Rig Mechanic
- Location: Queensland
- Salary: $850 per day
I am currently resourcing for one of my top onshore drilling clients. They require a Rig Mechanic for the following project:
Field Service Mechanic
2/2
QLD based - Toowoomba is base/workshop and Point of Hire
Looking after 3 rigs in total
Provided field service truck
ASAP start
Requirements:
LR Drivers Licence
IFI
AUS Trade Certified
Australian Resident
If you are interested in the role please reach out and send your resume to lewis.houghton@spencer-ogden.com
The ideal candidate for Senior Mechanical Engineer will be responsible to lead the planning, execution, monitoring and control of the maintenance of assets; in line with the Company's key business goal. Provide daily technical support to rigs under remitAssist with technical downtime issuesLiaise with OEM's as requiredTravel offshore to assist in technical problem solving and troubleshooting as requiredAssist with technical audit function in relation to maintenance and technical proceduresAssist with PM development as requiredAssist with annual budget preparationAssist with offshore minor projects and rig modificationsAssist rigs in follow up to ensure compliance with Technical MOC procedureAssist with follow up on onshore equipment repairs as requiredAssist with client related technical issuesCarry out rig familiarisation visitsAssist with Project Engineers when requiredAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all rig mechanical systems and controls fleet wideBe prepared to travel worldwide at short notice when requiredLead safety by example for all employees to followPromote safety awareness and safe work practice among all the personnelReport all hazards and positively intervene in all observed unsafe actsParticipate in emergency drills, including post-drill debriefs Candidate should fulfil the following: Preferably a degree in Bachelor of Engineering (Hons) in Mechanical and minimum 5 years' experience in technical support and or project engineeringFamiliar with computerised control systemsExperience on /with Offshore Drill Rigs and Rig equipment and TroubleshootingSound knowledge of rotating equipmentSound knowledge of hydraulic controls and systemsTrained in Mechanical trade or engineering degree
Position Summary To provide technical equipment engineering advice and support to offshore operations (Ops), onshore discipline & maintenance engineers, and production engineering teams. Develop and optimize maintenance strategy and program in accordance with business objectives and KPI, as well as providing short to long-term strategies and plans to continuously improve reliability and availability to ensure rotating equipment ops maintenance activities are executed in a safe, timely and cost-effective manner. Responsible as the Technical Authority for rotating equipment and turbomachinery ops and maintenance. Principle Accountabilities 1. HSSE a) Responsible for HSSE and Regulatory Compliance within their relevant discipline to provide leadership support to achieve goal zero for the organization. b) Ensures HSSE issues are given primary consideration in all activities undertaken within area of responsibility, based on the ALARP principle. c) Maintain technical assurance for SCE and Process Safety items concerning the discipline. d) Actively support and provide technical know-how in technical studies and failure investigations, Process and Instrument diagram reviews, Safety Integrity Level (SIL) assessments and HAZOP's etc. e) Ensure surveillance audits are conducted on SCE related PMs to ensure the assurance task as per the Performance Standard are met. f) Ensure verification tasks are completed as required by the SCE Performance Standard. 2. Accountability a) Be accountable as the Technical Authority, for all rotating equipment on the facilities and analyze and approve deviations from standards and practices, as required. b) Owns Rotating Equipment Engineering as Subject Matter Expert (SME) and act as the primary source of knowledge, techniques and expertise within the area to provide professional and technical insight for design, engineering, and complex troubleshooting activities. c) Develops and manages the delivery of technical excellence within Rotating Equipment Engineering, and liaises with engineers, leads and senior managers within maintenance and ops to develop and strengthen assurance processes to ensure uninterrupted plant operation. d) Provide recommendations, steer & direction to contractors, maintenance team and offshore personnel regarding mechanical rotating equipment O&M management to optimize equipment and associated machinery usage to the assets. e) Executable rotating equipment tasks and targets based on optimization of costs and available resources. f) Facilitate/lead/participate any incident or defect elimination investigation according to defined methodologies with the relevant teams. g) Accountable for review and update of performance standard sections related to rotating equipment. h) Strategize optimum engineering & maintenance methodologies for effective medium and long-term life and performance. i) Provide assurance for regulatory and industry compliance j) Provision of support that will be multidisciplinary in nature k) Responsible to assess condition of rotating equipment based on baseline developed earlier, and lessons learns from other plants/site through LFI l) Carries out Troubleshooting/Inspection to establish root causes of failure (RCFA) and prepare Corrective Maintenance plans/options m) Proposes and develops in cooperation with Maintenance/Reliability Group reliability and safety improvement projects for the asset n) Recommends design upgrades of rotating equipment and systems as required to improve Asset Integrity o) Establish FMEA and maintenance strategy and conduct continuous improvement program, facilitate Reliability Centred Maintenance (RCM) exercise, oversee continuous KPI monitoring and reporting methods p) Responsible to review and provide assurance scopes for turbomachinery and critical equipment on Long Term Service Agreements 3. Maintenance tasks a) Provide scope, review effectiveness, and approve turbomachinery and critical equipment contract on CSA/ LTSA in supporting Maintenance team as Contract Holder b) Review and approve and inspect parts repair at vendor workshop c) Review and approve and inspect equipment undergoing factory acceptance tests (FAT) for equipment d) Carry out assurance verifications to have effective PM and CM tasks implemented for all rotating equipment e) Review the Quality of Execution of maintenance activities such that Preventive Maintenance, Inspections and Corrective Maintenance job routines are executed in accordance with the agreed work management plans, based on best practices for the industry f) Develop optimum maintenance tasks for new rotating equipment on the facilities and ensure tasks are incorporated in CMMS g) Identify and plan potential defects elimination for defects relating to leakage, looseness, vibration, excessive heat, missing or broken parts and wrong materials h) Provide with fit-for-purpose maintenance strategies in line with the company's set-up and capabilities 4. Technical Advice and Support a) Provide guidance, support and technical advice to Ops group concerning rotating equipment and to act as Technical Authority, to review and approve deviations from standards and practices b) Technical support for the frontline crew is to be expected during all reasonable times 5. Management of Change a) Make & Review recommendations to organization concerning changes in work scope, job specifications, task descriptions, CMMS scheduling, task instruction relating to rotating equipment to ensure that these offshore equipment function safely and efficiently b) Provide support to other disciplines 6. Material Identification and SCM Assistance a) Assist in resolving material identification, procurement problems, managing warehousing management and improvements 7. Contract management / development a) Liaise with vendors as part of long-term service contracts, ensure contract terms & conditions are fulfilled b) Define technical working scope and evaluation procedure. Appraise bids and provide advice to line organization of best "all round" offers regarding materials, equipment, and procurement c) Manage key contracts Price Agreements and for contractor teams in order to ensure that offshore rotating equipment continues to function safely and efficiently, within budget and available resources 8. Bid Evaluation a) Provide Bid evaluation criteria to project team on selecting new equipment b) Assist in evaluating bids and provide advice to the organization of best "all round" offers regarding on-site and off-site repairs and materials procurement for rotating equipment 9. Budget Preparation/Cost Control a) Assist in the preparation of engineering & maintenance budgets and controlling costs within approved budget limits b) Contribute to cost savings/ avoidance effort with maintenance optimization exercise 10. Planning & RCAs a) Participate in major maintenance planning, including leading risk assessments and providing lead technical inputs for RCAs b) Multidisciplinary knowledge is expected at this job level and as such, its corresponding site support 11. Quality Assurance/Audits & Surveillance a) Participate in qualifying contractors and performing quality assurance surveys b) Strategize and perform audits as necessary. To ensure that the machines meet the required standards set per code or OEM or Industry best practices c) Provide and approve QAQC verifications of repair work for rotating equipment 12. Continuous Improvement: a) Work with maintenance & production teams to optimize the quality of O&M. Optimize and revamp obsolete practices that will remove redundant & overly conservative work b) Improve and update and make executable Maintenance and Operating philosophies and strategies c) Introduce best practices from other industries and operating units to improve current practices to strive for safer, better, and cheaper technologies and best practices 13. Requisitions and Work Orders a) Write work orders for appropriate maintenance tasks when necessary b) Suggest and approve material requisition proposal by maintenance team, aligning with ops and maintenance strategies to maintain optimized but adequate inventory levels c) Write and assist facilities engineering and project team to new project scope relating to rotating equipment d) On larger or critical jobs verify job preparations are done properly, and jobs are closed out effectively with lessons learned recorded Requirements 1. Minimum Bachelor's Degree in Mechanical Engineering Discipline 2. Minimum 10-15 years of working experience in Rotating Equipment engi
The ideal candidate for Senior Electrical Engineer will be responsible as the Technical Support Engineer to facilitate asset reliability and ensures uptime of the vessels; in line with the Company's key business goal. Provide drilling fleet technical supportAssist and lead on technical downtime issuesLiaise with OEM'sInvolved with annual equipment inspectionReview vendor quotations and costings for major equipment repair. Prepare overhaul work-scope for major equipment to ensure OEM correct and accurate pricings on repairs and overhaulsPrepare repair work-scope for capital equipment (5 yearly)Regularly review, development and updating of the planned maintenance system (Star) for electrical equipmentTravel offshore to assist in technical problem solving, repairs & troubleshooting as requiredAssist with annual budget preparation for capital equipment expendituresAssist with and ensure compliance of TMOC procedureAttend equipment D&I/commissioning at vendor facilityAssist with client related technical issuesCarry out rig internal technical auditsAssist Projects/Newbuilds EngineersAssist HOD with the design and implementation of troubleshooting guidesParticipate in duty phone roster system for technical issues outside office hoursBe familiar with all systems, directives and procedures and actively participate in the implementationBe familiar with all electrical rig systems and controls fleet wideBe prepared to travel worldwide at short notice as and when required Candidate should fulfil the following: Preferably a Degree in Engineering (Hons) in Electrical & ElectronicsMinimum 10 years of experience holding the role of technical support and/or project engineering in O&G industryTrained in the following: LTI Driller/ Draw works Control Course; LTI Top Drive Control Course; Advance Siemens PLC STEP 7 Programming Course; Siemens & ABB VFD Course; Siemens PLC STEP 7 Programming Course; TDS- 8SA Top Drive Course; C++ Programming; MD Totco Drilling Instrumentation Course; Ex Certified; NOV Amphion Control System; HVAC CertificateExperience in offshore drilling or upstream industry with hands-on experience in drilling systems is a plusHighly skilled and efficient trouble shooter
We are currently looking for a Drilling HSE Specialist to support for a short term project in Malaysia. The candidate must equipmed with Drilling operation background whom can contribute as HSE Specialist. The candidate should also be able to advise on the DO's & Dont's on the rig floor during operation with HSE hat. Project Commencement: 1st March 2024Duration: 6 months Location: Malaysia
Minimum Diploma in any discipline, preferable in Engineering background or SPM with at least 8 years maintenance experience in E-Line Operations or relevant oil and gas industryStrong knowledge of engineering, mechanical and electrical conceptGood management and organizational skills Good communication skills in both English and Bahasa Malaysia Good writting skills in both English and Bahasa MalaysiaAble to communicate effectively with all level Must have at least 5 years in perform maintenance of mechanical and electrical equipment Several years of experience in maintenance management, particularly in the field of mechanical, electrical and electronics systems Experience in managing supplliers
Job Description: Primary responsibility of the position is to act as a project engineer and project support engineer for capital projects to ensure proper measurement design and mechanical design.Provide technical expertise in measurement equipment (Ultrasonic meters, Coriolis meters, Orifice meters, Gas Chromatograph, fuel meters, H2O Analyzer, H2S Analyzer, O2 Analyzer, CO2 Analyzer and Hydro Carbon Dew point Analyzer) with capital project execution with support on installation, diagnostic, configuration and troubleshooting of said equipment.The engineer frequently coordinates with other internal departments including; within our own MR&C engineering, pipeline engineering, storage and compression engineering, Operations, Supply Chain, Project Management, Project Controls, Customer Account Managers, Customer Deliverability, Operational Technology, Gas Control and many others.As a project engineer, the individual's responsibilities include, but may not be limited to the following: 50% Project scoping, design engineering and design review/support30% Equipment/material procurement and Construction coordination/support10% Equipment specification and development of department standards10% Field/O&M technical support Basic Skills/Requirements: Excellent communication skills (both verbal and written)Technical writing experience in writing engineering specificationsAbility to work on a team with diverse experiences and responsibilitiesProject Engineering ExperienceAbility to access, diagnose, and close gaps in process and projects (problem solver) Skills: The following skills and experience will set you apart from others: Familiarity with Michigan Gas Safety Code Masters or other advanced degree, ideally in a technical or scientific field of study Energy industry background that includes natural gas chromatography and metering equipment Knowledge gas measurement equipment and electronic flow measurementKnowledge of codes such as AGA, API, PHMSA, and gas measurement codesProfessional Engineering (PE) licenseComputer software and programs: microsoft office suite, SAP, Arriba, Measurement software Education: Bachelor's Degree in Engineering field - Mechanical preferred.
Bachelor’s degree in Engineering in Petroleum / Mechanical / Process or equivalent.10 years’ experience in well services / petroleum engineering and operations.Broad knowledge / engineering expertise in all related disciplines in well completion such as geology, reservoir, drilling, production, etc.Ability to integrate and communicate with specialists of corresponding disciplines.
Work Authorisation & Permit to Work Manager - working alongside an industry leading client on a nuclear power plant project. Job Duties Supervise daily permit office operations to ensure compliance with established processes and standards.Foster and maintain relationships with construction, safety, and technical teams, delivering crucial performance data.Contribute to the creation and maintenance of innovative procedures and standards.Facilitate effective communication with senior management.Ensure the competency of permit acceptors and oversee training programs.Generate audit reports, identify non-compliance issues, and implement corrective actions.Review and adjust standards, policies, and procedures as necessary. Requirements:- Degree in Mechanical or Electrical Engineering or similar- NEBOSH Diploma or equivalent.- IOSH Managing Safely in Construction.- Proficient in managing diverse construction projects and coordinating contractors.
The Construction Superintendent is responsible for field operations on the assigned project(s) in order to achieve safe, timely and profitable completion of each project. Plans, organizes, and supervises building and related facilities portions of construction work for an assigned area of a construction project. Responsible for the construction planning of the construction related activities of the subcontractor and/or self-perform to confirm the completion of contractual construction activities. Maintains continuity of safety, job progress and maximizes efficiencies related to the assigned area. - Responsible for the oversight of the following project work activities: site earthwork and layout, concrete flatwork and foundation, structural steel, steel and wood framing, interior finishes, millwork, roofing, plumbing, HVAC systems, fire protection, and commercial electrical systems. - Responsible for overall supervision of construction effort, which includes: safety, productivity of crafts, efficient use of materials and equipment, materials management, scheduling, design, and contractual performance of the project. - Responsible for subcontractor contractual compliance and/or self-perform on designated construction related activities. - Build effective client and subcontractor relationships. Interface with client representatives, A/E representatives, and other contractors. - Responsible for managing QA/QC documents, inspection logs, as built drawings. - Support the completion of turnover packages. - Collaborate with project management to develop and implement project procedures, working documents, and standards. - Authorize purchase requisitions, field design change requests, etc., under supervision of Construction Manager and Project Manager. - Responsible for project safety. Reviews and audits site specific safety documentation, including Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis. - Complete daily field reports and take daily pictures to document construction progress. - Assess future work activities and identify any concerns with work plans by utilizing subcontractors 3-week look ahead report. - Develop a marked-up and as-built set of drawings to produce the record set documents, and answer RFIs with assistance from Assistant Project Manager or Field Engineer. - Direct and manage subcontractor or self-preform subsidiaries as necessary to comply with the established project schedule, and track and verify progress on an installed quantity and work hour basis. - Oversee the construction of complete buildings and/or structures. - Develop punch lists of items out of compliance or not completed. - Verify the most current drawing revisions are being used in the field. - Utilize project construction management tool(s). - Read, interpret, and understand civil, foundation, structural, architectural, mechanical, electrical, and plumbing drawings.- Performs other duties as assigned - Complies with all policies and standardsRequirements:- Bachelor Degree and 7 years construction management experience or craft supervision experience on similar projects. Required or - Associate Degree and 9 years construction management experience or craft supervision experience on similar projects. Required or - High School Diploma/GED and 11 years construction management experience or craft supervision experience on similar projects. Required - Must have excellent communication skills, strong leadership skills, and a strong safety background. - Computer proficiency in Microsoft Suite. - Must be able to meet company's driving requirements EEO/Minorities/Females/Disabled/Veterans