- Location: Malaysia
- Salary: Market related
The ideal candidate for Senior Electrical Engineer will be responsible as the Technical Support Engineer to facilitate asset reliability and ensures uptime of the vessels; in line with the Company's key business goal.
- Provide drilling fleet technical support
- Assist and lead on technical downtime issues
- Liaise with OEM's
- Involved with annual equipment inspection
- Review vendor quotations and costings for major equipment repair. Prepare overhaul work-scope for major equipment to ensure OEM correct and accurate pricings on repairs and overhauls
- Prepare repair work-scope for capital equipment (5 yearly)
- Regularly review, development and updating of the planned maintenance system (Star) for electrical equipment
- Travel offshore to assist in technical problem solving, repairs & troubleshooting as required
- Assist with annual budget preparation for capital equipment expenditures
- Assist with and ensure compliance of TMOC procedure
- Attend equipment D&I/commissioning at vendor facility
- Assist with client related technical issues
- Carry out rig internal technical audits
- Assist Projects/Newbuilds Engineers
- Assist HOD with the design and implementation of troubleshooting guides
- Participate in duty phone roster system for technical issues outside office hours
- Be familiar with all systems, directives and procedures and actively participate in the implementation
- Be familiar with all electrical rig systems and controls fleet wide
- Be prepared to travel worldwide at short notice as and when required
Candidate should fulfil the following:
- Preferably a Degree in Engineering (Hons) in Electrical & Electronics
- Minimum 10 years of experience holding the role of technical support and/or project engineering in O&G industry
- Trained in the following: LTI Driller/ Draw works Control Course; LTI Top Drive Control Course; Advance Siemens PLC STEP 7 Programming Course; Siemens & ABB VFD Course; Siemens PLC STEP 7 Programming Course; TDS- 8SA Top Drive Course; C++ Programming; MD Totco Drilling Instrumentation Course; Ex Certified; NOV Amphion Control System; HVAC Certificate
- Experience in offshore drilling or upstream industry with hands-on experience in drilling systems is a plus
- Highly skilled and efficient trouble shooter
- SalaryMarket related
Key Responsibilities: To be the technical lead on HV projects; providing engineering solutions for all aspects of grid connection and customer side installations, from conception through detailed design to construction, energisation and handover. The role includes directly undertaking and/or managing sub-consultants performing the following: Preparing primary substation design layoutsBusbar system calculations, thermal & mechanical loadingSecondary design including preparation of control & protection schematicsAuxiliary AC & DC system sizing and specificationProtection coordination studiesLightning protection, protective shielding, earthing designWitness of factory & site acceptance testingInterface engineering with TSO/DSOSpecification and procurement of major items of electrical plantDesign review of work undertaken by other engineers on the team The role will also include: Engineering elements are delivered on time and within budgetEnsuring health and safety considerations and regulations are considered and incorporated at all stages The mentoring and development of more junior staff Qualifications, Skills, and Experience: A primary degree in Electrical Engineering is not a pre-requisite but is desirable.3 years similar experience is desirable.Previous experience with MV/HV design, HV substation and underground cable design is desirable.Previous experience with grid connections / renewable energy / airfield works is an advantage.Strong IT skills with Microsoft Office packages, including diagnostic skills, and familiarity with Auto-CAD and ePlan P8 or similar is preferred.
- Salary£50 per hour
ICS / MENSA project DUTIES & RESPONSIBILITIES: • Responsible for the delivery of agreed modules within a project (PLC, SCADA, Testing, Networking, Documentation, Hardware design etc) • Work as directed by the Senior/Lead Engineer and Project Manager • Responsible for meeting the technical and quality requirements of project • Ensure project adherence to company quality processes and procedures • Identify project opportunities and variations • Support the Project Manager in identifying and managing risks and issues • Identify and enable use of reusable modules by standardisation and modularization of systems where appropriate • Provide Health and Safety leadership by example • Develop project modules. (Modules as identified in the design – PLC code modules, SCADA, scripts, Mimics, comms drivers, etc.) • Report on progress of all assigned activities to Senior/Lead Engineer or Project Manager • Identify any deviations from agreed functionality or scope and notify Senior/Lead Engineer or Project Manager • Peer review documents created by the project team or other teams as required • Undertake site surveys as required • Support outline design, upfront design studies and requirement definition for clients • Develop FDS and DDS • Develop test specification & design testing methodology • Development of site work documentation (Risk assessment, method statement, site test documentation) • Develop O & M documentation • Undertake full integrated system testing, CFAT, SAT and installation • Undertake observations, variation and reworks as well as packing and shipping of the system • Undertake site installation and retesting • Provide warranty support as necessary QUALIFICATIONS & EXPERIENCE: • Experience of the full project life cycle from system specification through design, development, testing and on-site commissioning is essential • Hands on experience of PLC and SCADA systems • A good appreciation of Control panels, electrical installation and Instrumentation solutions • A Degree or HND/HNC in Electrical / Electronic Engineering, Control Systems or relevant discipline • Incorporated Engineer or working towards professional registration • Experience of some or all of the following is desirable:
- SalaryMarket related
- LocationUnited Kingdom
As part of my clients ongoing development, they are now seeking to complement their growing Technology Services team with experienced Senior and Principal Power Systems Engineers. This role is highly important in ensuring the business continues to thrive and grow, always with a view to their passionate aspiration of supporting the world’s transition to net zero. The Technology team operates across a broad range of projects from single wind turbine installations and onsite generation to multi-GW offshore generation, grid and private wire projects. You will liaise with power systems and engineering design teams and work closely with the Head of Development, Project Management and the Director of Technology Services, to refresh and enhance systems and practices.DUTIES AND RESPONSIBILITIESYour role will focus primarily on: Engaging with the electricity transmission, distribution companies and the Electricity System Operator in the UK.Understanding of the UK Grid Code and specifically application of the requirements to generation projects.Practical experience conducting detailed power system studies including load flow, short circuit analysis, fault ride through and EMT using industry standard software solutionsSharing your knowledge and experience with the team to further develop the team’s expertiseManagement and mentoring of graduates/consultants.Understanding, communicating, and analysing energy regulatory framework and keeping abreast of changes and impacts to clients.Developing business relationships with companies and co-professionals that will provide new opportunities for the business to provide our range of services. PERSON SPECIFICATION Degree qualified in a relevant discipline (e.g., Electrical or Mechanical engineering) or equivalent professional experience.Experience in, or willingness to learn client management and development of longstanding client relationships.Experience in, or willing to learn the financial management of projects, meeting strict timelines and budgetsCommercial awareness of the energy industry.Good working knowledge of the full lifecycle of regulatory framework for connection renewable projects to the grid for both Transmission and Distribution projectsExperience of dealing with Ofgem would be an advantageExperience in the Offshore and Onshore renewable energy sector and knowledge of the oil and gas sector would be an advantage. LOCATION: Remote (Edinburgh. Glasgow, London and Bristol)
- SalaryMarket related
My client are a full-service, utility scale, solar and storage developer bringing projects from origination through development. The company has a portfolio of projects in late-stage development totalling 6GW solar and 3GW storage across three key markets of the UK, Australia, and Ireland. As of 2022, they agreed to sell the UK’s largest solar PV transaction to date consisting of a portfolio of 12 projects with a combined capacity of 519MW of projects including 70MW of collocated energy storage capacity to Scottish Power Renewables (UK) Limited, a wholly-owned subsidiary of global utility Iberdrola Group. Responsibilities: Establish and lead a team of electrical design engineers to design and deliver efficient connections for the clients portfolio of solar and storage assets.Undertake primary and secondary electrical design for 33 kV and 132 kV solar and storage connections across the UK. Engage closely with DNO’s to ensure timely approval of contestable designs in accordance with each DNO’s functional specifications.Lead the partial and full NERS accreditation processes to obtain ICP status for electrical design. Lead the establishment and development of the necessary tools and templates required to efficiently undertake ICP designs to a standard acceptable by DNOs.Co-ordinate the implementation of a best practice management system for undertaking electrical designs in compliance with the NERS standard. Manage the engagement of specialist consultants to establish the necessary policies and procedures as well as external NERS auditors to achieve and maintain accreditation.Apply your electrical engineering knowledge to undertake primary and secondary electrical designs for contestable grid connections for solar and storage using industry standard software programmes (AUTOCAD, CDEGS, PowerFactory, ETAP etc.), automating time consuming processes where possible.Provide engineering support to the project development team to ensure efficient and cost-effective grid connection strategies are pursued for solar and storage projects.Develop and foster close working relationships with DNO’s to collaborate and negotiate on grid connection options, costs, and timelines and achieve successful outcomes in contestable design review processes.Manage a database of grid connection costs for primary, secondary, and auxiliary electrical equipment associated with the connection of solar and storage projects to assist in financial modelling for prospective projects.Support the delivery of the project pipeline to energisation by providing electrical engineering guidance throughout the design, procurement, construction, and commissioning phases. Requirements: Degree in electrical engineering or similar.Technical understanding of the primary and electoral design and of high voltage grid connections for generation connections.Proven track record in undertaking ICP designs in the UK (5+ years).Proficient in electrical design software packages (AUTOCAD, PowerFactory etc.)Knowledge of the technical characteristics of utility scale solar PV and Battery Energy Storage Systems (BESS) is desirable.Ability to communicate with DNOs to achieve positive project outcomes.Excellent inter-disciplinary communication and presentation skills.Ability to manage relationships with multiple stakeholders effectively.Strong focus on Health, Safety & Environment.Chartered/Incorporated status is desirable. This is a hybrid role. Attendance at the London office will be required 3 days minimum per week and occasional travel to the main hub office in Dublin is expected.
- Salary$0 per year
Senior Mechanical EngineerPiping Design ExperienceOil & Gas Experience Pipe Stress AnalysisKnowledge and Experience with Gas Pipelines, Pressure Vessel and Tanks8 years + experiencePerth or Adelaide based - Interstate candidates will be consideredOffice based role8 hours daysMonday - Friday$940/day + Super. Based on an initial 12 month contract - Ongoing.email@example.com
- SalaryMarket related
The ideal candidate for Senior Mechanical Engineer will be responsible to lead the planning, execution, monitoring and control of the maintenance of assets; in line with the Company's key business goal. Provide daily technical support to rigs under remitAssist with technical downtime issuesLiaise with OEM's as requiredTravel offshore to assist in technical problem solving and troubleshooting as requiredAssist with technical audit function in relation to maintenance and technical proceduresAssist with PM development as requiredAssist with annual budget preparationAssist with offshore minor projects and rig modificationsAssist rigs in follow up to ensure compliance with Technical MOC procedureAssist with follow up on onshore equipment repairs as requiredAssist with client related technical issuesCarry out rig familiarisation visitsAssist with Project Engineers when requiredAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all rig mechanical systems and controls fleet wideBe prepared to travel worldwide at short notice when requiredLead safety by example for all employees to followPromote safety awareness and safe work practice among all the personnelReport all hazards and positively intervene in all observed unsafe actsParticipate in emergency drills, including post-drill debriefs Candidate should fulfil the following: Preferably a degree in Bachelor of Engineering (Hons) in Mechanical and minimum 5 years' experience in technical support and or project engineeringFamiliar with computerised control systemsExperience on /with Offshore Drill Rigs and Rig equipment and TroubleshootingSound knowledge of rotating equipmentSound knowledge of hydraulic controls and systemsTrained in Mechanical trade or engineering degree
- SalaryMarket related
My client are currently looking for an experienced grid engineer to join their established team in Dublin. The client is one of Europe's most experienced wind energy developers and has successfully developed renewables projects with over 3,500MW of rated capacity to date. Specific Responsbilities: To work closely connected both with the project development teams in Ireland and Germany· Interacting with grid regulation authorities and grid operators in their role as project stakeholders.· Providing input for Pre-feasibility studies and technical risk assessment.· Developing and optimising grid connection solutions for wind, solar and energy storage projects.· Seeking alternative network access solutions based on grid studies, including technical, legal and commercial evaluations.· Representing the client on industry grid policy committees / working groups, applying learnings from these forums and providing regulatory advice to the strategic aims of the company in both jurisdictions.· Preparing grid applications and managing the grid application process.· Supporting project tendering and acquisition processes by creating technical documents and checking documents issued by others. To work closely connected both with the project execution teams in Dublin and Wiesbaden offices· Preparing requests for quotation for engineering, construction, procurement and testing of the electrical balance of plant for renewable and / or sustainable energy projects.· Creating, checking and or reviewing technical documents according to our company wide workflow procedure.· Preparing inspection and test plans and supervising construction work.· Controlling electrical project construction costs and project variations.· Carrying out tasks / projects assigned by the Electrical Department in Germany and other ad hoc projects as required by the Director of the Dublin office.
- SalaryMarket related
- LocationKansas City
As an I&C engineer, work with a team of I&C engineers and designers, and other disciplines, to perform detail engineering, including front-end planning work, develop I&C quantities and cost estimation, conduct conceptual studies, perform technical quality reviews, attend Factory Acceptance Testing (FAT), and support construction & commissioning activities . Work under a direct supervision of an I&C lead or work independently on smaller projects or standalone activities. Knowledge of instrumentation and control systems (PLC/DCS) is required.Prepare instruments and control system specifications, instrument inquiry/bid packages, technical bid summaries, and purchase recommendations.Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.Participate in the development of P&ID's and equipment/construction subcontract package specifications.Develop instrument index, I/O list, cause & effect and logic diagrams, and control narratives.Work with the India I&C team and other disciplines to produce I&C engineering and design deliverables.Work with clients and vendors for information required to complete engineering design deliverables on schedule and building long working relationship.Interface and support construction personnel directly from the office and support construction and pre-commissioning activities in the field, as required.Work with SmartPlant Instrumentation (SPI) and other smart tools to produce engineering and design deliverables.Able to support construction and startup & commission activities in the field, as required Requirements: Bachelor's degree in Electrical Engineering, Mechanical Engineering or Chemical Engineering from accredited program required.Engineer-In-Training (EIT) Certification recommended.3 years related experience. Completion of master's degree in related field may be substituted for one year of experience. Strong analytical and problem-solving skills.Attention to detail.Ability to clearly communicate both verbal and written technical information.Must be proficient in the use of computer software (i.e., MS-Word, Excel, PowerPoint, Access).Valid driver's license required. Must be willing and able to obtain, or currently hold a valid Transportation Worker Identification Credential (TWIC).
- Salary£27.1k - 54.3k per year
Senior Petroleum EconomistJob description- Overall responsible for Upstream assets and development projects economic valuation in SMJSB.- A member of SMJ EP team, reporting to SMJ Upstream Director, working together with other members of SMJ EP team and assisting SMJ's Upstream Director to deliver SMJ EP business objectives- Responsible to develop, update and maintain petroleum economic and financial models, perform regular quality checks to ensure models are bugs free, accurate and efficiently organized and documented for quality control and audit trail purposes- Responsible to organize and quality check on input data and assumptions, on technical and financial, to the economic and financial models and quality check on output data to make sure modelling and calculations are error free prior to releasing results to stakeholders- Responsible to perform exploration and late life asset economics both using deterministic and probabilistic approach- With the support and input from external consultant, carry out comprehensive economic evaluations backed up with appropriate commercial terms in all Upstream asset acquisition exercise.- Responsible to prepare and report out, make presentations to management team on results and recommendations on economic and financial evaluations- Contract holder and manager for engaging external consultants on inputs to Upstream economic and fiscal terms modelling.- Actively participate in company's HSE and CSR initiatives and programs that include but not limited to, safety observations and HSE Trainings, community and society contributionsQualifications and Skill:- Minimum with Bachelor's degree in petroleum engineering or equivalent engineering or economics- Min 15 years' experience in the Oil & Gas company with considerable experience in petroleum economics- Experience in Upstream commercial negotiation would be an added advantage- experienced in managing wide range of petroleum economics and fiscal terms in Malaysia like PSC and PITA terms, cost recovery, ARO issues etc..- experienced in managing wide range in exploration (EMV approach), project FIDs (incremental approach) and production economics (enhancement, efficiency and Late Life Assets).- Strong and fast in Microsoft office tools and good data management skills- Strong analytical and strategic thinking skills and the ability to draw and support technical and commercial conclusions. - Good communication and presentation skills, strong interpersonal skills. Ability to express professional opinions both orally and in writing. - Able to mentor junior petroleum economist staff in EP works. - Able to cope with high pressure working environment in fast turnaround and off office hour works.
- SalaryMarket related
Responsibilities Assist process engineering design and coordinate process engineering deliverables with Engineering firm Including, but not limited to: Review vendor equipment approval drawings with focus on interface management between vendorsReview/approve PIDs generatedReview/approve PFDs generatedReview/approve Area Process Narratives/Functional descriptionsReview/approve Equipment specificationsReview/Approve Instrumentation specificationsReview/approve project Basis of Technical DesignReview/approve mass and energy balancesPerform project engineering role with focus on schedule and on facilitating clear communication between the various stakeholders on technical barriers to design advancement.Support construction efforts by answering technical questions and providing quality control oversight on installation and startupAssist with equipment layout developmentProvide technical assistance to procurement and project management with equipment bidding process, including package documentation, bidding, Total Cost of Ownership (TCO)s and bid comparisons. Generate project mass and energy balancesReview and provide feedback on equipment, line, valve, specialty item and instrumentation lists generated by Engineering firm.Ensure project compliance with engineering and equipment standardsApply process safety management (PSM) experience to assist with items such as management of change (MOC) and pre-start up safety reviews (PSSR).Interface effectively with commercial, safety, accounting, legal, environmental, engineering, QA/QC, process safety management, and procurement to assist with project needs.Develop plans for commissioning/start-up and assist in executing same. Education/Experience/Skills Required Bachelor’s degree in Engineering or applicable related field.5 to 10 year total industry experienceMinimum of 5 years experience with field work or operations or constructionMinimum of 5 years experience working with Process Safety principlesExperienced in using TEAMS, Microsoft Word, Microsoft Excel, Visio and PowerPointExperienced in using Navisworks 3D viewing softwareBuilds Shared Vision
- SalaryMarket related
Job Decriptions Provide reservoir engineering expertise, including expertise in field development planning, reservoir modeling/simulation, economic evaluation, feasibility studies, and due diligence.Expertise in conducting reservoir engineering analysis and economic evaluation utilising technical and economic software packages (Petrel, Eclipse) or industry-equivalent software packages. Assess and evaluate option to optimise production and recovery utilising data acquisition, interpretation, and analysis as well as techniques such as static and dynamic model utilising reservoir simulation software, well test interpretation, reservoir surveillance (KAPPA Suite, OFM, etc.), and well performance modelling. Contribute to the evaluation, classification, and audit of reserves and resources in accordance with the SPE Petroleum Reserves Definitions.Collaborate with multidisciplinary teams to identify, execute, and optimise well performance opportunities.Supervise and provide direction for drilling and field production operations. Requiremnts Technically proficient, with an MSc in reservoir engineering, petroleum engineering, or geosciences. Minimum 8 years of relevant practical experience in Geomodelling/Reservoir engineering from an E&P company and/or oilfield services company, with proficient skills in using Petrel and flow simulators like ECLIPSE and similar tools.Curious, self-driven, willing to learn and share knowledgeStructured, analytical, and proactive approach to solving business problems and client challenges. Energetic team player, willing to travel. Programming skills such as Python are desirable.Proficient in English (written & spoken).-Malaysian only / Right to work in Malaysia.
- SalaryMarket related
Bachelor’s degree in Engineering in Petroleum / Mechanical / Process or equivalent.10 years’ experience in well services / petroleum engineering and operations.Broad knowledge / engineering expertise in all related disciplines in well completion such as geology, reservoir, drilling, production, etc.Ability to integrate and communicate with specialists of corresponding disciplines.