Secondary Design Power Electrical Engineer
- Location: Sydney
- Salary: Market related
Power design electrical engineering opportunity, specialising in the design phase within the offices in NSW, Sydney.
Working in the tier 1 company environment, exposure to competitive technical development.
12 month contract basis with possibilities to result to permanent full time employment.
- Overhead transmission and distribution exposure.
- Autodesk, AutoCAD design software experience.
- Senior role 8 + years experience in similar role.
- 40 hour working week, in design office.
- Competitive market rates.
Any interest in the role please forward CV to firstname.lastname@example.org or call: (08) 6245 9478
** Only US based candidates will be considered. NO SPONSORSHIP availableThis is a remote opportunity. Work from home anywhere in the United States. You will be expected to work PST hours.This is a 12 month contract to direct hire opportunity Job Title: Senior Power Generation EngineerWe are looking for a highly experienced Senior Power Generation Engineer to join our team. As a Senior Power Generation Engineer, you will be responsible for performing complex engineering work in the design, construction, and maintenance of District Power Generation facilities. You will manage engineering and construction projects through their design and construction phases, ensuring compliance with policies and regulations of outside regulatory agencies that apply to District operations. Additionally, you will supervise and develop staff, provide technical and functional supervision, and ensure quality assurance of work.Responsibilities: Perform complex professional engineering work in the design, construction, and maintenance of District Power Generation facilities.Ensure compliance with policies and regulations of outside regulatory agencies that apply to District operations.Manage engineering and related construction projects through their design and construction phases.Supervise and develop staff, provide technical and functional supervision, and ensure quality assurance of work.Assist in long-range capital improvement planning and budgeting.Represent the District in the community and at professional meetings as required. Requirements: Bachelor's degree in EngineerFive years of increasingly responsible professional engineering experience.Ability to perform technical engineering work of a complex nature.PE license preferred but not requiredKnowledge of principals and practices of organization, administration, budgeting, and personnel management.Strong project management skills.Ability to establish and maintain cooperative relationships with both internal and external contacts and communicate clearly and concisely, both orally and in writing.Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers, and management. If you meet the requirements and are looking for a challenging role in a dynamic environment, we encourage you to apply.
Senior Electrical engineer - Permanant/Full-time Reporting to the Lead Electrical Engineer, this role is responsible for providing electrical engineering leadership to ensure the project maintains compliance with Legislative, technical and HSE requirements to minimise risk to the business, its employees, and key stakeholders. Key Responsibilities· Investigate problems with electrical systems and develop projects and plant modifications (MoC’s) to address identified issues.· Facilitate design and project reviews, including HAZOP, HAZID and safety reviews.· Review high level designs and estimates of electrical engineering activities for future project proposals.· Provide support for evaluation for selection of preferred technology and subsequently preferred suppliers as part of the contract’s evaluation process of project development.· Prepare and check engineering designs, estimates, proposals, standards, and operational guides with other disciplines for operations and projects.· Provide support for electrical engineering deliverables on projects including the review of contract documentation and drawings provided to project manager for its comment by contractors, option studies, technology selection and selection of transmission point connection.· Work closely with technical development teams and liaise with other organisational disciplines to develop engineering designs, standards, and guides for operational and project-based work.· Prepare technical specifications, equipment datasheets and calculations, including HV/LV switchgear, distribution equipment, control systems and electrical protection settings.· Provide support for managing interfaces between the project or site and various Regulatory bodies including network service providers under statutory requirements for a project.· Provide technical assistance in the ongoing monitoring and administration of contracts, including the raising of requests for information and the assessment and recommendation of claims for payment from suppliers.· Provide supervisory and technical assistance for any on-site commissioning work.· Provide mentoring to graduate electrical engineers. Qualifications and Experience· Formal engineering qualifications at engineering degree level in Electrical engineering with a minimum of 10 years’ experience following graduation.· Member of the Institution of Engineers, Australia, CPEng.· Member of the Board of Professional Engineers Queensland, RPEQ.· CPR/LV rescue.· Experience in power system and earth grid analysis using modelling software.· Experience in industrial power generation, protection design and control systems.· Hazardous Area Design and Classification (desirable).· Experience with the requirements of the National Electricity Rules for Generators (desirable).· Understanding of electrical safety, functional safety (AS61508/61511) requirements (desirable).
Location: Singapore, Kallang1 Year contractPosition of: Thermal & Mechanical EngineerKey Responsibilities:- Perform and checking of mechanical and thermal design of power plant equipment ie. boiler, turbine, pressure vessels, heat exchangers, piping, structures as per international standard, codes and project specification/requirement- Supporting project development with preliminary designs for Power Plant equipment for quotation and clarification- Perform shop survey to solve fabrication issue and for as built drawing - Managing/supervision of all site installation and commissioning activities Requirement:- Degree in Mechanical, Thermal and/or power energy- Minimum 5 years of relevant working experience in energy industry- Good knowledge of entire power plant / process system- Good planning, organizational and trouble-shooting skills with site experience- Possess excellent team spirit -Able to travel abroad on short notice and station on site on case-to-case basis Interested applicants please send CV to email@example.com
**ONLY US BASED CANDIDATES WILL BE CONSIDEREDWe are seeking a highly qualified Electrical Engineer with a Bachelor's Degree in Electrical Engineering and at least 5 years of experience in physical / primary electrical design for high voltage substations. A Master's or Ph.D in Electrical Engineering plus 3 or more years of relevant experience is also acceptable. The candidate should be proficient in specifying all types of HV and MV equipment used in substations and have expertise in AutoCAD.Excellent communication skills are a must as the candidate will be responsible for collaborating with clients, subconsultants, and subcontractors. Additionally, the candidate will be required to develop 3D layouts for HVDC and FACTS substation projects, including electromechanical design, development of general arrangement, layout and elevation drawings considering electrical and mechanical parameters of the project.Other duties include performing cable ampacity, grounding, lightning, illumination, and station auxiliary load calculations, creating equipment specifications and detailed bill of materials, and developing 3D layouts for AIS, GIS and FACTS devices. The candidate will also be responsible for ensuring that engineering deliverables meet schedule dates and should inform the Project Manager of possible delays or risks in the project design.The ideal candidate should be willing to travel locally and internationally to attend customer meetings and project sites, with an estimated travel time of 20%. This is a fully remote, work from home opportunity. (anywhere in the United States) ** NO sponsorship availableThis is a 6 month contract to direct hire opportunity, which includes W2 benefits with employer paid medical and dental insurances during the contract duration. After the 6 months, you will be brought onto the companies benefits, PTO and bonus structure package.
#Responsibilities -? Responsible for Operation and Maintenance activities of Solar plant.? Responsible for Co-ordinating with O&M operator along with other local bodies? Should be having understanding on basic solar plant data analysis.? Performing inspection, testing, troubleshooting / repairs on site including PV DC operations, AC HV (upto 220kV)/LV systems, Network communications and monitoring Inverter diagnostics and repairs.? Identify problems and develop corrective action plan as per OEM recommended procedures.? Responsible for generating schedules and carrying out preventive maintenance activities as per schedules.? Provide timely reports from field operations, status and constructive feedbacks as required.? Responsible for generating Production/MIS reports, log reports etc. as prescribed.? Adhere to Quality, Health & Safety policies at site.? Interaction in coordination with O&M operator with various vendors, OEM's, stakeholders, etc.#Skills_Required -? Professional knowledge: Good technical & operational knowledge of Solar plant and the equipment's installed in the solar plant.? Should be a problem solver.? Analytical Skills: Posses good analytical skills to analyse the performance of solar plant viz - projected KPIs vs Actual KPIs.? Communication Skills: Good communication skills in English / Malay, write and speak clearly.? Computer Proficiency - Good command on MS office, Excel, Power point, etc.Qualifications -? 3 or 4 years of regular or part-time Engineering Degree / Technology Degree in Electrical or Electronics or both.? Should have knowledge and worked in Solar parks for at least 04 - 05 years.? Good command over English language.? Proficiency in Malaya Language will be an additional benefit.? Beneficial if candidate possess a 132kV or 33kV Electrical Malaysian Lic.
Initial 3 Month Contract to perm opportunity for a highly experienced Electrician to join a major national OEM in Western Australia. The New Role Involves: • Carrying out and completing preventative and reactive maintenance requirements on live projects • Planning for major and routine outages in line with client and company requirements • Liase with team members in recognising improvements and efficiencies in activities, processes, and plant • Recording daily operational information, completing service orders, stocktaking, ordering parts and materials What You’ll Need to Succeed: Electrical qualification - A-Grade Electrical and Australian recognised Current First Aid, CPR and LVR certificate Forklift licence, High Voltage Switching and Dual trade mechanical all desirable 5 years experience within the power industry, experience in operating or repairing diesel power generation equipment. Specifics: Monday - Friday, with paid overtime and travel allowance Equipment provided: Laptop, Mobile phone, Credit card and use of site car for work purposes (Vehicle allowance) How Do I Get This Amazing Job: Please forward your most current CV to firstname.lastname@example.org or call Amy on (08) 6280 2423 for more information.
Looking for experienced electrical service technicians for local role Sydney. Role will service, maintain and install generators, temperature controls and power rental assets. Rates including overtime with penalty rates Monday to Friday.An ideal candidate will have:- A Grade Electrical licence- Experience within the power generation industry- Excellent electrical troubleshooting skills- Current drivers licence and forklift license.- Current first Aid, CPR and LVR certificateIf you are interested to know more about this opportunity or know of anyone who may be interested please get in touch for a confidential discussion on 08 6280 2423!
Looking for experienced electrical service technicians for local role in Newcastle.Role will service, maintain and install generators, temperature controls and power rental assets. Rates including overtime with penalty rates Monday to Friday.An ideal candidate will have:- A Grade Electrical licence- Experience within the power generation industry- Excellent electrical troubleshooting skills- Current drivers licence and forklift license.- Current first Aid, CPR and LVR certificateIf you are interested to know more about this opportunity or know of anyone who may be interested please get in touch for a confidential discussion on 08 6280 2423!
Engineering Manager The position is to be filled for an undetermined period of time. Your tasks: Independent set-up and control of an engineering team within projects (engineering management) Implementation and coordination of construction projects in connection with process engineering/power plant-specific tasksPreparation of project phase-dependent documents (terms of reference, tenders, etc.)Preparation of cost estimatesParticipation in project meetings, negotiations, evaluation of bids and preparation of award recommendationsEnsuring quality assurance and quality control during the planning, tendering, construction and operation phasesSelecting and specifying CHP plant and heating plant components in accordance with international regulations and standards as well as internal Vattenfall standardsParticipation in inter-project and inter-departmental exchanges of experiencePreparation of meeting reports and presentationsIn this role, you report to the Project Manager within a project and to the Manager Execution Engineering, be a sparring partner for the project manager and the rest of the project management teamUsing "people Skills" to build and motivate engineering teams. Your profile Degree in process engineering, mechanical engineering, electrical engineering or power plant engineering and at least 5 years of professional experience in planning and project management. Experience in the operation of heating and combined heat and power plants is an advantageYour professional skills include a sound knowledge of power plant-specific processes in heat generation plants as well as the interface of generation plants to district heating networks, CCS is a plusYour personal competencies include leadership qualities and excellent analytical skillsYou work in a structured manner, are self-initiated and have good communication skillsGood focus on safety and safety in designYou have a very good command of Swedish and EnglishYou have experience in planning and engineering processes as well as in teamwork, including cultural sensitivityWorking on interdisciplinary topics and interfaces with other departments are obligatory for youTravelling is not a problem for you. Engineering Manager The position is to be filled for an undetermined period of time. Your tasks: Independent set-up and control of an engineering team within projects (engineering management) Implementation and coordination of construction projects in connection with process engineering/power plant-specific tasksPreparation of project phase-dependent documents (terms of reference, tenders, etc.)Preparation of cost estimatesParticipation in project meetings, negotiations, evaluation of bids and preparation of award recommendationsEnsuring quality assurance and quality control during the planning, tendering, construction and operation phasesSelecting and specifying CHP plant and heating plant components in accordance with international regulations and standards as well as internal Vattenfall standardsParticipation in inter-project and inter-departmental exchanges of experiencePreparation of meeting reports and presentationsIn this role, you report to the Project Manager within a project and to the Manager Execution Engineering, be a sparring partner for the project manager and the rest of the project management teamUsing "people Skills" to build and motivate engineering teams. Your profile Degree in process engineering, mechanical engineering, electrical engineering or power plant engineering and at least 5 years of professional experience in planning and project management. Experience in the operation of heating and combined heat and power plants is an advantageYour professional skills include a sound knowledge of power plant-specific processes in heat generation plants as well as the interface of generation plants to district heating networks, CCS is a plusYour personal competencies include leadership qualities and excellent analytical skillsYou work in a structured manner, are self-initiated and have good communication skillsGood focus on safety and safety in designYou have a very good command of Swedish and EnglishYou have experience in planning and engineering processes as well as in teamwork, including cultural sensitivityWorking on interdisciplinary topics and interfaces with other departments are obligatory for youTravelling is not a problem for you.
Permanent opportunity for an experienced Electrical Service Technician to join one of the world's largest temporary power companies in Gladstone, QLD. The New Role Involves: Preventing and scheduling maintenance of hire fleets for optimized performance as well as carrying out repairs. Providing technical support to the sale teams when required. Maintaining the levels of all required materials and ensure the appropriate tools are in place and maintained. Carrying out effective troubleshooting to minimise downtime. Contributing to optimum team performance and capability by providing quality workmanship to maintain and enhance the reliability of equipment. Maintaining and enhancing relationships and communication with internal and external customers. Working
**this is a 6 month contract to direct hire opportunity100% remote- work from home anywhere within the United States**NO sponsorship available! Only US based candidates apply! Overview:As a Senior Protection & Control Engineer, you will be responsible for designing and implementing protection and control engineering activities for high voltage substation and transmission projects. You will utilize your knowledge of protective relaying and control systems to contribute to EPC substation and transmission projects.Responsibilities:• Perform analysis and design of Protection Systems for HV substation/ and FACTS • Develop substation relaying & metering diagrams (i.e. Single line/A.C./D.C. schematic diagrams) • Develop the substation communication and network diagram • Prepare specification & Bill of Material for Protection/Control/Metering/RTU/ Communication Panels • Develop Protection and Control Panel layouts. • Develop Protection and Control Panel wiring diagrams. • Develop Cable Schedule for Substation. • Perform Factory Acceptance Test for Protection and Control Panels. • Perform reviews of work performed by others • Work closely with other engineering and design team members to coordinate overall design package and requirements • Perform relay coordination study and develop the relay settings file • Coordinate with supplier and contractors • Flexibility to travel locally and internationally to customer meetings and project sites, with an approximate travel of 25%.Qualifications:• Bachelor's degree in Electrical Engineering with a power systems emphasis from an ABET-accredited engineering program; Master's degree preferred. • 8 years or more of experience with a focus on protection/control/communications design for high voltage substations. • Experience in Communication Network Technologies • Experience in Communication protocols such as IEC61850, DNP, Modbus, … • Experience in writing and providing support documentation for relay calculations. • Knowledge on ANSI standards, IEC standards knowledge is a plus. • Experience with various vendor protective relay equipment typically used in substation. protection, including SEL, Siemens, GE. • Familiarity with Auto-CAD or Micro-Station. • Good communication skills. • Professional Engineering license is preferred. • Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers.
The Project Manager will lead and motivate a team of managers and workers in the day-to-day management of project safety, quality, schedule, cost control, contracts, subcontractors, suppliers, proposals, estimates, documentation turnover, client relations/management, field staff and other duties required to execute Engineer Procure Construct (EPC), Construction Management, Construction, and Program Management projects. The Project Manager oversees a project from inception to completion and may perform the role of EPC Project Manager or Program Manager, as well as support and provide guidance to others performing these roles as required by the specific project. Responsible for overall project execution and successful completion of projects on time and within budget.Essential Duties and Responsibilities include the following: Responsible for the oversight of all direct hire construction staffing for assigned project(s), which includes project labor and supervision requirements to ensure positions are adequately staffed. This includes effectively working with multiple crafts and their business representatives prior to project kickoff and throughout the duration of the project.Adhere to company's safety programs, training, and policies, as well as promote and manage the Safety & Health performance of project team members and subcontractors.Provides leadership and guidance in multiple facets of projects including safety, quality, procurement, construction, environmental compliance, project controls, and public/community relations.Develop new and manage existing client relationships while interfacing with the client as needed for proposal and project related items.May lead internal and external project risk reviews and consult with the Legal Department as required.May lead review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders.May lead client facing proposal efforts as required.Maintain client relations.Develop risk register and communicate to clients.Prepare internal/external risk mitigation communication plan.Implement the Project Execution Plan, including procurement and construction execution, the quality assurance plan, safety & health plan, subcontracting plan, project staffing plan, organization chart, and procurement plan. Includes training of new project team members on the PEP.May oversee the training of project teams, coordinate activities of multiple global practices/disciplines, and facilitate the efficient cost-effective utilization of staff while adhering to contractual and performance requirements.Lead and oversee the project plan for site mobilization and demobilization and support Site Manager with implementation.Analyze and communicate project status, risks, schedule and costs to all internal and external stakeholders.Lead and oversee the downstream request for proposal (RFP) and bid process and prepare detailed scope of work documents for supplier and subcontractor contracts, including recruiting, prequalifying, evaluating, recommending, and selecting subcontractors, and suppliers. Train new project team members on these processes.Manage downstream contract administration including request for information (RFI's), submittals, change management, contract closeout, and claims mitigation.Analyze and approve internal and external reports including project scheduling, budgeting, cash flow forecast, and project status reports.Present reports to internal and external executive management as required.Manage Prime Contract, subcontractor, and supplier invoicing process.Manage and audit the project documentation and filing systems.Perform project safety, quality, progress and financial audits and assessments as required.Lead and present at project and corporate meetings and ensure generation of meeting minutes.Create and oversee project non-conformance reporting process.Develop plan for and oversee project cost reporting, scheduling, work breakdown structure establishment, project set-up and closeout, and field progress tracking of project activities or program level activities as required. Includes training of new project team members as necessary.Support development of and oversee materials receiving and management process, including inventory control, receiving of goods, storage, and transportation.Work with superintendents and site manager to verify compliance of subcontractors and client contractors with contract documents, safety & health requirements, quality, and schedule.Manage and communicate financial aspects of projects to executive management, client, and others as required.Develop the plan for, and direct the project turnover documentation, warranty administration, project closeout, and recordkeeping/retention processes and procedure.Develop plan for and manage communication with governmental, industry, and public entities, and community relations on project related matters.Understand and implement plan to satisfy project permit requirements and regulations.Lead and participate in project planning, scheduling, estimating, cost development, and establishing critical project objectives.Lead and coordinate directly with engineering to establish development and distribution of engineering deliverables per project schedule and requirements.Review daily construction field reports as necessary.Understand and facilitate program-based real estate and ROW acquisitions.Report all employee relations issues and consult with the appropriate Human Resources Representative to resolve issues in a compliant and consistent manner.Provide mentorship as well as formal and informal training of interns, construction coordinators, and assistant construction project managers, construction project managers, engineers, and support servicesProvide performance feedback for each project team member to their respective Department Managers.Manage community and building trades relationships as necessaryLead the development and implementation of project labor agreements with building trades as required.Onboard craft/field supervision as required.Manage composite crew rates to determine labor and equipment costs.Manage staffing on projects.Manage labor burdens including craft classifications, benefits and labor laws.Maintain accurate craft classifications and craft progression records.Uphold craft competency and training standards.Estimate, forecast and manage craft install unit rates if required by project.Manage earned value, schedule, change management and cost metrics.Mentor and foster craft training and identify advancement opportunities.Manage construction equipment to ensure adequate inventory to complete projects.May be assigned to a project site as required.All other duties as assigned Requirements: Candidate MUST have Electrical PM background. Education and/or Experience: Bachelor's Degree in Construction, Construction Management, Engineering, Program Management, or a related field.Applicable experience may be substituted for the degree requirement.A minimum of 15 years relevant project manager experience in the construction industry. Capable of executing projects and achieving company certification as an EPC Project Manager and/or Program Manager. Computer Skills: Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint and Access).Experience with document control, scheduling, cost control and project management software is preferred. Travel Requirements: Significant travel up to 100% travel is required as necessary to support the execution of projects, training and other corporate requirements. Travel may extend over weekends and holidays. High probability of extended periods of travel may be required to support project execution for duration of project/program in the form of field assignments or relocation. Frequency of travel will vary based on the different project needs. Travel on short notice may be required. Schedule: - The base work schedule will be a five (5) day work week (Monday through Friday) with some exceptions based on the office or project location. Periodic weekend work and extended work days may be required. Business travel after regular work hours will be required. Night shift work may be required to support project execution.Projects require occasional long hours and infrequent days off, occasional night shifts or moderate to long periods of working consecutive nights. Other Qualifications: Excellent written and verbal communication skills and strong organizational skills.Strong analytical and problem solving skills, and attention to detail.Ability to handle large volumes of work and multi-task in a fast-paced environment.Multiple years of experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, transportation, or water is preferred.A basic understanding of Generally Accepted Accounting Principles.Must be able to meet company's driving requirements.