers and designersProvide short term field support during constructionSupport business development and marketing initiativesOther areas of involvement may include: relay settings, 3D/intelligent design, or industry/professional technical committee involvement Requirements: Bachelor's degree in Electrical Engineering from accredited program Minimum 3 years related experience (completion of master's degree in related field may be substituted for one year of experience)Completion of FE exam strongly preferredProficiency with National Electrical Safety Code and IEEE / ANSI StandardStrong preference for those with: Excellent written & verbal communication skillsStrong analytical and problem-solving skillsCapability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria
This position ensures high quality of the engineering team's deliverables verifying all documented processes and procedures are followed. These procedures are based on enforceable national standards, PPL and industry best practices and are uniformly applied in system protection. Primary Responsibilities1. Prepares, executes and coordinates the planning, documentation and follow up of Cyber Asset assessments (CSVA, CSV), protective (security) patching and conducts reviews confirming engineering protection and control procedures are delivered.2. Able to work in a variety of functions either in field locations or in the home office, which may include necessary activities ensuring quality processes are implemented in optimization of system/component performance and availability. Verification of in field systems either documenting as left conditions or ensuring new systems meet requirements before in service.3. Applies industry best practices in development of procedures and processes addressing quality and reliability standards requirements. 4. Works effectively in a team environment and may assume the role of team leader.5. Provides quality assurance, procedure and standards requirements guidance and recommendations to other employees in support of high quality, timely and cost-effective engineering solutions to technical problems. CIP audit guidance as required.6. Builds knowledge of the organization's reliability and quality procedures and processes.7. Ensures department deliverables exceed all industry standard requirements through development and implementation of uniform processes based on industry best practices. 8. Implement industry best practices in development of efficient review processes and procedure development. Basic Qualifications1. Bachelor's Degree in engineering or science from a college or university accredited by ABET. Candidates with extensive experience and certifications in quality assurance in lieu of the specified degree will be considered.2. Minimum 5 years experience implementing a quality or reliability program, or project management involving engineering projects.3. Engineers with quality or licensing experience with generation, distribution, industrial protection, or system planning will be considered.Preferred Qualifications (some of the following)1. NERC Reliability standards expertise Cybersecurity program implementation expertise.2. Knowledge of Protection & Controls engineering3. Six Sigma Certification4. PMP Certification5. Experience in the energy industry Quality program implementation in a regulated industry such as nuclear or pharmaceuticals.
Job Summary Under minimal supervision, responsible for support of NERC CIP compliance activities associated substation relaying and associated equipment.This position ensures high quality of the engineering team's deliverables verifying all documented processes and procedures are followed. These procedures are based on enforceable national standards, client and industry best practices and are uniformly applied in system protection. Primary Responsibilities1. Prepares, executes and coordinates the planning, documentation and follow up of Cyber Asset assessments (CSVA, CSV), protective (security) patching and conducts reviews confirming engineering protection and control procedures are delivered.2. Able to work in a variety of functions either in field locations or in the home office, which may include necessary activities ensuring quality processes are implemented in optimization of system/component performance and availability. Verification of in field systems either documenting as left conditions or ensuring new systems meet requirements before in service.3. Applies industry best practices in development of procedures and processes addressing quality and reliability standards requirements. 4. Works effectively in a team environment and may assume the role of team leader.5. Provides quality assurance, procedure and standards requirements guidance and recommendations to other PPL employees in support of high quality, timely and cost-effective engineering solutions to technical problems. CIP audit guidance as required.6. Builds knowledge of the organization's reliability and quality procedures and processes.7. Ensures department deliverables exceed all industry standard requirements through development and implementation of uniform processes based on industry best practices. 8. Implement industry best practices in development of efficient review processes and procedure development. Basic Qualifications1. Bachelor's Degree in engineering or science from a college or university accredited by ABET. Candidates with extensive experience and certifications in quality assurance in lieu of the specified degree will be considered.2. Minimum 5 years experience implementing a quality or reliability program, or project management involving engineering projects.3. Engineers with quality or licensing experience with generation, distribution, industrial protection, or system planning will be considered.Preferred Qualifications (some of the following)1. NERC Reliability standards expertise Cybersecurity program implementation expertise.2. Knowledge of Protection & Controls engineering3. Six Sigma Certification4. PMP Certification5. Experience in the energy industry Quality program implementation in a regulated industry such as nuclear or pharmaceuticals.
Job DetailsDescription We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.Electrical Engineer with an emphasis on power generation. Multi-discipline projects in hydro, gas and fossil power generating facility experience is required. Duke, TVA, Exelon, Dominion or other power industry experience is desired. Desired experience includes low voltage and medium voltage power distribution, motor controls for both low voltage and medium voltage, interfacing industrial processes to DCS and/or PLC systems and the use of power distribution system modeling software (ETAP or similar). Need to be familiar with panel design, and 3D environment.Candidate needs to be a leader, capable of coordinating engineering and design efforts, working within a team, and comfortable being in front of peers and clients leading/conducting meetings. At times job duties will require coordinating with project managers, and client to develop proposal documents and estimates to facilitate bidding on work. Work will mostly center around modifications and upgrades in existing facilities. Experience in relay protection would be a plus.Travel RequiredYes. Occasional one or two day site visits.QualificationsSkillsRequiredElectrical EngineeringIntermediateBehaviorsRequiredTeam Player: Works well as a member of a groupLeader: Inspires teammates to follow themDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellDedicated: Devoted to a task or purpose with loyalty or integrityMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsSelf-Starter: Inspired to perform without outside helpEducationRequiredBachelors or better in Engineering.ExperienceRequired4-10 years: 4-10 years of progressive experienceLicenses & CertificationsPreferredProf Engineering (PE)
Power Systems Stability and Steady-State EngineerWe are seeking a talented and experienced Power Systems Stability and Steady-State Engineer to join our team. As a Power Systems Engineer, you will play a pivotal role in analyzing and enhancing the stability and steady-state performance of our power systems. The ideal candidate should possess significant experience in both stability and steady-state as they relate to power systems.Responsibilities:· Perform comprehensive stability analysis of power systems, including transient stability, voltage stability, and small signal stability assessments.· Conduct steady-state analysis, load flow studies, and power flow simulations to evaluate the performance of the power system under various operating conditions.· Identify potential stability and steady-state issues and provide recommendations for system improvements, control strategies, and operational enhancements.· Collaborate with the planning and operations teams to assess the impact of system changes, such as generation additions, load variations, and network expansions on stability and steady-state performance.· Utilize advanced stability and steady-state analysis software and tools to model and simulate complex power system networks accurately.· Investigate and troubleshoot stability and steady-state-related events, working closely with field personnel and control center operators.· Develop and implement stability control schemes, as well as steady-state control algorithms, to improve the overall dynamic and steady-state performance of the power system.· Stay updated with industry standards, emerging trends, and best practices related to power systems stability and steady-state analysis.· Participate in the testing and commissioning of new power system equipment and control systems to verify their stability and steady-state performance.· Prepare technical reports and documentation, presenting findings and recommendations to stakeholders.Requirements:· Bachelor's degree in Electrical Engineering or related field. A master's degree in Power Systems or a relevant discipline is preferred.· Extensive experience in stability and steady-state analysis as they relate to power systems, including transient stability, voltage stability, small signal stability, and power flow studies.· Proficiency in using industry-standard stability and steady-state analysis software such as PSS/E, PSCAD, PowerWorld, or DIgSILENT PowerFactory.· Strong understanding of power system dynamics, control systems, and protective relaying.· Familiarity with grid codes, regulations, and standards related to power systems stability and steady-state analysis.· Experience with dynamic modeling and simulation of power system components like generators, FACTS devices, and HVDC systems.· Solid analytical and problem-solving skills, with the ability to interpret simulation results and propose effective solutions.· Excellent communication and interpersonal skills to collaborate effectively with cross-functional teams and stakeholders.· Ability to work on multiple projects simultaneously and deliver results within defined timelines.· Professional engineering license or willingness to obtain one is a plus.Join our team and contribute your expertise in both stability and steady-state analysis to ensure the reliable and efficient operation of our power systems. If you are passionate about power systems and possess the required experience, we encourage you to apply for this challenging opportunity.
Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation. Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following: Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English. Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.
Testing, including (without limitation): reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.Performing routine troubleshooting and repair of substation relaying and control equipment. Commission new substations, power equipment, relaying (electro-mechanical, solid state and microprocessor), pilot channel equipment (power line carrier, pilot wire, transfer, transfer trip, fiber optic, CVT’s, line tuners, line traps, etc.), controls and communications equipmentPlanning, scheduling, and completing test activities efficiently, on time, without service interruptionsProviding Project Technical Support to Field Service personnel Qualifications: Minimum of 10 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemesExperience is desirable in any of the following related areas: substation design (including protection & control engineering); substation construction; substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing3 phase power systems; power system protection & control schemes; test equipment; test equipment softwareTest equipment and toll/wiring usage; interpretation of wiring and elementary diagrams; basic test skills to perform duties listed above; basic PC skillsQuickly learn and apply test procedure for various types of substation equipment; communicate effectively with diverse groups, tailoring communication for audience and situationLearn and apply client’s switching procedures and safety measures as require
Engineer II/III - Underground Transmission Line Standards (Hybrid)We love our jobs. That’s right. Love. Every day we go to work filled with passion to be excellent, to creatively problem solve and to innovate. These are exciting days for energy companies, and we aim to shape the future of energy in America. We are looking at all of our work with fresh eyes, retooling everything we do, in every part of the company, to operate more sustainably and to deliver energy more reliably than ever. We are looking for interesting, independent thinkers and doers who can help shape the culture of a forward-looking company that’s proud of its rich legacy.Are you a change agent? Do you think differently? Do you want to fall in love with your job? If you answered “yes,” then read on!We offer a hybrid 3-2 work schedule (three days in the office, two days of teleworking) to accommodate the need for flexibility.At this time, we cannot transfer nor sponsor a work visa for this position.Job SummaryElectric Transmission (ET) Transmission Line Standards department is seeking a motivated Electrical Engineer to support the Company’s evolving transmission grid. The primary responsibilities for this role include the design and development of underground line standards and special applications for ET capital and O&M projects. This is an exciting time to join our team as we are involved in industry-leading projects and initiatives like interconnecting 5000 MW of solar generation in the next 5 years, the first utility-owned offshore wind project in United States federal waters off the Atlantic coast, and the largest data center load growth in the world.• Perform engineering work activities and projects to develop, maintain, and support system-wide standards for underground transmission line applications.• Provide expert technical support to other groups for the application of standard designs.• Ensure the proper utilization of standard designs.• Identify root causes for deviations of standard practices and develop/recommend improvements to existing standards to improve utilization.• Evaluate and recommend new products, applications, and methods considering all stakeholder input to maintain or improve safety, reliability, and efficiency.• Participate in various industry organizations to stay current with best practices.• Perform other duties as requested or assigned. Relocation assistance may be offered to the successful candidate. Required Knowledge, Skills, Abilities & Experience The knowledge, skills, abilities and experience required for entry into this job include the following:• Strong time management skills with the ability to independently plan and organize work assignments.• Strong oral and written communication skills, including technical writing.• Ability to think analytically and solve complex problems.• Equally effective with working independently or in a team environment.• Experience with analyzing cable ampacities for various installations.• Engineering experience with underground extruded and pipe type cable systems and accessories ranging from 69kV through 500kV is preferred.• Experience with geotechnical report evaluation, especially soil thermal properties. Experience with Civil excavation techniques is a plus.• Experience with PLS-CADD software is a plus.• Ability to interpret codes, regulations, and practices. Engineer II:• 3+ years of experience• Bachelor of Science in Engineering degree required. Advanced Degrees may be substituted for years of experience.• Understanding of AC/DC fundamentals, including three-phase power systems is preferred.• Understanding of the engineering principles related to underground transmission cable is preferred.Engineer III:• 5+ years of experience.• Bachelor of Science in Engineering degree required. Advanced Degrees may be substituted for years of experience.• Comprehensive understanding of AC/DC fundamentals, including three-phase power is preferred.• Thorough understanding of the engineering principles related to underground transmission cable is preferred. REQUIRED ENGINEERING CRITERIA: For placement of a candidate in the Engineer job series, the following criteria must be met: Possess a 4-year Engineering degree from an ABET accredited Engineering program based on the year that the Engineering program was accredited by ABET, or Possess a 4-year Engineering degree from an institution outside of the U.S. which is accredited through the country's own Engineering accrediting body under the Washington Accord as a full signatory, and is a degree that was recognized by the country's accrediting body on or after the date that full signatory status was achieved, or Possess a 4-year degree in Engineering (non-ABET accredited), Physics, Chemistry, Math or Engineering Technology and a post-graduate Engineering degree from an institution where the undergraduate degree in the same Engineering discipline is ABET-accredited based on the year the Engineering program was accredited by ABET, or Holds or has previously held a valid U.S. Professional Engineer license.Education RequirementsRequired degree (equivalency not accepted in lieu of required degree): Bachelor's Degree in EngineeringLicenses, Certifications, or Quals Description Working ConditionsCold Up to 25% Energized Wires Up to 25% Heat Up to 25% Loud Noise Up to 25% Office Work Environment 76 -100% Operating Machinery Up to 25% Outdoors Up to 25% Radiation Up to 25% Travel Up to 25%Other Working Conditions Test Description No Testing RequiredExport ControlCertain positions at th companyy may involve access to information and technology subject to export controls under U.S. law. Compliance with these export controls may result in cpmpany limiting its consideration of certain applicants.Other InformationWe offer excellent plans and programs for employees. Employees are rewarded with a competitive salary and comprehensive benefits package which may include: health benefits with coverage for families and domestic partners, vacation, retirement plans, paid holidays, tuition reimbursement, and much more. To learn more about our benefits, click here dombenefits.com. Company is an equal opportunity employer and is committed to a diverse workforce. Qualified applicants will receive consideration for employment without regard to their protected veteran or disabled status. You can experience the excitement of our company – it's the difference between taking a job and starting a career. Top 3 Reasons to Work at Dominion Energy There are many reasons to work at Dominion Energy, but below are the top three employees have shared with us. Click on each of the links to learn more! 1. Safety Centric Work Environment 2. Generous Pay and Benefits 3. Collaborative & Inclusive Culture Our Commitment to NetZero by 2050 We’ve cut carbon emissions from our electric generation business by approximately 46% (since 2005) and methane emissions from our natural gas business by 38% (since 2010) — and we're just getting started. By growing wind, solar, and renewable natural gas and pursuing innovative technologies, we expect to achieve net zero emissions by 2050. We’ve also committed to reducing the emissions of our suppliers and customers — so we can all move forward together. Job Segment: Transmission Line, Thermal Engineering, Testing, Electrical Engineering, Power Systems, Energy, Engineering, Technology
Requirements: Registered Professional EngineerBS/EE related discipline from an accredited four-year college or university12 or more years’ experience, working in the AEC Industry with vast knowledge of Electrical AutoCAD, Revit, NavisWorks (All, or a combination)Strong communication, writing, and organizational skills Experience with lighting software (visual and/or AGI32) Experience in indoor and outdoor lighting design Responsibilities: Manage Budgets, scopes, proposals, and work force allocation.Serves as primary project technical spokesperson and as a designated client contact; coordinates regular plan reviewsPrepares design computations, load, fault current, illumination, voltage regulation and protection device coordination studiesResearch code and regulatory agency issues and coordinates with code/agency officials in resolving project questions/issuesDevelops probable construction cost opinions for his/her projects within the departmentAttends client meetings -- days or nightsAnalyzes reports, drawings, blueprints, and test results to plan and design projectsPerforms field inspections, investigations, and site observations on construction sites; responds to construction issues raised by contractorsPrepares reports, business correspondence and procedure manuals
The Construction Superintendent is responsible for field operations on the assigned project(s) in order to achieve safe, timely and profitable completion of each project. Plans, organizes, and supervises building and related facilities portions of construction work for an assigned area of a construction project. Responsible for the construction planning of the construction related activities of the subcontractor and/or self-perform to confirm the completion of contractual construction activities. Maintains continuity of safety, job progress and maximizes efficiencies related to the assigned area. - Responsible for the oversight of the following project work activities: site earthwork and layout, concrete flatwork and foundation, structural steel, steel and wood framing, interior finishes, millwork, roofing, plumbing, HVAC systems, fire protection, and commercial electrical systems. - Responsible for overall supervision of construction effort, which includes: safety, productivity of crafts, efficient use of materials and equipment, materials management, scheduling, design, and contractual performance of the project. - Responsible for subcontractor contractual compliance and/or self-perform on designated construction related activities. - Build effective client and subcontractor relationships. Interface with client representatives, A/E representatives, and other contractors. - Responsible for managing QA/QC documents, inspection logs, as built drawings. - Support the completion of turnover packages. - Collaborate with project management to develop and implement project procedures, working documents, and standards. - Authorize purchase requisitions, field design change requests, etc., under supervision of Construction Manager and Project Manager. - Responsible for project safety. Reviews and audits site specific safety documentation, including Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis. - Complete daily field reports and take daily pictures to document construction progress. - Assess future work activities and identify any concerns with work plans by utilizing subcontractors 3-week look ahead report. - Develop a marked-up and as-built set of drawings to produce the record set documents, and answer RFIs with assistance from Assistant Project Manager or Field Engineer. - Direct and manage subcontractor or self-preform subsidiaries as necessary to comply with the established project schedule, and track and verify progress on an installed quantity and work hour basis. - Oversee the construction of complete buildings and/or structures. - Develop punch lists of items out of compliance or not completed. - Verify the most current drawing revisions are being used in the field. - Utilize project construction management tool(s). - Read, interpret, and understand civil, foundation, structural, architectural, mechanical, electrical, and plumbing drawings.- Performs other duties as assigned - Complies with all policies and standardsRequirements:- Bachelor Degree and 7 years construction management experience or craft supervision experience on similar projects. Required or - Associate Degree and 9 years construction management experience or craft supervision experience on similar projects. Required or - High School Diploma/GED and 11 years construction management experience or craft supervision experience on similar projects. Required - Must have excellent communication skills, strong leadership skills, and a strong safety background. - Computer proficiency in Microsoft Suite. - Must be able to meet company's driving requirements EEO/Minorities/Females/Disabled/Veterans
Spencer Ogden is currently seeking an experienced Project Engineer to support a water reclaimation plant project in Singapore on a 12 month contract basis to lead and coordinate all engineering activities for assignments starting from Mid February 2024.Contract Details: Start Date: As soon as possibleContract Duration: 12 months from start date with potential for extension.Working Schedule: 5 days a week, 8 hours a day (Mon - Fri)Location: Singapore - Occasional travel to site Main Responsibilites: Site Support: Supporting the lead engineer, provide technical support, documentation, system setupDocumentation and reports: Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed. Requirements: At least 3 years’ experience in DCS project engineering and/or DCS serviceKnowledge and experience in 800xA is an added advantageMinimum with recognized degree or Diploma in Engineering with experience in automation systemsComputer literacy and competency Microsoft office tools.Strong interpersonal, organizational and communication skills.
Produce detailed drawings, plan sets, and volume calculations for various disciplines, including landfills.Maintain constant communication with Project Managers and Senior Engineers regarding project work and designs.Listen attentively and understand inquiries, providing optimal solutions for implementation.Assist in design tasks for all production assignments, conducting research to solve design problems and collaborating with other resources to streamline processes.Develop design concepts and generate project design deliverables based on sketches, written and/or verbal instructions.Exercise judgment and make decisions regarding deliverables and interpretation of input.Ensure that design concepts and deliverables are comprehensive, meeting company or client requirements, applicable codes, and standards.Revise project drawings based on feedback from the Project Manager and/or Engineer.Establish and manage electronic document file structure and naming conventions in accordance with company or client standards.Collaborate closely with Project Managers and Engineers to establish and manage contract and construction drawings.Create and modify base drawings for use in various documents.Work efficiently as a productive team member and proficient AutoCAD user, handling a typical set of project documents from start to finish with professional quality output that adheres to company and client standards.Manage multiple projects simultaneously in different locations and states.Adhere to CAD standards.Conduct a final review of drawings to ensure completeness, clarity, and accuracy.Prepare technical reports, such as operating plans, CQA reports, and permit applications.Analyze technical data using tools like Excel.Apply logic and creativity in resolving design issues.Effectively communicate with colleagues and superiors.Utilize computer-aided design (AutoCAD) software to design landfill projects.Perform construction observation and document findings.