Job details

Location
Singapore
Salary
Market related
Job Type
Contract
Ref
247900
Posted
3 months ago

Spencer Ogden is currently seeking an experienced PLC Programmer to support a water reclaimation plant project in Singapore on a 12 month contract basis to lead and coordinate all engineering activities for assignments starting from Mid February 2024.

Contract Details:

  • Start Date: As soon as possible
  • Contract Duration: 12 months from start date with potential for extension.
  • Working Schedule: 5 days a week, 8 hours a day (Mon - Fri)
  • Location: Singapore - Occasional travel to site

Main Responsibilites:

  • Site Support: Supporting the lead engineer, provide technical support, documentation, system setup and programming PLC Systems
  • Documentation and reports: Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed.

Requirements:

  • At least 3 years’ experience in DCS project engineering and/or DCS service
  • Knowledge and experience in 800xA is an added advantage
  • Minimum with recognized degree or Diploma in Engineering with experience in automation systems
  • Computer literacy and competency Microsoft office tools.
  • Strong interpersonal, organizational and communication skills.

Similar jobs.

View all
Renewable Energy Careers

I/C Elecrical Engineer

  • TypeContract
  • Salary$0 per year
  • LocationBasking Ridge

  Summary The Senior Electrical Engineer I&C will provide Instrumentation and Controls (I&C) and Electrical engineering supports to proposal and contract project operation across Boiler, Selective Catalytic Reduction System (SCR), Air Quality Control Systems (AQCS), Wastewater Spray Dryer (WSD), Flue Gas Desulfurization Systems (FGD), Turbine and After Market Service areas. These include generating documents and/or furnishing consultation in engineering calculations and analysis. I & C equipment specifications, technical evaluation, analog and digital control logic diagrams, combustion control system (CCS) & burner management system (BMS) philosophy, process control and alarm set?point list, analytical instruments, loop diagrams, Piping and Instrumentation Diagrams (P&ID), process flow diagrams (PFDs) review, Instrument List, IO List, and ISA format Data Sheets, etc. Electrical equipment specifications, technical evaluation, cable block diagrams, electrical control schematics, interconnection wiring diagrams, one-line diagrams, electrical load list, electrical area classification, and P&IDs & PFDs review. Excellent understanding and knowledge of I&C / Electrical Engineering for power plant environment. Must have a thorough understanding of Codes and Standards related to Power Plant design and installation.  Essential Duties & ResponsibilitiesEssential duties and responsibilities include, but are not limited to the following:  Develops major Instrumentation and Controls engineering specifications, bid evaluations, and vendor document/drawing reviews for equipment (i.e., Distributed Control System (DCS), Programmable Logic Controller (PLC), CEMS/NOx Monitoring System, Analyzers, Vibration Monitoring System, Fabric Filter Cleaning Control System, Transmitters, Thermocouples, Control Valves, etc.Prepares and reviews engineering calculations, P&IDs, control system narratives and control system architecture, operator interface layout, instrument connection and installation details, location drawings and technical specificationsGenerates DCS Graphic drawings and control logic diagram using SAMA/ISA format for BMS/CCS controls for Boiler and Burners, AQCS, SCR, WSD, FGD, etc. Develops major electrical engineering specifications, bid evaluations, and vendor drawings reviews for equipment (i.e. Medium & Low Voltage Motors (per NEMA MG1), Power Transformers, Switchgear, Motor Control Centers, UPS and VFD Systems, and Pre?Engineered Power Distribution Centers (PDC), and Equipment Layout. etc.Prepares and reviews engineering calculations, one?line diagrams, schematics, block diagrams, wiring diagrams, load list, hazardous area classification (per NFPA 496 & 497), cable schedules, cable tray routings, lighting layouts, panel schedules, grounding layouts, heat tracing, lightning protection layouts, and other electrical layout drawings and specifications as requiredEnsures that I&C / Electrical design & engineering deliverables are delivered per contract specifications, and within budget and schedule as lead engineer, if assignedReviews I&C / Electrical related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment manufacturers or subcontractor’s and prepares comments and recommendationsCoordinates all I&C / Electrical engineering interfaces with other discipline and client as lead engineer, if assignedPrepares I&C / Electrical engineering work plans/progress report and monitor man?hours as lead engineerEnsures work products meet all applicable local and industry codes, standards and regulatory guides specifically NFPA, NEMA, ASME, ISA, etc.Able to review and understand DCS and PLC configuration drawingsAble to support and execute multiple proposal and contract as project discipline engineer with minimum supervisionPerforms I&C / Electrical related equipment inspection FAT Conducts field survey as deemed required  Other Duties & Responsibilities Provide supports in developing I&C / Electrical engineering standards and practicesPossess excellent analytical, decision making, planning and organization skillsMust possess excellent leadership skills with the ability to lead others, provide coaching, development and mentoring of subordinatesAbility to travel both within the USA and to other countries, as deemed necessaryFoster a teamwork environmentCommunicate effectively with all levels of employeesAbility to work independently and with othersContinuously seek ways to improve processes to reduce man?hoursOrganize, maintain and control the status of electrical documents & drawings in PWMaintain the highest degree of honesty and integrity at all times  Knowledge, Skills, & EducationTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Must have a Bachelor's degree (BA) in Electrical or Mechanical Engineering from a four?year accredited college or university. Candidate shall have a minimum fifteen (15) years’ experience in Instrumentation & Controls / Electrical engineering and design. Post?graduate education is desirable and will be credited as working experience. Excellent understanding and knowledge of industry codes and standards (ANSI/ISA?5.1, NFPA/NEC, IEEE, NEMA) as they relate to the Power Plant. Candidate shall have strong leadership, communication and presentation skills.Language Skills: Candidate must be fluent in English.  Strong verbal and written communication skills and interpersonal skills. Must be able to interact and communicate well with individuals in all areas of the company.Mathematical Skills: Candidate must possess the necessary mathematical skills required to perform the work and responsibilities described herein.Reasoning Ability: Ability to exercise good judgment and make sound engineering decisions. Ability to interpret an extensive variety of technical instructions in mathematical or schematic form. Computer Skills: Candidate must literate in using common MS Office software including Word, Excel, Outlook, PowerPoint and Access. Knowledge of graphics, technical diagrams, flow charts, etc.

Renewable Energy Careers

Electrical Engineer

  • TypeContract
  • Salary$0 per year
  • LocationKnoxville

Job DetailsDescription We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits.  Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.Electrical Engineer with an emphasis on power generation. Multi-discipline projects in hydro, gas and fossil power generating facility experience is required. Duke, TVA, Exelon, Dominion or other power industry experience is desired. Desired experience includes low voltage and medium voltage power distribution, motor controls for both low voltage and medium voltage, interfacing industrial processes to DCS and/or PLC systems and the use of power distribution system modeling software (ETAP or similar). Need to be familiar with panel design, and 3D environment.Candidate needs to be a leader, capable of coordinating engineering and design efforts, working within a team, and comfortable being in front of peers and clients leading/conducting meetings.  At times job duties will require coordinating with project managers, and client to develop proposal documents and estimates to facilitate bidding on work. Work will mostly center around modifications and upgrades in existing facilities. Experience in relay protection would be a plus.Travel RequiredYes. Occasional one or two day site visits.QualificationsSkillsRequiredElectrical EngineeringIntermediateBehaviorsRequiredTeam Player: Works well as a member of a groupLeader: Inspires teammates to follow themDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellDedicated: Devoted to a task or purpose with loyalty or integrityMotivationsRequiredGoal Completion: Inspired to perform well by the completion of tasksFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsSelf-Starter: Inspired to perform without outside helpEducationRequiredBachelors or better in Engineering.ExperienceRequired4-10 years: 4-10 years of progressive experienceLicenses & CertificationsPreferredProf Engineering (PE)

Renewable Energy Careers

Principal Consultant - HVDC Engineering

  • TypePermanent
  • SalaryMarket related
  • LocationLondon

My client is currently resourcing for a Principal HVDC Engineering Consultant. They are a global energy consultancy, powered by the expertise and experience of it's unique and diverse people. They unite to solve the energy industry's problems. Working collaboratively with their customers, rethinking how things are done to take on challenges, break down barriers, enable progress and deliver the energy transition. They bring energy, insight, and certainty, which when combined with their strategies, innovations, and knowledge, gives them the power to create change within the industry and really make a difference.TeamWithin the Renewables Team, my client is at the forefront of major international projects where they bring a unique, integrated perspective, specialist expertise and set of tools to advise and support offshore developers, governments, sector enablers and the wider supply chain on strategic, technical and commercial matters predominately in relation to offshore wind, interconnectors and subsea cable projects.RoleSitting within the Offshore Renewables Team, the Principal Consultant - HVDC Engineering will report to the Renewables Engineering Manager and will be accountable for the delivery of assigned HVDC engineering projects. You will be expected to provide technical expertise into ongoing projects, bids and proposals and to represent the company at client and stakeholder meetings as required.Primary Roles & Responsibilities Include Lead and provide HVDC engineering input into tenders and project deliverables.Liaise and collaborate with internal stakeholders such as TA's, SME's and other discipline Engineers.Support HVDC engineering deliverables such as early-stage feasibility studies, preparation of project specifications, design review and assurance, attend site for FAT's and pre commissioning and commissioning oversight.Provide HVDC technical guidance and advice to clients through project development, delivery and operations & maintenance. Requirements A Chartered Engineer with demonstrable HVDC engineering expertise and ideally experienced in the offshore sector and with a detailed understanding of engineering deliverables through project development, delivery and operations & maintenance.Be a recognised expert in industry with a detailed understanding of HVDC performance requirements, OEM equipment, installation and commissioning and associated UK National Grid and other European transmission standards.Ability to communicate at all levels in the organisation and to key stakeholders out with the organisation.An ability to interpret and manage multiple projects simultaneously whilst meeting programme requirements.Have an interest to actively develop external (client) and internal relationships and be prepared to take part in industry working groups such as CIGRE, IET and other professional bodies. Base LocationAberdeen, Edinburgh, Glasgow or London