Senior Engineer (Stability and Steady State)
- Location: Pennsylvania
- Salary: $160k per year
Power Systems Stability and Steady-State Engineer
We are seeking a talented and experienced Power Systems Stability and Steady-State Engineer to join our team. As a Power Systems Engineer, you will play a pivotal role in analyzing and enhancing the stability and steady-state performance of our power systems. The ideal candidate should possess significant experience in both stability and steady-state as they relate to power systems.
Responsibilities:
· Perform comprehensive stability analysis of power systems, including transient stability, voltage stability, and small signal stability assessments.
· Conduct steady-state analysis, load flow studies, and power flow simulations to evaluate the performance of the power system under various operating conditions.
· Identify potential stability and steady-state issues and provide recommendations for system improvements, control strategies, and operational enhancements.
· Collaborate with the planning and operations teams to assess the impact of system changes, such as generation additions, load variations, and network expansions on stability and steady-state performance.
· Utilize advanced stability and steady-state analysis software and tools to model and simulate complex power system networks accurately.
· Investigate and troubleshoot stability and steady-state-related events, working closely with field personnel and control center operators.
· Develop and implement stability control schemes, as well as steady-state control algorithms, to improve the overall dynamic and steady-state performance of the power system.
· Stay updated with industry standards, emerging trends, and best practices related to power systems stability and steady-state analysis.
· Participate in the testing and commissioning of new power system equipment and control systems to verify their stability and steady-state performance.
· Prepare technical reports and documentation, presenting findings and recommendations to stakeholders.
Requirements:
· Bachelor's degree in Electrical Engineering or related field. A master's degree in Power Systems or a relevant discipline is preferred.
· Extensive experience in stability and steady-state analysis as they relate to power systems, including transient stability, voltage stability, small signal stability, and power flow studies.
· Proficiency in using industry-standard stability and steady-state analysis software such as PSS/E, PSCAD, PowerWorld, or DIgSILENT PowerFactory.
· Strong understanding of power system dynamics, control systems, and protective relaying.
· Familiarity with grid codes, regulations, and standards related to power systems stability and steady-state analysis.
· Experience with dynamic modeling and simulation of power system components like generators, FACTS devices, and HVDC systems.
· Solid analytical and problem-solving skills, with the ability to interpret simulation results and propose effective solutions.
· Excellent communication and interpersonal skills to collaborate effectively with cross-functional teams and stakeholders.
· Ability to work on multiple projects simultaneously and deliver results within defined timelines.
· Professional engineering license or willingness to obtain one is a plus.
Join our team and contribute your expertise in both stability and steady-state analysis to ensure the reliable and efficient operation of our power systems. If you are passionate about power systems and possess the required experience, we encourage you to apply for this challenging opportunity.
The Senior Electrical Engineer will lead electrical design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities. The Senior Electrical Engineer will lead the project team throughout the design and construction process, adapting electrical plans according to budget constraints, design factors or client needs. Lead electrical design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by the project managers. Prepare electrical equipment: packaged equipment specifications and data sheets, Request for Qualifications (RFQ's), technical bid summaries, and purchase recommendations. Review electrical equipment vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers. Participate in development of project schedule, scope, budget staffing planning and construction planning. Responsible for effective management of change orders. Applies expert knowledge of commonly used electrical concepts, practices, codes and procedures within the electrical engineering services industry. Applies knowledge and experience to complex projects, find non-standard design solutions. Quality review production drawings for a variety of projects and project related data as required by the project managers to verify corrections are made within multiple CAD related software. Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of electrical systems. Leads field inspections, installation, measurements or calculations for public and private clients. Prepare and present technical reports for clients and industry publications. Build effective relationships with existing clients, customers and contractors and develop new business opportunities. Responsible for ensuring customer satisfaction goals and expectations are met. Participate sales and marketing efforts and identify key pursuits. Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance. Prepare and present project budgets and cost estimates. Report project performance. Provide leadership, guidance and instruction to the electrical engineering practice. Mentor and guide less experienced engineers. Responsible for QA/QC process adherence. Responsible for effective communication with other engineering disciplines.
Power System Engineer in Power Flow and Stability (PSSE + TARA) We are seeking an experienced engineer knowledgeable in power flow and stability, with proficiency in PSSE and TARA software. As an integral member of our team, you will be responsible for various tasks related to power system analysis, including analysis and modeling of power flow studies, transient stability studies, contingency analysis, and system stability improvement. Key Responsibilities: - Conduct power flow studies using PSSE software to analyze and evaluate the behavior and performance of power systems. - Perform transient stability studies using TARA software to assess the capability of power systems to maintain stable operation during transient events such as faults or sudden load changes. - Analyze and model power systems, including transmission networks, generators, transformers, and load centers. - Identify and troubleshoot power system issues related to power flow and stability. - Prepare detailed reports and presentations summarizing analysis findings and recommend solutions or corrective measures. - Collaborate with internal teams, such as transmission planning, operations, and maintenance, to ensure the implementation of recommended solutions. - Stay updated with industry trends and advances in power system analysis, particularly in power flow and stability studies. Requirements: - Bachelor's degree in electrical engineering or a related field. - Minimum of 5 years of relevant experience in power flow and stability analysis. - Proficiency in PSSE and TARA software for power system analysis. - Solid understanding of power system theory and operation, including power flow, transient stability, and contingency analysis. - Strong analytical and problem-solving skills to identify and resolve power system issues. - Excellent communication skills, both written and verbal, to effectively convey analysis findings and recommendations to a diverse audience. - Ability to work collaboratively in a team environment and communicate with internal stakeholders. - Familiarity with industry standards and regulations related to power system analysis. - Knowledge of advanced power system analysis techniques and tools is a plus. - Professional certifications in power system analysis or related fields are preferred. - Attention to detail and ability to multitask to meet project deadlines. - Willingness to continuously learn and adapt to new technologies and industry trends. If you meet the above requirements and are passionate about power flow and stability analysis, we encourage you to apply for this position. Join our team and contribute to the efficient and reliable operation of power systems. To apply, please submit your resume, cover letter, and any relevant certifications.
Job Title: Commissioning Engineer - FACTS (Flexible Alternating Current Transmission Systems)Location: Multiple Locations (Europe)About Us: Our client is a leading provider of advanced power systems solutions, dedicated to optimizing energy transmission and distribution networks globally. We specialize in the design, development, and implementation of Flexible Alternating Current Transmission Systems (FACTS) technologies to enhance grid stability, reliability, and efficiency.Job Description:As a Commissioning Engineer specializing in FACTS (Flexible Alternating Current Transmission Systems), you will play a pivotal role in ensuring the successful deployment, testing, and optimization of various FACTS technologies, including STATCOM (Static Synchronous Compensator), Series Capacitors, and SVC (Static Var Compensators). You will collaborate closely with our engineering teams and clients to deliver cutting-edge solutions that address the challenges of modern power systems.Key Responsibilities: Commissioning and Testing: Lead the commissioning process for FACTS installations, including STATCOM, Series Capacitors, and SVC, ensuring adherence to project specifications and industry standards. Conduct thorough testing and performance evaluations to validate system functionality and reliability. System Optimization: Collaborate with design engineers to optimize FACTS configurations for maximum grid stability, voltage control, and power quality enhancement. Implement tuning and control strategies to achieve optimal performance under varying operating conditions. Troubleshooting and Diagnosis: Identify and resolve technical issues and challenges during the commissioning phase. Utilize diagnostic tools and methodologies to troubleshoot equipment malfunctions and operational inefficiencies, ensuring timely resolution to minimize project delays. Documentation and Reporting: Maintain comprehensive documentation of commissioning activities, test results, and system configurations. Generate detailed reports summarizing commissioning procedures, findings, and recommendations for stakeholders and project management teams. Client Collaboration: Foster strong relationships with clients and project stakeholders, serving as a primary point of contact for technical inquiries and support during the commissioning phase. Provide guidance and training to client personnel on FACTS operation, maintenance, and troubleshooting procedures. Health, Safety, and Quality Assurance: Adhere to strict health, safety, and quality standards throughout the commissioning process, ensuring compliance with regulatory requirements and company policies. Implement best practices to mitigate risks and maintain a safe working environment for all personnel involved. Requirements: Bachelor's degree in Electrical Engineering or related field; advanced degree preferred.Proven experience in commissioning and testing FACTS technologies, particularly STATCOM, Series Capacitors, and SVC, within the power transmission and distribution sector.Strong technical knowledge of power systems theory, control systems, and voltage regulation techniques.Proficiency in diagnostic tools and testing equipment used for FACTS commissioning and troubleshooting.Excellent communication and interpersonal skills, with the ability to collaborate effectively with multidisciplinary teams and client stakeholders.Demonstrated ability to manage multiple projects simultaneously and prioritize tasks in a fast-paced environment.Willingness to travel to project sites domestically and internationally, as required. Preferred Qualifications: Professional Engineer (PE) license or equivalent certification.Familiarity with industry standards and regulations governing FACTS technologies and power system operation.Experience with SCADA (Supervisory Control and Data Acquisition) systems and remote monitoring solutions for FACTS applications.Knowledge of programming languages (e.g., MATLAB, Python) for system modeling and simulation.Previous experience in providing technical training and support to clients and end-users. Join us and be part of a dynamic team dedicated to shaping the future of power transmission and distribution through innovative FACTS solutions. Apply now to embark on an exciting career journey in the forefront of electrical engineering and renewable energy integration.
My client is a global leader in energy technology. They are located in 90 countries, they operate across the whole energy landscape. From conventional to renewable power, from grid technology to storage to electrifying complex industrial processes.They are looking to hire a mechanical engineer supporting their manufacturing in Berlin. The role will include but not be limited to: - Acting as an interface between manufacturing/supply management and engineering.- Evaluation of non conformances (QN) and deviation reports of the production segments and their suppliers in terms of design and material-related aspects- Decision on the use, repair or scrapping of the affected components- Development and documentation of repair solutions considering the boundary conditions of the manufacturing and supporting on-time delivery- Participation in Design Reviews providing technical know-how in design and manufacturing- Evaluation and providing technical solutions for product definition errors/manufacturing requests (EECM, BSol)- Mechanical Engineer degree or comparable- Expertise: Design technology, strength calculation, materials technology, manufacturing technology, non-destructive testing methods- Gas turbine knowledge (preferably all frames, all components)- SAP/CAD knowledge- Network within EN (manufacturing/purchasing desirable)- Customer-/ Results-Oriented- High Flexibility / Independent Working- Interested in Production (production-related teamwork)- Languages: German and English
Electrical Testing & Commissioning Specialist is responsible for directing commissioning and testing activities in the field. This position is responsible for providing commissioning and testing solutions. Prepare and recommend testing & commissioning solutions to the Project Manager or client. Delivers solutions to Project Manager or Senior Engineer to address future client needs and provide cost analysis on testing solutions. Ensures the performance of all field testing on substation equipment is completed accurately and safely. Performs demonstration tests, as required, which are a series of functional tests designed to simulate real world conditions to ensure proper operation of yard equipment. Develops and executes substation equipment test procedures. Provide technical instruction, mentoring, guidance with regard to substation systems and electrical power systems to field testing technicians. Develop testing & commissioning departmental and project requirements. Ensure compliance of testing QA/QC process. Regularly meet and correspond with clients and outside personnel with responsibility to act independently on technical matters related to testing & commissioning. Manages marketing efforts for key pursuits. Consults with clients on testing and commissioning projects. Maintains client relationships with client field personnel. Other duties as assigned.
Lead Field Service Engineer Rotating Machines, Reduction gears and TurbinesRole Summary:The Lead Field Service Engineer (FSE) will provide technical direction for overhaul, repair and maintenance of equipment consisting of: marine and industrial gear sets; and motor and generator bearings to customer repair teams. You will report to the FSE Manager and manage work items to support customer and internal requirements.Essential Responsibilities:As Lead Field Service Engineer you will:· Perform technical service for safe and successful overhaul, repair and maintenance on marine main reduction gears, industrial gears, attached drives, alignments, motor and generator mechanical equipment. This will include providing technical direction to skilled labor performing work on customer sites to assure the executed work reflects the technical requirements and quality standards of the service request;· Knowledge and ability to execute electrical tests in MV AC Electrical Motors and Generators: Insulation resistance, Winding resistance, voltage drop test, transformation ratio.· Knowledge and ability to perform tests and inspections: Borescope inspections, Neutral zone adjustments, brush and brush holders' tests and adjustments, commutation inspection (surface condition, sparkling conditions, etc.).· Knowledge and ability to perform motors & generators Start-up/Commissioning: Static tests, operational tests (temperature elevation, vibrational tests, electrical parameters, etc.).· Knowledge and ability to execute assembly/disassembly of electrical components such as cables, capacitors, rtd´s, surge arresters, fan motors, CT´s, TC´s, winding (coil assembly, parts insulation, etc.), etc.· Effectively communicate internally and with customers and skilled labor the job-planning requirements (including risk assessment, and technical requirements) that define in detail the operations to be performed through your review of the job requirements, engineering procedures, drawings, schedules, and process instructions;· Prepare timely and accurate timesheets, expense account statements, and professional reports.· Knowledge and ability to execute mechanical inspections in Large and Medium electrical rotating machines (motors & generators): Dimensional control Sleeve & roller bearings, air-gap inspections, metrology skills, etc.· Knowledge and ability to perform shaft alignments: Flexible and solid couplings, Motor - Gear box / Load machines, Generator - gear box / turbine;· Knowledge and ability to execute assembly/disassembly of mechanical components, machine parts such as rotor, stator, covers, heat exchanger, sleeve bearings, roller bearings, couplings, mechanical seals, etc.;
Job Summary:This position has single point accountability for the projects they are executing. They will be under the general direction of a Sr. Project Manager. This position is responsible for the management of all phases of project planning and execution to ensure all project success factors are met, including but not limited to scope, schedule, cost, quality, environmental, safety, communications, security, and integration. In addition, this position is highly involved in the funding management and budgeting of the project / program responsible. This position will work directly with a full project team on a daily basis that includes Project Controls, Construction Management, Engineering, Real Estate, Environmental, Permitting & Community/Public Engagement to name a few. This position typically will be assigned projects classified as "Green " per the Project Management Center of Excellence Project Profile Matrix. Green projects typically range from $50 to $250M with a moderate to high level of complexity. These projects typically involve complex but mature technology, moderate scope complexity, and stakeholders that include facility and department level personnel in addition to Senior Management, and possibly the Board of Directors and External Agencies. The PM serves as the unifying agent providing leadership, management, direction, coordination, and control of the overall project in accordance with the established policies, procedures, systems, and requirements. Responsibilities and Duties: Describe the major responsibilities and significant job duties required to successfully perform each responsibility. Indicate the approximate percentage of time spent on each responsibility during the year by order of overall importance or impact. 25% Establish and maintain communications among all project/programs stakeholders. Structure, lead, and/or assist in leading all project related meetings and reports required to ensure open communication between all team members, key stakeholders, and management (regular project reviews, kickoff meetings, weekly reports & monthly reports) and to properly report project status. Assure that Project Plan, all appropriate reports and reporting means are developed and managed according to PMCoE Standards. Coordination with the various internal and external organizations that are providing services to the project (development, engineering, project controls, estimating, construction management, supply chain, legal, EHS, QA/QC, operations, communications, regulatory, security, fuels, transmission, etc.). The PM manages all matrixed members of the team on a daily basis and is responsible for assuring all project deliverables (KPIs) are being met. 40% Plan the project (s) assigned to, including scope, schedule, cost, safety, and quality aspect of the project. Drive the process of project planning including scope definition, estimating, schedule formation and monitoring, cost control measures, procurement/contracting strategies, equipment selection, vendor selection, start-up and commissioning plans, and integration processes. This includes project planning and execution activities like scope definition, detailed design, construction, start-up and commissioning, turnover to operations, and warranty management. 25% Execute projects according to Plan within designed scope, cost and schedule limits. Includes objectives, stakeholders, scope, roles and responsibilities, assumptions and constraints, deliverables, WBS, schedule, external communication, regulatory strategy, procurement strategy, contractor and supplier strategy, resource plan, budget, lessons learned, risk plan, quality plan, safety plan, environmental plan, security plan, integration plan, data management plan, communications and reporting plan, change management, and project close out. 10% Effective Presentation Skills. Ability to create, develop and deliver project / business case presentations to Senior Management / project sponsors.
As a project engineer for construction, you will be an integral part of the project team to bring my client "Transformation of Energy" projects to a successful project completion. These are international Engineering, Procurement and Construction (EPC) projects for High Voltage Alternate / Direct Current projects (HVAC and HVDC), combined cycle power plants (CCGT), hydrogen projects (H2) and hybrid solutions.You will shape the future of the client in technical interactions within your project with external partners (customers, engineering firms, authorities, construction companies, etc.) as well as with your internal partners (building technology, project management, purchasing, etc.)You will prepare tender documents for construction and engineering services and lead the technical award negotiations up to the conclusion of the contractYou will coordinate the entire construction planning and ensure that the requirements of the customer and the technology are considered.You will coordinate and manage all contractors involved in the constructionYou will monitor and be responsible for the deadlines, costs and quality of the entire construction processQualifications:- University or technical college degree in the field of civil engineering, ideally completed semester abroad or internships abroad- Several years of relevant professional experience in industrial and plant engineering. Applications with initial work experience are also welcome.- Good expertise in all areas of civil engineering as well as good handling of MS Office tools, ideally iTwo- Fluent in German and English as well as ideally knowledge of other languages (French, Italian, Spanish)- Ability to work in a team, assertiveness, initiative, communication skills as well as planning and organizational skills- Willingness to travel worldwide
Work Authorisation & Permit to Work Manager - working alongside an industry leading client on a nuclear power plant project. Job Duties Supervise daily permit office operations to ensure compliance with established processes and standards.Foster and maintain relationships with construction, safety, and technical teams, delivering crucial performance data.Contribute to the creation and maintenance of innovative procedures and standards.Facilitate effective communication with senior management.Ensure the competency of permit acceptors and oversee training programs.Generate audit reports, identify non-compliance issues, and implement corrective actions.Review and adjust standards, policies, and procedures as necessary. Requirements:- Degree in Mechanical or Electrical Engineering or similar- NEBOSH Diploma or equivalent.- IOSH Managing Safely in Construction.- Proficient in managing diverse construction projects and coordinating contractors.
Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation. Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following: Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English. Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.
We are currently seeking a self-motivated and passionate Electrical Engineer to join our team. In this role, you will serve as the engineering support for our Distribution System Operations (DSO) department, contributing to the growth of this exciting engineering field. We are in search of candidates ready to take on influential roles within our team. Ideal candidates will have a background in electrical engineering.This is a hybrid-remote position, reporting to either our Cedar Rapids, IA or Madison, WI office. Candidates must be residents of Iowa or Wisconsin.What You Will Do: Collaborate with engineering and operations teams to plan, implement, and support distribution grid programs, projects, and initiatives using various platforms, including: SCADA (Supervisory Control and Data Acquisition)ADMS (Advanced Distribution Management System)OMS (Outage Management System)DERMS (Distributed Energy Resources Management System)FLISR (Fault Location, Isolation, and Service Restoration)VVO/VVC (Volt-VAR Optimization and Volt-VAR Control) Work with internal and external stakeholders to develop recommendations for enhancing operating tools, situational awareness, and overall distribution system performance and reliability. Collaborate with field operations, engineering, IT, and transmission partners to provide long-term grid operations support, including electric and gas distribution system strategy, analysis, implementation, operation, and maintenance of complex technology systems. Maintain the data necessary for ADMS, DERMS, and other power system platforms. Collaborate with cross-functional teams to rectify errors between systems and provide feedback on recurring issues for new project analysis and scoping. Develop an understanding of customer needs and expectations and propose solutions for moderately complex issues. Participate in identifying and solving problems within the assigned area of responsibility with guidance from a supervisor. Apply governmental and organizational engineering standards, interpret policies, and exercise discretion and judgment in resolving moderately complex problems. Demonstrate critical thinking and communication skills necessary for developing recommendations that offer technically sound and cost-effective solutions to specific problems. Education Requirements: A Bachelor's Degree in an engineering program accredited through the Engineering Accreditation Commission is required. A Bachelor of Science in Electrical Engineering degree is preferred. Required Experience: 2+ years of related engineering experience.
ESSENTIAL FUNCTIONS Lead engineering staff and external suppliers according to Company policies and procedures to effectively achieve Company and department objectives. Develop employees by training, cross training, and providing continuing education opportunities. Conduct performance reviews and provide input for salary decisions.Develop engineering designs and related system drawings for applications and project installations including the development of specifications for hardware and software.Lead supplier and sourcing efforts of the division including product development, design and acceptance testing to ensure the division a consistently competitive and compete line of display products.Act as primary liaison between the Division and overseas factory on product and system related matters.Develop and maintain factory acceptance testing of all product orders to ensure delivery within Company's specification and standards. Ensure engineer staff are properly trained and certified on quality procedures.Identify and present recommendations for improvement or change in strategy, policy, product and/or procedures, including those related to product development and product launch.Create and maintain bill of materials (BOMs) and production documentation for projects and Company's manufactured assemblies and subassemblies within the Syteline system.Create, implement and maintain product and technical training for DVD personnel. Maintain and manage the testing, training and customer demonstration facility for the Division.Manage engineering resources to provide on-site engineering and commissioning of new display systems and on-site engineering support.Provide engineering resources to assist with advanced product service support and resolution of warranty issues to meet the Division's customer commitments.Manage the Division's parts repair and depot service including inventory management, policies and processes.Lead the Division's quality efforts including the management of the Quality Reporting System (QRS) and maintenance of quality policies and procedures.Collaborate with the General Manager and other departments on the development of go-to-market strategies for new product launches.Further the goals and positive, professional image of the Diamond Vision Department by assisting in the creation of marketing materials, plans, and strategies. QUALIFICATIONS Bachelor's Degree in Electrical, Electronic Technology, or Computer Engineering, with a minimum 10 years of relevant large-scale video systems experience and a minimum 5 years of management experience, or equivalent education and experience.Advanced knowledge of large-scale video systems, video production systems, video/computer display systems.Intermediate knowledge of commercial, structural and electrical construction techniques.Advanced analytical and problem-solving skills.Advanced interpersonal, communication and presentation skills required to communicate with customers, employees and vendors.Ability to work in a team environment and on several projects simultaneously.Ability to read, understand, and create technical drawings and materialAdvanced computer experience with emphasis on Microsoft Office applications and computer aided drafting software.